Page 1
TIMER ELECTRIC 1-HR 24V SERVICE KIT
Instructions for Service Kit Q9-30800-05-1
Models: ECCO, EH, & GCCO
Star Manufacturing International 10 Sunnen Drive St. Louis, MO 63143
P/N: 2M-W748 Phone: 1-800-807-9054, Fax 314-781-2714
Rev. - March 2007
Page 2
Table Of Contents
CHAPTER PAGE
TABLE OF CONTENTS.............................................................................. 2
KIT PARTS LIST......................................................................................... 3
TIMER WIRING DETAIL............................................................................. 4
MODEL ECCO INSTALL DETAILS............................................................ 5
MODEL EH INSTALL DETAILS ................................................................. 6
MODEL GCCO INSTALL DETAILS ........................................................... 7
Rev. A 2005
2
Page 3
Kit Parts List
Q9-30800-05-1
TIMER ELECTRIC 1-HR 24V SERVICE KIT
OTY DESCRIPTION PART NO.
1 TIMER ELECTRIC 1-HOUR 24VAC Q9-30800-05-11
1 ECCO RETRO TIMER BRACKET Q9-50309-080
1 EH RETRO TIMER BRACKET Q9-50309-081
1 GCCO RETRO TIMER BRACKET Q9-50309-082
2 SCRW ST PLT 8-32 X .5 PHD 2C-20102-04
3 SPACER SUPPORT 1/2LG NYLON 2K-70801-07
Rev. A 2005
3
Page 4
Timer Wiring Detail
BLACK / WHITE WIRE TO
BUZZER BOARD
(FROM WIRE HARNESS)
JUMPER
9Q-30800-05-11
YELLOW / WHITE WIRE, TO TERM
STRIP
(FROM WIRE HARNESS)
BLACK WIRE,
WIRE NUT
TO GROUND
Rev. A 2005
4
Page 5
ECCO Install Details
ECCO ACCU PLUS
1. REMOVE OLD TIMER.
2. ATTACH SUPPLIED 70801-07 SPACERS TO
50309-080 BRACKET AS SHOWN.
3. REMOVE CIRCUIT BOARD, LEAVING
EXISTING 70801-07 SPACERS ATTACHED
TO UNIT.
4. ATTACH CIRCUIT BOARD TO BRACKETSPACERS AS SHOWN.
5. INSTALL NEW 30800-05-11 TIMER.
6. ATTACH BRACKET AND BOARD TO
ORIGINAL SPACERS IN UNIT.
ECCO ACCU TEMP
1. REMOVE OLD TIMER.
2. INSTALL NEW 30800-05-11 TIMER.
MODEL: ECCO ACCU PLUS (SHOWN)
MODEL: ECCO ACCU TEMP (NOT SHOWN)
SEE INSTALL NOTES
KIT INSTALLATION COMPLETE
MODEL: ECCO ACCU PLUS (SHOWN)
MODEL: ECCO ACCU TEMP (NOT SHOWN)
SEE ABOVE INSTALL NOTES
Rev. A 2005
5
Page 6
Install Details
MODEL: EH ACCU PLUS
1. REMOVE OLD TIMER.
2. ATTACH SUPPLIED 70801-07 SPACERS TO
50309-081 BRACKET AS SHOWN.
3. REMOVE CIRCUIT BOARD AND ORIGINAL
SPACERS (DISCARD ORIGINAL SPACERS).
4. ATTACH CIRCUIT BOARD TO BRACKETSPACERS AS SHOWN.
5. REMOVE CONTACTOR FROM UNIT AND
ATTACH TO BRACKET AS SHOWN.
6. INSTALL NEW 30800-05-11 TIMER.
7. ATTACH BRACKET ASSY TO UNIT WITH
20102-04, USING THE ORIGINAL
CONTACTOR MOUNTING LOCATION.
KIT INSTALLATION COMPLETE
MODEL: EH ACCU PLUS
Rev. A 2005
6
Page 7
MODEL: GCCO ACCU PLUS (SHOWN)
MODEL: GCCO ACCU TEMP (NOT SHOWN)
SEE INSTALL NOTES
GCCO Install Details
GCCO ACCU PLUS
1 REMOVE OLD TIMER.
2 ATTACH SUPPLIED 70801-07 SPACERS TO
50309-082 BRACKET AS SHOWN.
3 REMOVE CIRCUIT BOARD AND ORIGINAL
SPACERS (DISCARD ORIGINAL SPACERS).
4 ATTACH CIRCUIT BOARD TO BRACKET-
SPACERS AS SHOWN.
5 REMOVE CONTACTOR FROM UNIT AND
ATTACH TO BRACKET AS SHOWN.
6 REMOVE BUZZER BOARD & BUZZER
BOARD BRACKET FROM UNIT AND ATTACH
TO BRACKET AS SHOWN.
7 INSTALL NEW 30800-05-11 TIMER.
8 ATTACH BRACKET ASSY TO UNIT WITH
20102-04, USING THE ORIGINAL
CONTACTOR MOUNTING LOCATION.
GCCO ACCU TEMP
1. FOLLOW STEPS 1, 5, 6, 7, 8.
KIT INSTALLATION COMPLETE
MODEL: GCCO ACCU PLUS (SHOWN)
MODEL: GCCO ACCU TEMP (NOT SHOWN)
SEE INSTALL NOTES
Rev. A 2005
7
Loading...