Lang Manufacturing PF-F-1-LMDR Installation Manual

THERMOMETER INSTALLATION KIT

MODEL PF-F-1-LMDR PROOFER

Part Number 51100-49

De-energize the Proofer.
Remove all trays from right side of proofer.
Remove the rack along the right inside wall of proofer cavity.
Locate and drill two (2) holes per the below illustration. Use a 0.136 diameter drill bit.
Using (2) two # 8 self-tapping stainless screws, install the small mounting bracket

provided.
Install the rack on the right side of the proofer,
Install the Thermometer, by sliding bottom assembly tab into the mounting bracket.
Installation is complete.

Proofer Top

Right Side Wall

Top of Proofer Cavity

18 1/4 in.

19 11/16 in.

Proofer

Front

9 3/4 in.

10 3/8 in.

Proofer Door Edge

All Dimensions are internal

Star Manufacturing International 10 Sunnen Drive St. Louis, MO 63143
Part Number: 2M-W817 Phone: [phone] Fax: [phone] December 1, 2006
Rev. WWW.STAR-MFG.COM