QUICK START
USER GUIDE
WIFI SMART SOCKET
MODEL NUMBER: PW-W3
Status Indicators
Red Fast Flashing: Wait configuration (First use only)
Red Constant on: Connected to Network. Power is ON.
Red Slow Flashing: Connected to Network. Power is OFF
Red and Green Fast Flashing: Reset required.
Red and Green Slow Flashing: Failed to connect to network
Green On: Connected, Power ON
Green Off: Connected, Power OFF
Download
and install
the
iWUHome App
Scroll
to the last screen and
press Start
Plug in your
WiFi Smart
Socket
into a mains power outlet and
press “Search Device”.
For
first time
connection
,
press
and hold the reset button until
the light starts flashing.
Enter
your
WiFi network
nickname name (SSID) and
password
Your app will now
scan and
connect to your Wifi Network
and your WiFi Smart Socket
E
nter in the
default
setup
password (123456). Note: When
successful, a confirmation message will
appear.
The below control panel
for the
device will then appear. View
power usage & set timers from this screen.
Press
“
back
” (previous image)
to
return to the main control panel
where devices are listed.
Swipe to
the right
to
open
editing options and the ON OFF
shortcut.
From the
Edit menu,
change
options for your Device
NickName, Password or Delete
a Device.
FAQ
Q: What should I do when the WiFi Smart Socket connection has failed?
A: a) Please check if the LED indicator is on and flashing
A: b) Please check if your Wireless router is working and if the password is correct
A: c) Please make sure the phone you are using supports the Wifi 2.4G frequency
Q: What if the password on my router has been changed or WiFi nickname (SSID)?
A: You will need to reset the Wifi Smart Socket and input the new password.
Q: How do I reset the WiFi Smart Socket?
A: Simply press and hold the reset button for 5 seconds or until the indicator starts flashing. This will also
remove any password. (Note: At this stage you can enter any new password).
Q: Can the App only control one WiFi Smart Socket?
A: No. The app can control many Sockets. Sockets can also be controlled by many devices using the same App.
Q: How do I change the password or nickname of my WiFi Smart socket?
A: From the main control menu, find your socket name and slide to the right to access the socket options.
Q: How to check the device information?
A: Press menu option at the top right corner of the device control panel then ‘Settings’ and ‘device
information’
Q: How many timers can be setup at the same time?
A: 20
Q: Once my Wifi Smart Socket is setup on my local network, can I/other users access it via the app from
remote locations?
A: Yes. You or the other users simply need to download the same App and input the Device Information (Serial
number) and password. Then you can use the Wifi Smart Socket in the same way.
A good place to start is to
rename your device such as
“Kitch
en
” or
“Garage
” etc.
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and
workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with
accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to
your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law
in relation to the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a refund, repair or
exchange (where possible) for this product if it becomes defective within the warranty period. This warranty
will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear,
neglect or improper storage.
Please retain your receipt as proof of purchase.
How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified,
your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of
the Laser Product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and refund or replace the
product as per their store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser. Customer Service with
details of your defective Laser Product: Phone: (02) 9870 3388; or Email: service@laserco.com.au or online
www.laserco.net/support/warranty (click on “Consumers (End Users)”). Our business address is at 1/6-8
Byfield Street, North Ryde, NSW 2113
Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send
us the defective Product and a copy of your receipt. Laser will cover the cost of the return delivery.
Step 4: Wait for us to contact you. Once we have received your defective Laser Product for inspection, we
will inform you of our assessment of your claim within 7 days. When we contact you, we will firstly let you
know whether you have a valid claim under this Warranty, and if so, we will inform you whether your defective
Laser Product will be replaced or repaired, together with the number of days you can expect to wait to receive
your replaced or repaired Laser Product.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Loading...