Landmann 28240 Installation Manual

THE HALO FIRE PIT

Model 28240

ASSEMBLY INSTRUCTIONS

FOR SAFE OPERATION, PLEASE READ ALL ASSEMBLY

!

Model 28240

Congratulations on your purchase of the Halo Fire Pit!
At Landmann USA, our goal is to provide products that
are easy to assemble and fun to use. Should you have
questions, issues, a defective part or if you have any
questions concerning its use, please contact us at:
[e-mail]

-OR­1-800-321-3473 M-F 8-5 Eastern Time
Proof of purchase may be required.

Landmann USA
Cartersville, GA 30120
www.landmann-usa.com

Made in China
© 2007 Landmann USA

AND OPERATING INSTRUCTIONS BEFORE USE.

REV. 4, 11/21/07

READ FIRST!

!

RULES FOR SAFE OPERATION

• THIS OUTDOOR FIRE PIT IS FOR
OUTDOOR USE ONLY!

• A LAYER OF SAND, 1 1/2” TO 2” THICK

MUST BE ADDED TO THE BOTTOM OF
THE BOWL TO HELP PROTECT AGAINST
THE CORROSIVE NATURE OF THE ASHES.

• USE ONLY ON BRICK, CONCRETE, STONE
OR OTHER MASONRY SURFACES.

• DO NOT USE ON LAWNS OR WOODEN
DECKS.

• USE NATURAL FIREWOOD BUT NOT OVER
12” LONG IN THIS OUTDOOR FIRE PIT.

• USE LANDMANN EARTH FRIENDLY™
FIREWOOD FOR CLEANER BURNING FIRES
WITHOUT THE CHEMICAL SMELL OTHER
ARTIFICIAL FIREWOOD MAKES.

• DO NOT USE MORE THAN 2 PIECES OF
FIREWOOD AT A TIME.

• KEEP THE OUTDOOR FIRE PIT AWAY
FROM BUILDINGS, FLAMMABLE ITEMS
AND VEHICLES.

• THE OUTDOOR FIRE PIT IS FOR ADULT
USE ONLY.

• DO NOT MOVE THE OUTDOOR FIRE
PIT WHILE IT IS BEING USED.

• DO NOT LEAVE UNATTENDED AT ANY
TIME WHILE IN USE.

• DO NOT USE IN WINDY CONDITIONS.

• DO NOT OVERLOAD OR USE TO BURN
LEAVES OR GARBAGE.

• KEEP THE SPARK SCREEN IN PLACE
WHILE USING.

• USE CAUTION WHEN REMOVING THE
COVER, AS HOT STEAM OR A FLARE UP
COULD CAUSE BURNS.

• BEFORE EACH USE, MAKE SURE THE
OUTDOOR FIRE PIT IS IN GOOD
WORKING CONDITION.

• USE CAUTION AFTER THE FIRE HAS
BEEN EXTINGUISHED- SURFACES WILL
REMAIN HOT FOR SOME TIME.

• BE SURE ALL COALS ARE COLD BEFORE
EMPTYING. IF NECESSARY POUR WATER
ON COALS.

PAGE 1

Parts and Quantities:

PART

DESCRIPTION

A

LEGS

B

FIRE BOWL

C

SPARK GUARD

D

POKER

E

15MM BOLT

F

M6 NUT

G

EYEBOLT

PAGE 2

THE HALO FIRE PIT

Model 28240

QTY

3
1
1
1
6
7
1

Assembly Instructions:

You will need these tools for assembly:
Medium phillips or flathead screw driver, pliers
or small adjustable wrench.

Step 1 Unpack all parts from the carton.
Step 2 Align leg (A) holes with holes in

fire bowl (B) and attach with six
15MM bolts and M6 nuts. Tighten
bolts securely.

Step 3 Attach the eyebolt (G) to the spark

guard (C) with one M6 nut. Tighten

securely.
Step 4 Place the spark guard on the fire bowl.
Step 5 Enjoy!

Maintenance:

The Halo Fire Pit may be cleaned with water and
mild detergent. Periodic maintenance is required
to return painted steel surfaces to original
appearance. Remove any rust with sandpaper or
steel brush. Repaint with grill paint for high
temperature surfaces. Follow paint manufacturerʼs
instructions.

Do not return product to the store. If

you have questions or trouble with

assembly, please contact us at:

1-800-321-3473 or at

[e-mail]

!

DON’T FORGET TO ADD A LAYER OF

SAND, 1 1/2” TO 2” THICK (OR ABOUT

5LBS) TO THE BOTTOM OF THE BOWL

TO HELP PROTECT AGAINST THE

CORROSIVE NATURE OF THE ASHES.