Lasso Wizer Spinnit, EBM-S Instruction Manual

Spinnit EBM-S Single

Spindle Bench Model

Paper Drill

Instruction Manual

Before operating this equipment, please read these instructions completely and keep these operating instructions for future reference.

Serial Number:

Date of Purchase:

Dealer:

Address:

Telephone Number:

485 Hague Street, Rochester, NY 14606 U.S.A. Tel: [phone] Fax: [phone] www.lasscowizer.com [e-mail]

Table Of Contents

Introduction
Introduction.......................................................................	Page 02
Shipping Damage Inspection............................................	Page 02
Safety Information
Safety Instructions............................................................	Page 03
Warning Labels.................................................................	Page 03
Setting Up Your Machine
Loose Materials Inventory.................................................	Page 04
Back Gauge Assembly......................................................	Page 05
Stop Collars and Paper Side Stop.....................................	Page 05
Chip Bag...........................................................................	Page 06
Electrical Start Up.............................................................	Page 06
Operating Instructions
Drill Bit Removal and Installation......................................	Page 07
Leveling The Drill Bits.......................................................	Page 08
Drilling...............................................................................	Page 08
Clearing the Chips............................................................	Page 09
Tips On Drilling.................................................................	Page 09
Maintenance
Every 6 Months.................................................................	Page 10
Trouble Shooting Guide
Problem, Cause and Correction........................................	Page 11
Parts Diagrams
Front, Back, and Side View...............................................	Page 12
Interior Front and Back.....................................................	Page 13
Parts List...........................................................................	Page 14

Page 01

Introduction

Introduction

Thank you for your purchase of the SpinnitEBM-S Paper Drill. Lassco-Wizer has been designing and manufacturing proven performance equipment for the graphic arts, office, screen printing, sign, awards and engraving industries for over 60 years.

We ask that you take a moment to fill in the serial number and other information on the front cover of this manual. Please keep this manual as a reference for future use.

For parts and service please contact the Lassco-Wizer Dealer from whom you purchased the machine. If you require assistance in locating a Lassco-Wizer Dealer nearest you, please contact our customer service department at 585-436-1934. Please have the model of your machine and the serial number when you call.

If you wish to write to us please contact us at:

Lassco-Wizer

485 Hague Street

Rochester, NY 14606

Shipping Damage Inspection

Remove the machine from the carton and inspect for any shipping damage. If any damage is present, report the damage to the carrier immediately. Failure to do so may void any warranties.

Page 02

Safety Information

Safety Instructions

All operators must read and understand the Users Manual and all other safety instructions before using this equipment. If after reading the manual you are still uncertain about use, please contact a Service Technician for assistance. If you need contact information for a Service Technician nearest you please call 585-436-1934. Failure to fully understand the safety instructions can result in personal injury.

This machine is designed for one person operation. Never operate the machine with more than one person.

Safety of this equipment is the responsibility of the users.

Keep hands, hair, and loose clothing away from the drills.

Please read and follow all warning labels on your machine.

Always turn the machine off and wait for the drills to stop spinning before installing or removing drill bits. Keep hands away from drills when operating. PLEASE NOTE THAT

THE DRILL BITS MAY BE HOT AFTER USE. PROCEDE WITH CAUTION WHEN CHANGING THE DRILL BITS.

ONLY A SERVICING TECHNICIAN IS TO SERVICE THIS MACHINE.

Warning Labels

The following labels appear on your EBM-S paper drill. Make sure all operators understand and follow the safety instructions.

Please read and make sure that all operators understand the operators manual and all other safety instructions before using this equipment.

Keep hair, jewelry, loose clothing and any other items that could become entangled pulled back away from the machine when drilling.

Page 03