Land Pride RCRM3515, RCR3515 User Manual

Features and Benefits

Rotary Cutters, Folding Deck

RCR3515 & RCRM3515 Models

Features Benefits

Surpassed rugged
industry standards

Tractor HP rating 50- 160 HP
540 or 1000 RPM Fits wide variety of tractors.
Quality Gearboxes Gearboxes rated at 160 HP splitter box and 110 HP wing box to handle the jobs suited for

Gearbox warranty 5 years Parts and Labor.
4 Gearboxes vs. 3 Spreads overall weight out and evenly disburses horsepower to each spindle.
Mostly factory assembled Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
Low tongue weight Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
Narrow tongue construction Allows for a tighter turning radius.
Round back design Allows for more efficient handling and dispersing of material.
2” to 14” Cutting Height Cover a wide range of cutting conditions.
1/4 ” Sidewall thickness Increased thickness reduces damage from objects being thrown into the deck sides from the

3/16” Round stump jumper Standard thick stump jumper material keeps damage to a minimum.
High Blade tip speed (540 rpm = 15,268 fpm center & 15,000 fpm wings)

Replaceable skid shoes Skid shoes protect the deck in uneven terrain. Can be easily replaced if damaged or worn

CV Input Driveline Cat. 5 driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint

Wing driveline
Cat. 4 with slip-clutch

Slip-clutch drivelines Slip-clutch designed to slip to minimize twist damage to profile of driveline.
Transport wing locks Transport wing locks securely hold the wings in the folded position in case of hydraulic

4 or 6 Wheels Choice of laminated tires for eliminating flats, used aircraft tires for cushioning during field

Spring cushioned center-axle Protects unit from bumps and ground shock.
Paint options Choice of red, green or tan to match popular tractor lines.

All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.

this Rotary Cutter.

blades.

(1,000 rpm = 15,578 fpm center & 14,620 fpm wings)
Allows clean cutting of material.

out.

allows for 80 degree turns without doing damage to the driveline.
Cat. 4 is sized right for what cutter is intended to be used for. Slip-clutch will slip under load

instead of twisting driveline. (Optional Cat. 5 driveline is available.)

failure.

and road use or bare rims for suppling your own automotive tires.

Designs, specifications, features and information are subject to change without notice.

5/22/07 60 318-301F

318-301F