Laser SPK-QC002 User Manual
Product Feature
Set Time (At standby Mode)
Temperature Unit
Qi Wireless Charging Alarm Clock
Bluetooth Speaker
SPK-QC002
Mobile Charging Near Field Communication
Aarm Clock
Setting Button
Sleep Function
Play/Pause
Built-in Microphone
for Hand-Free Talk
Alarm1 Alarm2 AUX Line-in
Power Adapter
Digital Display
1A Output
Charging USB Port
NFC
MODE
Aux in,BT,FM
Mode
Time Setting
Button
Power Button
1. Tap the MODE/Time to make the hour blink,
Clockwise or anticlockwise turn MODE/Time to set the hour.
2. Short press MODE/Time again to make the minute blink.
Clockwise or anticlockwise turn MODE/Time to set the
minute.
3. Short press again MODE/Time or wait 15 seconds then
Setting have nished.
12 Hour/24 Hour Mode
While in current time display, Long press Alarm1 and
Alarm 2 at the same time to switch from 12 hour mode
to 24 hour mode.
Set Alarm (At standby Mode)
1.Short press the Alarm/SNOOZE button. The ALARM 1 icon
will show in the top right corner. The hour begin blink and turn
Mode/Time button for hour setting. Same operation to set
minute. Turn Mode/Time button for alarm sounds choice
(FM/F01/F02/F03) aftter nished setting alarm. Tap Alarm/Snooze
to nish and move to Alarm 2.
2. Same operation for Alarm 2 setting.
3. Long press alarm 1 or alarm 2 for turn on/o alarm.
21
To switch the temperature unit from Celsius to Fahrenheit,
short press alarm1 and alarm2 at the same time.
Snooze
1.Short Press the Alarm/Snooze button to snooze for 9 minutes
when alarm ring. snooze Z icon would be blink in the top right
corner. Long Press the Alarm/Snooze button to cancel the
SNOOZE function.
2.When the alarm sounds, short press/ turn Mode/Time to turn
o alarm.
Bluetooth Mode
1.Long Press MODE/Time button to power on. And enter the
bluetooth mode & BT indicator light will be blink on the LED
display. Meanwhile the blue Led light of bottom will be bright.
2.Open the Bluetooth of device and search SPK-QC002 in the
list of bluetooth for initial pairing.Will sounds little bell when
sucess pairing. Then can play the music of device. Short
press ALARM/SNOOZE button to pause the music play/
answer phone/ hang up phone.
3
Audio AUX Mode
1. Short Press the MODE/Time from FM Mode enter AUX
Mode. Aux indicator light showing on the LED display.
2. Use a 3.5mm audio cable to connect your portable media
device to the AUX Jack at back of the speaker.
FM Radio Mode
Short Press the MODE/Time from bluetooth mode enter
FM Radio mode. FM indicator light show on the LED display.
Long press ALARM/SNOOZE button will begin to search
the radio automatically. P01 will be showing on the LED
display when searched the radio.The rst radio will play
automatically after all radios has been searched. Turn
left or right of Alarm/Snooze button to choose the radio.
Qi wireless Charger(Android / Iphone)
In standby mode, put the mobile phone for wireless
charging on center upon of speaker. If your mobile phone can
not support wireless charger, will need wireless charger
receiver to completely charging.
NFC
Please open the NFC Function if your device support the
NFC. Then put the device touch the NFC position on upon
of speaker. It will connect the device automatically.
Usb charging (5V/3A output)
There are 3 USB ports at the back of the speaker. Simply
connect your portable device using a USB cable to begin
charging.
Build-ins storge music playing (3 songs)
1.In standby mode, Long press the Alarm/Snooze button and
aud1 will show on the LED display. Turn Mode/ Time button
to adjust volume. The aud1 music will be o automatically
until playing 30 minutes. Short press Alarm/ Snooze button
music o.
2. Choose aud2: Long press the Alarm/Snooze button, long
press again after saw aud1 on the LED display. Same
operation to choose aud3 music.
5
Specication
Driver: 5W*2
Wireless Range: 10 Meters
Frequency Range: 60Hz~18KHz
USB Charging Port: DC5V 3A
Build-in 3 sleep songs and 3 alarm sounds in system.
64
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and
workmanship for 12 months, from the date of purchase, provided that the product is used in accordance
with accompanying recommendations or instructions where provided. The benet of this warranty is in
addition to your rights under the Australian Consumer Law and to other rights and remedies of the
consumer under a law in relation to the goods or services to which the warranty relates. Through a
network of retailers and resellers, Laser will provide you with your choice of a repair, exchange (where
possible) or refund (within Dead on Arrival period) for this product if it becomes defective within the
warranty period. This warranty will no longer apply where the defect is a result of alteration, accident,
misuse, abuse, normal wear and tear, neglect or improper storage. Please retain your receipt as proof of
purchase How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be
veried, your place of purchase or Laser will make an assessment based on the date of manufacture, the
condition of the
Laser Product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or fund
the product as per their store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser. Customer Service with
details of your defective Laser Product:
Phone: (02) 9870 3355; or Email: support@laserco.com.au or online www.laserco.com.au/warranty (click on
“Consumers (End Users)”). Our business address is at 1/6-8 Byeld Street, North Ryde, NSW 2113
Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested,
send us the defective Product and a copy of your receipt. Laser will cover the cost of the return delivery.
Step 4: Wait for us to contact you. Once we have received your defective Laser Product for inspection, we
will inform you of our assessment of your claim within 7 days. When we contact you, we will rstly let you
know whether you have a valid claim under this Warranty, and if so, we will inform you whether your
defective Laser Product will be replaced or repaired, together with the number of days you can expect to
wait to receive your replaced or repaired Laser Product.
Step 5: For further details on warranty cover and returns, please check Terms and Conditions for Warranty
Returns section on http://www.laserco.com.au/warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Loading...