Lang Manufacturing R12-ATG Parts List

Installation, Operation, Maintenance, &

Troubleshooting

Model: R12-ATG & R12-ATH

Add-A-Section Commercial & Marine

Star Manufacturing International 10 Sunnen Drive St. Louis, MO.63143-3800
Part Number: 2M-W821 Ph: 314-781-2777 Fax: [phone]

Rev A

WWW.STAR-MFG.COM August 9, 2007

THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.
READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY
OTHER APPLIANCE.

POST IN A PROMINENT LOCATION

INSTRUCTIONS TO BE FOLLOWED IN THE EVENT USER
SMELLS GAS. THIS INFORMATION SHALL BE OBTAINED BY
CONSULTING YOUR LOCAL GAS SUPPLIER. AS A MINIMUM,
TURN OFF THE GAS AND CALL YOUR GAS COMPANY AND
YOUR AUTHORIZED SERVICE AGENT. EVACUATE ALL
PERSONNEL FROM THE AREA.

WARNING: IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE
PROPERTY DAMAGE, INJURY OR DEATH. READ THE
INSTALLATION, OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR
SERVICING THIS EQUIPMENT.

Model #: Purchased From:

Serial #: Location:
Date Purchased: Date Installed:
Purchase Order #: For Service, Call:

2

Table of Contents

CHAPTER PAGE

Table Of Contents ....................................................................................................... 3

Read First.................................................................................................................... 4

Equipment Description................................................................................................ 6

Unpacking ................................................................................................................... 7

Installation ................................................................................................................... 8

Initial Start-Up .............................................................................................................9

Operation .................................................................................................................... 10

Cleaning & Maintenance Procedures ........................................................................11

Troubleshooting ..........................................................................................................12

Parts Lists ................................................................................................................... 13

Wiring Diagrams.......................................................................................................... 14

3

CAUTION

THE UNIT WEIGHS 160 LBS. (72.5 KILOGRAMS). FOR SAFE HANDLING,
INSTALLER SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY
APPROPRIATE MATERIALS HANDLING EQUIPMENT (SUCH AS A
FORKLIFT, DOLLY, OR PALLET JACK) TO REMOVE THE UNIT FROM
THE SKID AND MOVE IT TO THE PLACE OF INSTALLATION.

ANY STAND, COUNTER OR OTHER DEVICE ON WHICH UNIT WILL BE
LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE
UNIT (160 LBS.).

SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK
WHEN CUT.

DANGER
THIS APPLIANCE MUST BE GROUNDED AT THE TERMINAL PROVIDED.
FAILURE TO GROUND THE APPLIANCE COULD RESULT IN
ELECTROCUTION AND DEATH.

WARNING: INSTALLATION OF THE UNIT MUST BE DONE BY

PERSONNEL QUALIFIED TO WORK WITH ELECTRICITY. IMPROPER
INSTALLATION CAN CAUSE INJURY TO PERSONNEL AND/OR
DAMAGE TO EQUIPMENT. UNIT MUST BE INSTALLED IN
ACCORDANCE WITH ALL APPLICABLE CODES.

NOTICE

The data plate is located right behind removable front panel. The unit's
voltage, wattage, serial number, wire size, and clearance specifications
are on the data plate. This information should be carefully read and
understood before proceeding with the installation.

: The installation of any components such as a vent

hood, grease extractors, fire extinguisher systems, must conform to
their applicable National, State and locally recognized installation
standards.

During the first few hours of operation, you may notice a small amount
of smoke coming off the unit, and a faint odor from the smoke. This is
normal for a new unit and will disappear after the first few hours of use.

CAUTION: ALWAYS KEEP THE AREA NEAR THE APPLIANCE FREE

FROM COMBUSTIBLE MATERIALS.
KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN AND DRY. IF SPILLS
OCCUR, CLEAN IMMEDIATELY, TO AVOID THE DANGER OF SLIPS OR
FALLS.

4

WARNING

KEEP WATER AND SOLUTIONS OUT OF CONTROLS. NEVER SPRAY OR
HOSE CONTROL CONSOLE, ELECTRICAL CONNECTIONS, ETC.

CAUTION

MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS
MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN TO
WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND PROTECTIVE
CLOTHING. CAREFULLY READ THE WARNING AND FOLLOW THE
DIRECTIONS ON THE LABEL OF THE CLEANER TO BE USED.

NOTICE

Service on this or any other Lang appliance must be performed by
qualified personnel only. Consult your Lang Authorized Service Agent
Directory. You can call our toll free number 1-800-807-9054 or visit our
website

WWW.STAR-MFG.COM for the service agent nearest you.

WARNING

BOTH HIGH AND LOW VOLTAGES ARE PRESENT INSIDE THIS
APPLIANCE WHEN THE UNIT IS PLUGGED/WIRED INTO A LIVE
RECEPTACLE. BEFORE REPLACING ANY PARTS, DISCONNECT THE
UNIT FROM THE ELECTRIC POWER SUPPLY.

CAUTION

USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY
LANG OR THEIR AUTHORIZED DISTRIBUTORS CAN CAUSE BODILY
INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT AND
WILL VOID ALL WARRANTIES.

5