Laney BH250 Owner's Manual

Laney

BC SERIES

USER MANUAL

MODEL : BC250MODEL : BC250

1

Laney

INTRODUCTION

Congratulations on your decision to purchase a Laney amplifier.

Laney products are designed with ease of operation as a primary objective, however to ensure you derive the best from your

new amplifier, it is important you take time to read this user manual and to familiarise yourself with the control functions and
facilities available

BEFORE
SWITCHING ON

After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before plugging into
the power supply ensure you are connecting to a grounded earth outlet.

If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to the country where
the amplifier is to be used is strictly conformed to. As an example in the United Kingdom the cable colour code for
connections are as follows.

EARTH OR GROUND - GREEN/YELLOW
NEUTRAL - BLUE
LIVE - BROWN

This manual has been written for easy access of information. The front and rear panels of each unit are graphically illustrated,
with each control and feature numbered. For a description of the function of each control feature, simply check the number
with the explanations adjacent to each panel.

When you first recieve your Laney amp, follow these simple procedures:

(i) Ensure that the amplifier is set at the correct voltage for the country it is to be used in.

(ii) Connect your instrument with a high quality sheilded instrument cable. Use of cheap cables will compromise the sound of
your instrument and your amplifier.

If there is a problem with your Laney amplifier

DON'T

DO

PHONE YOUR DEALER!

Care of your Laney amplifier will prolong it's life.....and yours!. If you follow these guidelines your equipment will give you

years of playing pleasure

220V