Page 1
GUITAR AMPLIFIER
Page 2
WELCOME
Page 3
INTRODUCTION
The ultra compact LX10, brings the renowned big tones of the LX range to a compact portable guitar
amp.
The 10-Watt LX10 is capable of producing some great tones. Housing a big sounding 5” driver and 2
band EQ the LX10 produces a nice open clean sound and hitting the on board DRIVE switch allows
you to kick in some serious, great sounding distortion.
Plugging in some headphones means you can play
whenever you like, whatever time of the day or night and
if you connect an external device to the AUX IN socket
you can jam along with your favourite players!
Finished in the same décor as the bigger LX models the
LX10 is a great addition to the LX range.
All the features & controls are covered over the next few
pages, please take the time to read this manual fully as it
will allow you to get the very best from your amplifier,
read on, play and enjoy…
Page 4
FRONT PANEL CONTROLS
VOLUME BASS
5
4 6
3
2
1
10
0
2
7
8
3
4
9
DRIVEINPUT
0
-
+
1 1
5
EQUALISATION
TREBLE
0
-
+
1 1
2
2
3
3
4
4
5
5
2
3
4
5
GUITAR AMPLIFIER
AUX IN
1
0
POWER
Input: This socket should be used for connecting your instrument to the amplifier. Only use a good
quality screened cable.
Volume: Sets the overall listening level of the amplifier.
Drive: Switch in to activate drive channel, adjust the volume to suit, and get some serious distortion!
EQ Controls: Traditional Bass & Treble passive tone controls. Passive controls have the advantage of
always sounding musical at any of their settings, due to their unique interactive nature. This gives the player
a more natural set of tools to shape their ideal sound. Set these midway at (0) as a good starting point.
Aux In: A 3.5mm Stereo line input for connection of a CD or MP3 player as a backing track. Control the
level of the input using the volume control on your CD/MP3 player.
Phones: 3.5mm stereo jack socket for connecting headphones and when connected, the internal
loudspeaker is automatically switched off.
Power LED: This will illuminate when the power switch is operated, indicating the presence of mains
power within the amplifier.
Power Switch: Mains power switch for the unit.
4
Page 5
L ZB 1 2 3 4
REAR PANEL
Information area relating to the
amplifier: Supply Voltage, Model,
Serial Number, etc.
A built in mains lead is provided
to connect to your power
source. Make sure the specified
voltage is correct for your
country!
(ALWAYS SWITCH OFF AND DISCONNECT THE POWER CORD WHEN NOT IN USE)
SUPPLY VOLTAGE:
~100V
~120V
~220V/~230V/~240V
MODEL:
LX10
SERIAL NUMBER:
DESIGNED IN THE UK BY LANEY
MADE IN CHINA. FABRIQUE EN CHINE.
CAUTION: TO REDUCE THE RISK OF FIRE REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: POUR RÉDUIRE LE RISQUE DU FEU REMPLACEZ AVEC LE MÊMES TYPE ET ESTIMATION.
WARNING: THIS APPARATUS MUST BE EARTHED.
AVERTISSEMENT: CET APPAREIL DOIT ÊTRE MIS À LA TERRE
LAITE ON LIITETTÄVÄ SUOJAMAADOITUSKOSKETTIMILLA VARUSTETTUUN PISTORASIAAN
APPARATET MÅ TILKOPLES JORDET STIKKONTAKT
APPARATEN SKALL ANSLUTAS TILL JORDAT UTTAG
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO
NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
AVERTISSEMENT: POUR RÉDUIRE LE RISQUE DU FEU OU DE DÉCHARGE ÉLECTRIQUE N'EXPOSEZ PAS CET APPAREIL À LA PLUIE
OU A L’HUMIDITÉ . NE PAS ENLEVER LA COUVERTURE. EN CAS DE PROBLEME RÉFÉREZ A UN PROFFESSIONEL.
MAXIMUM POWER CONSUMPTION
15 WATTS 50/60Hz
www.laney.co.uk
CAUTION - RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION - RISQUE DE DÉCHARGE ÉLECTRIQUE, NE S'OUVRE PAS
N15039
5
Page 6
CONNECTIONS
Options
Guitar
CD/MP3
Headphones
General Notes
Amplifier connection: In order to avoid damage, it is advisable to establish and follow a pattern
for turning on and off your equipment. With all system parts connected, turn on source equipment,
MP3/CD players, etc. BEFORE turning on your guitar amplifier. Similarly when turning off your
system always turn down the Volume controls on your guitar amplifier and then turn off its power
before turning off other equipment.
Cables:
Only use a good quality screened cable to connect your instrument to the amplifier.
Servicing: The user should not attempt to service these products. Refer all servicing to qualified
service personnel.
6
Page 7
SPECIFICATIONS
This product conforms to the requirements of the
following European Regulations, Directives & Rules:
CE Mark (93/68/EEC),
Low Voltage (72/23/EEC),
EMC (2004/108/EEC),
RoHS (2011/65/EU),
WEEE (EU2002/96/EC).
In order to reduce environmental damage, at the
end of its useful life, this product must not be
disposed off along with normal household waste to
landfill sites. It must be taken to an
approved recycling centre according
to the recommendations of the
WEEE (Waste Electrical And
Electronic Equipment) Directive
applicable in your country.
In the interest of continued development, Laney
reserves the right to amend product specification
without prior notification.
Supply Voltage (Factory Preset) ~100V, ~120V, (~220V, > ~240V) 50/60Hz
Power Consumption 15W
Output Power Rating 10W
Loudspeaker 5” Custom Designed Driver
Features Input Skt (6.3 Jack)
Drive Switch
Bass
Treble
Aux In (3.5 Stereo Jack)
Headphone Skt (3.5 Stereo Jack)
Master Volume
Size 245*216*146 (H*W*D)
Unit Weight 2.6Kg
Packing Weight 3.2Kg
BLOCK DIAGRAM
INTERNAL
LOUDSPEAKER
GUITAR INPUT
AUX IN
ON/OFF
DISTORTION
BASS
SECTION
TREBLE
MASTER VOLUME
EQ
HEADPHONES
7
Page 8
Loading...