EasyLog 21CFR
Quick Start Guide
Test Equipment Depot - 800.517.8431
Washington Street, Melrose, MA 02176
99
TestEquipmentDepot.com
DOWNLOAD & INSTALL EasyLog 21CFR SOFTWARE
Windows 7, 8 & 10 (32 & 64bit)
EasyLog 21CFR Windows Control Soware
EasyLog 21CFR is the soware plaorm for Lascar’s 21 CFR compliant
range of data loggers
Double click on the downloaded EasyLog 21CFR Installer.exe le, and
follow the on screen prompts.
FIRST TIME SETUP
.
Double click on the EasyLog 21CFR icon on your desktop.
1
Administrator Setup
.
You will need to create an Administrator for the software by lling in the
required information in the setup wizard. Make sure you keep a note of
your login details!
2 Email Settings 3 Software Settings
.
You may need to ask your IT support or email service provider for the
required details. More information can be found in the software’s helple.
If you aren’t sure of the details, you can skip this step and come back
to it later.
.
These are global settings that apply to all users of the software, some of
which are required as part of the 21CFR standard.
4 Create Additional Users
REPLACING YOUR DATA LOGGER’S BATTERY
Your data logger is provided with a 3.6V 1/2AA battery already installed. You
can change the battery by following the instructions below.
.
Additional users can then be set up from the Admin menu if required. New
users will be asked to create a password when they rst log in.
You are now ready to start data logging with EasyLog 21CFR
For more information on how to use EasyLog 21CFR, please see the help
le in the software. This can be found by clicking ‘Help’ > ‘Help Topics’.
1 2
3 4
STARTING YOUR DATA LOGGER
Click on the ‘Set up and start the
USB data logger’ button.
Set restrictions for stopping the
logging session.
Name your logger and select the
logging rate.
Select when you would like the
logging session to start.
Select how the LCD should function,
and what happens when your logger
is full.
Your logger is now ready for use.
Remove from the USB port.
Set high and low alarms if required.
IMPORTANT SAFETY INFORMATION
Issue 2_07--16
Repairing or Modifying
Never attempt to repair or modify Lascar products. Dismantling them, other than for the purpose of changing replaceable batteries,
may cause damage that is not covered under the warranty. Servicing should only be provided by an authorized supplier.
Disposal and Recycling Information
You must dispose of Lascar products in accordance with relevant laws and regulations. They contain electronic components and
lithium batteries and therefore must be disposed of separately from household waste.
Test Equipment Depot - 800.517.8431
Washington Street, Melrose, MA 02176
99
TestEquipmentDepot.com
Loading...