Lang Manufacturing PF-H-1 Installation Manual

Installation

Operation

Maintenance

PF-H-1

HALF SIZE PROOFER

Lang Manufacturing Company 6500 Merrill Creek Parkway Everett, WA 98203
Part Number 1-800-224-5264

TABLE OF CONTENTS

TABLE OF CONTENTS....................................................................................................................................2

INSTALLATION................................................................................................................... .............................3

RECEIVING THE APPLIANCE .........................................................................................................................3

DATA PLATE INFORMATION.........................................................................................................................3

ELECTRICAL CONNECTION...........................................................................................................................4

OPERATION......................................................................................................................................................5

CONTROLS .........................................................................................................................................................5

STARTUP.............................................................................................................................................................5

PROOFING GENERAL.......................................................................................................................................5

PROOFING SPECIFICS......................................................................................................................................6

HOLDING CABINET..........................................................................................................................................6

MAINTENANCE ................................................................................................................................................7

CLEANING..........................................................................................................................................................7

PARTS LIST.......................................................................................................................................................8

WIRING DIAGRAM........................................................................................................................................10

WARRANTY ....................................................................................................................................................11

Lang Manufacturing Company 6500 Merrill Creek Parkway Everett, WA 98203
Part Number 1-800-224-5264

INSTALLATION

RECEIVING THE APPLIANCE

Upon receipt of the appliance, check for freight damage both visible and concealed. Visible damage should be
noted on the freight bill at the time of delivery and signed by the carrier's agent. Concealed loss or damage
means loss or damage which does not become apparent until the merchandise has been unpacked. If concealed
loss or damage is discovered, make a written request for inspection by the carrier's agent within 15 days of
delivery. All packing material should be kept for inspection.

Manufacturing Company.

Uncrate the appliance as near its intended location as practical. The crating will help protect the unit from the
physical damage normall y associated with moving it through hallways and doorways.

File your claim with the carrier.

DATA PLATE INFORMATION

A data plate is located on the right side, lower front corner.
The voltage, wattage, serial number, wire size and clearance specifications are on the data plate.
This information should be carefully read and understood before proceeding with the installation.

Do not return damaged merchandise to Lang

3

ELECTRICAL CONNECTION

WARNING

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS EQUIPPED WITH A 3-PRONG (GROUNDING) PLUG FOR YOUR PROTECTION AGAINST SHOCK

HAZARD AND MUST BE PLUGGED DIRECTLY INTO A PROPERLY GROUNDED 3-PRONG RECEPTACLE.

DO NOT CUT OR REMOVE THIS GROUNDING PRONG FROM THE PLUG.

120 Volt Models:

The electrical connection must be made in accordance with local codes or in the absence of local codes with
NFPA No. 70 latest edition (in Canada use: CAS STD. C22.1).
The electrical service entrance is provided by a cord and plug.
Each appliance requires a 120 volt grounded supply and 16.7 amps.
Supply wire size must be 14 gauge or larger to carry the load for one proofer.
The plug type is NEMA S-20P, match the plug to the corresponding NEMA S-20R for the receptacle
(receptacle not supplied).

240 Volt Models:

The electrical connection must be made in accordance with local codes or in the absence of local codes with
NFPA No. 70 latest edition (in Canada use: CAS STD. C22.1).
The electrical service entrance is provided by a cord and plug.
Each appliance requires a 240/208 volt grounded supply and 16.7 amps.
Supply wire size must be 14 gauge or larger to carry the load for one proofer.
The plug type is NEMA #6-15P, match the plug to the corresponding NEMA #6-15R for the receptacle
(receptacle not supplied).

VOLTAGE AMPERAGE WATTAGE

120 13.0 1550
240 6.5 1550

4