Laney AH4X4 User Manual
AH4X4 USER MANUAL
2
Dear Player,
Thank you very much for purchasing your new Laney product and becoming part of the worldwide Laney
family. Each and every Laney unit is designed and built with the utmost attention to care and detail, so I
trust yours will give you many years of enjoyment.
Laney products have a heritage which stretches back to 1967 when I first began building valve amplifiers in
my parent’s garage.
Since then we have moved on from strength to strength developing an extensive range of guitar, bass,
public address, multi instrument and keyboard amplification products along with a list of Laney endorsees
that includes some of the world’s most famous and respected musicians.
At the same time we believe we have not lost sight of the reason Laney was founded in the first place - a
dedication to building great sounding amplification for working musicians.
Warm Regards,
Lyndon Laney
Chairman & Founder
Welcome
Introduction
3
The Audiohub range of multi instrument amplifiers is designed to
be the center of your audio world.
The portable, mains or battery powered AH4X4 with its stylish
and lightweight aluminum chassis the ideal solution for your
street busking, open air gigs, parties, background music, talking
presentations/aerobics/shops/bars or bedroom practice
requirements.
Featuring six independent channels, the AH4X4 allows you to
connect sources from either balanced XLR's, line and high
impedance/instruments, as well as a dedicated Aux In, PLUS a
Bluetooth source.®
Each of the AH4X4's XLR equipped channels; feature assignable
FX, consisting of a Reverb/Delay effect with adjustable Time
control.
All channels benefit from advanced (switchable) Feedback
protection helping to keep your performance professional and
feedback free.
The AH4X4 can be run from a wall mounted mains adaptor, which
is supplied as standard, or batteries for anywhere operation. Use
either standard AA batteries or for maximum battery life use
LITHIUM ION batteries for up to 24 hours non-stop operation.
Ideal for keyboards, vocals, electronic drums as well as pre
recorded audio; the Audiohub AH4X4 features custom drivers to
ensure optimum performance whatever sound source you use.
The AH4X4 is the ideal solution for all of your audio performance
needs...wherever you are and whenever you need it.
4
Quick Start
Startup Procedure:
1: Ensure Power switch (e) is off.
2: Connect the power supply connector to the AH4X4 (d) and
plug into a wall power socket.
3: Make sure the Level (b) and Volume control (c) are set to 0.
4: Connect your audio source to any of the available channels,
the Aux input for example using a 3.5mm Mini-jack to mini-jack
audio cable (not included).
5: Set power switch to 1 (e).
6: Increase Level (b) to 5, but make sure adjacent Peak Led
doesn’t light. If it does, reduce Level slightly.
Slowly increase Volume (c) to a safe and comfortable level.
(e)
(d)
(b)
(a)
12V/3A included power supply.
Phone/MP3 player
PAIR
AUX IN
PEAK
ON
LEVEL
5
4
3
2
1
0
10
9
8
7
6
CH5-6
5
Sample setup - Single AH4X4
Vertical: Wide horizontal sound field,
ideal for PA.
35MM
SUB OUT
Phone
Instrument
Mic 1
Keyboard
Laney FS-1
Powered sub-cab
Your AH4X4 can be used vertically,
horizontally, or on a pole stand.
Horizontal: Narrow horizontal sound
field ideal as stage monitor.
Loading...