Lascar EL-WiFi-DTC, EL-WiFi-TC, EL-WiFi-TH, EL-WiFi-TP, EL-WiFi-VAC Quick Start Guide

Quick Start Guide

EL-WiFi

Cloud - based Monitoring with EasyLog Cloud

EasyLog Cloud harnesses the power of IoT to automate data logging and alert

notications, giving you the ability to monitor and manage multiple data logging

devices in different locations completely remotely. The system easily scales to
meet your needs. Perfect for compact systems with just a few measuring points, or

corporate solutions with thousands of devices around the globe.

• View data from multiple sensors

• Assign access to multiple users

• View, analyse and export data

• Set up email alerts providing
alarm and status reports

• Broadcast daily summary emails

3 easy steps to get started with your EasyLog WiFi sensor

1. Charge your sensor

Your sensor will arrive partly charged, but for

optimum performance you should charge it for 24

hours before use. The sensor will automatically

start to recharge when connected to a PC or USB

charger using the USB cable provided.

Battery states

The Symbols below show the range of battery states

that your device may display.

Battery OK/Charged Battery Low Battery Charging

Solid with

bars

Symbol
ashes

Bars
cycling

2. Set up your sensor

Option 1 - Set up using the EasyLog Cloud App*

• Sign up for an EasyLog Cloud account at www.easylogcloud.com.

• Install the EasyLog Cloud App from the App Store or Google Play.

• Run the App and sign in to your EasyLog Cloud account.

• Select , followed by Set Up Device, and then WiFi Sensor.

• Follow the in-app instructions to connect your sensor.

• Once connected, you can use the App and EasyLog Cloud to view your data and
update sensor settings.

* Only applicable to V5 rmware and upwards.

Option 2 - Set up using the PC software

• Download the latest WiFi PC Software from the Downloads section at
easylogcloud.com/help.

• Install and run the software, accepting any rewall or security warnings.

• Select Set-Up Device and choose one of the following options:

• On The Cloud - for remote access to your device and data. You can sign up for
an EasyLog Cloud account at www.easylogcloud.com.

• On This PC - to store data on your own PC.

• Follow the on-screen instructions to connect your sensor.

Note: The PC software also allows you to apply sensor rmware updates.
We recommend updating to the latest rmware.

3. Position your sensor

When placing your sensors, press the button

three times to reveal signal strength indication
and ensure that the device remains within range
of the network, consider local heat sources and

radio obstructions when positioning your device.
Any physical obstructions between the router/

access point and sensor will affect the signal

range. In this case WiFi extenders can be used

to increase the range of your network.

Signal states

The Symbols below show the range of

signal states that your device can display.

Signal icon not displayed Signal icon ashes Signal icon solid

Sensor is not
set-up

Sensor is trying to
communicate

Sensor has
successfully
communicated

Technical Support

You can view FAQs, Video Tutorials, Help Guides and other support resources at
www.easylogcloud.com.

21cfr.wisensorcloud.com

Lascar Electronics UK

Telephone: [phone]
Email: [e-mail]

Lascar Electronics US

Telephone: [phone]
Email: [e-mail]

Lascar Electronics HK

Telephone: [phone]
Email: [e-mail]

Important safety information

WARNING: Failure to follow these safety instructions could result in re, electrical shock, other injury or damage.

Batteries

The rechargeable battery should only be replaced
by the manufacturer. All internal components are
non-serviceable. Contact us for details of our battery

replacement service.

Repairing or modifying

Never attempt to repair or modify Lascar’s products.
Dismantling Lascar’s products, including the removal
of external screws, may cause damage that is not
covered under the warranty. Servicing should only

be provided by the manufacturer. If the Lascar
product has been submerged in water, punctured, or

seriously damaged do not use it and return it to the
manufacturer.

Charging

Only use a USB Power Adaptor or a USB port to charge
Lascar products. Read all safety instructions for any

third party products and accessories before use with
this product. We are not responsible for the operation

of any third party accessories or their compliance
with safety and regulatory standards. We do not

recommend charging the battery when the unit is at

40˚C (104˚F) or above. Some of our products employ

safety features to prevent this.

Using connectors and ports

Never force a connector into a port; check for

obstruction in the port, make sure that the connector

matches the port and that you have positioned the
connector correctly in relation to the port. If the

connector and port do not join with reasonable ease
they probably do not match and should not be used.

Disposal and recycling

You must dispose of Lascar’s products according to
relevant laws and regulations. Lascar’s products contain

electronic components and lithium polymer batteries
and therefore they must be disposed of separately from

household waste.

Issue 4 01-2019
www.easylogcloud.com