Lang Manufacturing R12-ATGM User Manual
LANG MANUFACTURING - A DIVISION OF STAR MANUFACTURING INT’L, INC. • 10 SUNNEN DR. ST. LOUIS, MO 63143
TOLL FREE: 800.264-7827 • FAX: 314-781-3636 • www.langworld.com
Item No.
Project
Quantity
12” Add-A-Section For 36” Marine Ranges Model: R12-AT _ M
MARINE CONSTRUCTION FEATURES
• One piece heavy duty 430 Series stainless steel exterior, with attractive
No. 4 finish
• 2-3/4” wide front grease trough
• Grease drain in trough with spillage drawer
• 3-1/4” wide plate landing
• Sea rails and front mounted grab bar
• Griddle top configuration includes one piece welded splash guard
back & sides
• 6” adjustable legs w/ bolt-down flange standard
PERFORMANCE FEATURES
• Unit expands productivity of 36” Marine Range
• Hatchable 12” module allows movement through 26” X 66”
watertight hatch
• Choice of cook top configurations, to include:
❏ 1 ea. 12” wide Hot Top
❏ 1 ea. 12” wide Hot Top Griddle
❏ 2 ea. 8” diameter French Plates
• Full front grease trough, grease drain & spillage drawer speed cleanup
• Full front landing simplifies and speeds plating
CONTROLS
[Varies By Top Configuration]
❏ [-ATGM] One 850˚F thermostat for Hot Top
❏ [-ATJM) One 450˚F thermostat for Griddle
❏ [-ATHM] Two 6-heat switches for French Plate
MARINE SHORT/BID SPECIFICATION
Adder Range Section shall be a LANG Manufacturing Marine
Model R12-___ [Specify one]:
❏ -ATGM, with 1 ea. 12” X 24” X 3/4” thick Hot Plate;
❏ -ATJM, with 1 ea. 12” X 24” X 1/2” thick Griddle; or
❏ -ATHM, with 2 ea. 8” diameter French Plates
…a 12” wide heavy-duty electric heated unit designed to match
36” wide electric Lang Marine Range models; with 5-kW power
input; all stainless steel exterior; individual cook-top component
controls; Sea rails and stainless steel front grab bar.
MARINE PRODUCT WARRANTY
One year, parts & labor (Labor in U.S. only)
Sheet No. LMSP-R6 (rev. 07/07)
Model R12-ATAM shown
MarineSeries
Model Has: R12-ATGM R12-ATJM R12-ATHM
French Plates: - - 2 each
Griddle: - 12” wide -
Hot Plates: 1 each - -
Pictogram:
[Unit Top View]
CONFIGURATION GUIDE*
* See other side for additional spreader options.
LANG MANUFACTURING - A DIVISION OF STAR MANUFACTURING INT’L, INC. • 10 SUNNEN DR. ST. LOUIS, MO 63143
TOLL FREE: 800.264-7827 • FAX: 314-781-3636 • www.langworld.com
© 2004 Lang Manufacturing Company Printed in U.S.A. 10/04-M-12793
Due to continuous improvements, specifications subject to change without notice.
MARINE OPTIONS & ACCESSORIES
❏ Substitute 1” thick griddle plate for grooving [12” wide]
❏ Grooving on [1” thick ONLY] that Griddle Plate
❏ 6” wide Top Spreader to bank with 36” Marine Ranges
❏ 12” wide Top Spreader to bank with 36” Marine Ranges
❏ 6” wide Front Enclosure, for use with 6” Top Spreader
❏ 12” wide Front Enclosure, for use with 12” Top Spreader
❏ Stainless steel curb mounting flange [Order in place of legs]
MARINE INSTALLATION REQUIREMENTS
• E Single 208V or 240V, 1-Phase; or standard 440V/480V,
1-phase electrical connection
• Consult marine codes for installation requirements
[Power connection from bottom. See below]
Sheet No. LMSP-R6 (rev. 07/07)
[Front View/Elevation] [Right Side View] [R12-ATGM shown in Top View/Plan]
12” Add-A-Section For 36” Marine Ranges Model: R12-AT _ M
Model
Height x Width x Depth Clearance from
Weight
Freight
(With standard legs) combustible surface
Actual Shipping
Class
R12-ATGM 125 lbs. 175 lbs.
R12-ATJM 41.7” x 12.0” x 40.6” Sides: 4” (100mm) 57 kg 80 kg
85
R12-ATHM
1058mm x 305mm x 1030mm Back: 4” (100mm) 85 lbs. 135 lbs.
39 kg 61 kg
Model Volts AC - Hz Total kW Amps - Three Phase Amps - Single Phase
208 - 50/60 5.2 N/A 25.0
R12-ATHM
240 - 50/60 5.2 N/A 21.7
440 - 50/60 4.4 N/A 9.9
480 - 50/60 5.0 N/A 10.8
208 - 50/60 5.0 N/A 24.0
R12-ATJM
240 - 50/60 5.0 N/A 20.8
440 - 50/60 4.2 N/A 9.6
480 - 50/60 5.0 N/A 10.8
Loading...