Lathem 2121 User Manual

Mechanical

Time Recorder

Model 2121

User’s Guide

Contents

Thank you for choosing the Lathem 2121 time recorder. Should
you ever need assistance, please let us know.

This guide contains all the information you need for setting up
and operating your new time recorder. Service information is
also included for replacing certain parts.

Ordering Accessories ............................................. 1

Start Here .......................................................... 2

1.

Mount Clock in Suitable Location ........................... 2

2.

Unlock and Remove the Cover............................... 2

3. Lift the Type Section ......................................... 3

4. Set the Printed Day and Time ............................... 4

5. Set Hands on Clock Face ..................................... 6

6. Advance Print Wheels and Hands ........................... 7

7. Lower the Type Section into Place ......................... 7

8. Test that Clock is Now Set Correctly ....................... 9

9. Close and Lock the Unit ...................................... 9

Change the Ribbon...............................................10

Change the Type Section........................................11

Change the Motor ................................................12

Trouble Shooting .................................................13

Warranty ..........................................................14

Model 2121 Time Recorder User’s Guide

Ordering Accessories

Lathem time recorders fulfill a wide range of timekeeping
requirements. For maximum results, only use Lathem accessories
specifically designed to fit your time recorder.

To purchase the appropriate accessories for your Model 2121
time recorder, contact your local Lathem dealer or visit us at:

http://shop.lathem.com

Description Part Number

Extra Pair of Keys VSM0976

Replacement Ribbon, 2-Colors 7-2CN

Time Card Rack, 25 Pockets 25-9G

Time Card Rack 12 Pockets 12-9G

Time Cards, Weekly (Box of 1,000) 1900L-C

Time Cards, Bi-Weekly (Box of 1,000) L-31-1D

Time Cards, Semi-Monthly / Monthly (Box of
1,000)

1790

Time Cards, Job Costing (Box of 1,000) 350

Replacement Timing Motor, 110V/60Hz K342

Page 1

Model 2121 Time Recorder User’s Guide

Start Here

Complete these steps to setup your new time recorder

This guide is available to download at:

http://www.lathem.com/support/product-manuals.aspx

1. Mount Clock in Suitable Location

Must be within 6 feet of AC power source
(unswitched) and conveniently located for your
employees. See attached instructions if you will be
installing on wall.

2. Unlock and Remove the Cover

Safety Warning: Do not plug the unit into an AC electrical outlet
until you are instructed.

2.1 Place the unit where you plan to mount or leave it.

2.2 Insert the key into the lock on the top of the unit cover.

2.3 Turn the key clockwise to unlock the unit.

Locked

Unlocked

Page 2

Model 2121 Time Recorder User’s Guide

2.4 Place your hands on both sides of the cover and pull it
toward you to remove it. A small amount of force may
be required.

3. Lift the Type Section

3.1 Locate the lock lever on either side of the type section
behind the clock face.

Page 3