Lancom GS-2310 User Manual

Switches

LANCOM GS-2310P+

Managed 10-port Gigabit Ethernet switch with Power over Ethernet for reliable
networks

The LANCOM GS-2310P+ is a reliable component for smaller modern network infrastructures at small or home

offices. It networks up to 10 devices with its 8 Gigabit Ethernet ports and 2 combo ports (Ethernet or fiber-optic).

This switch supplies an overall output of 130 Watts and is also capable of powering all PoE devices connected

to it (as per IEEE 802.3af/at) without any additional power supply units or cabling. Equipped with numerous

security features and a high-performance hardware platform, it is ideal for the secure and reliable networking

of smaller networks.

a

8 Gigabit Ethernet and 2 combo ports (TP/SFP)

a

PoE support based on IEEE 802.3af/at with 130 W input power for an efficient and central power supply

a

Energy-saving functions as per IEEE 802.3az with port deactivation if no data is transferred

a

Security with configurable access control on all ports as per IEEE 802.1X

a

Secure remote management through TACACS+, SSH, SSL, and SNMPv3

a

Zero-touch deployment

a

IPv6 and IPv4 support for modern enterprise networks

a

5-year warranty on all components

DATASHEET

LANCOM GS-2310P+

High power output on 10 ports

The LANCOM GS-2310P+ is equipped with 8 Gigabit Ethernet

ports and 2 combo ports (Ethernet or fiber-optic). With a

data throughput of 20 Gbps on the backplane, it offers full

performance even under load. This makes the switch a

high-performance basis for modern network infrastructures

in small an home offices.

Centralized power supply without additional cabling

The LANCOM GS-2310P+ is a high-performance PoE switch

that directly powers PoE devices connected to it; there is no

need of additional power supply units or cabling. It supports

the two Power-over-Ethernet standards, IEEE 802.3af and

IEEE 802.3at (PoE+). It has plenty in reserve with an overall

output of 130 Watts, so it efficiently supplies power to

devices with high energy demands.

Efficient power-saving features

Featuring Energy Efficient Ethernet technology, the LANCOM

GS-2310P+ provides optimum energy efficiency even at fast

data rates. Thanks to numerous power-saving features based

on the IEEE 802.3az standard, ports that are not transferring

data are switched off automatically. This valuable feature

saves precious resources.

Zero-touch deployment

Quick and easy network integration of the switch as well as

automatic assignment of the configuration—without manual

configuration. For installations based on the LANCOM

Management Cloud, switch receives the correct configuration

immediately after network authentication.

IPv6 and IPv4 support

Thanks to the dual-stack implementation, the LANCOM

GS-2310P+ operates in pure IPv4, pure IPv6, or in mixed

networks. Applications such as SSL, SSH, Telnet, and TFTP

can continue to be operated on IPv6 networks. Supported

IPv6 features include stateless auto-configuration, the

discovery of neighboring devices, and MLD snooping.

Configurable access control

The LANCOM GS-2310P+ excludes rogue clients from gaining

unauthorized access to the network. This is ensured by

secured access control on all ports as per IEEE 802.1X

(port-based, single, multi, and MAC-based).

Secure remote management

Secure communication protocols such as SSH, SSL, and

SNMPv3 mean that the LANCOM GS-2310P+ is ideal for

professional remote network management. The switch also

supports the TACACS+ protocol for authentication,

authorization, and accounting. This optimized solution

promises maximum security for multi-site network

management and monitoring.

DATASHEET

LANCOM GS-2310P+

Security

SSH for a secure remote configurationSecure Shell Protocol (SSH)

SSL to encrypt HTTP connections; advanced security for browser-based configuration via web interfaceSecure Sockets Layer (SSL)

IEEE 802.1X

Access control lists

Isolated Group

Performance

VLAN

PoE with IEEE 802.3at

Energy efficiency (Green Ethernet)

Energy detection

Layer 2 switching

IGMP multicasts

Spanning Tree Protokoll (STP) / Rapid STP
/ Multiple STP

IEEE 802.1X access control on all ports; RADIUS for authentication, authorization and accounting with MD5 hashing; guest VLAN;
dynamic VLAN assignment

Layer 2 isolation between clients in the same VLAN ('protected ports''); support multiple uplinksPrivate VLAN edge

Locking of MAC addresses to ports; limiting of the number of learned MAC addressesPort security

Blocking access for illegal IP addresses on specific portsIP source guard

Drop or rate limitation of connections based on source and destination MAC addresses, VLAN ID, IP address, protocol, port, DSCP/IP
precedence, TCP/UDP source and destination ports, IEEE 802.1p priority, ICMP packets, IGMP packets, TCP flag

Authentication, authorization and accounting of configuration changes by RADIUS or TACACS+RADIUS/TACACS+

Multicast/Broadcast/Unicast storm suppressionStorm Control

Allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members ist blocked.
Traffic can only be sent from isolated group to non-isolalted group.

Store and forward with latency less than 4 microsecondsSwitching technology

Support of max 8K MAC addressesMAC addresses

Max. 20 Gbps on the backplaneThroughput

14,88 million packets per second (mpps) at 64-byte packetsMaximum packet processing

Supports stacking of up to 16 devices, several switches can be managed via one ip addressSingle IP Management (SIP)

Port based and IEEE 802.1q tag based VLAN with up to 4,096 VLAN and up to 4,000 active VLANs; Supports ingress and egress packet
filter in port based VLAN

Jumbo frame support with up to 9k framesJumbo frame support

8x IEEE 802.3at PoE ports (compatible to IEEE 802.3af powered devices), limited by the maximum PoE power suppliedPorts

130 W total power with dynamic load balancing on all portsPower

Energy efficiency according to IEEE 802.3az. Automatically turns off power on Gigabit Ethernet RJ-45 port when detecting link down
or Idle of client. Active mode is resumed without loss of any packets when the switch detects the link up

Adjusts the signal strength based on the cable length. Reduces the power consumption for short cableCable length detection

Support of 5 groups containing up to 2 ports each according to IEEE 802.3adLink Aggregation Control Protocol (LACP)

Support for up to 4K VLANs simultaneously (out of 4096 VLAN Ids); matching due to port, IEEE 802.1q tagged VLANs or MAC adressesVLAN

Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoSVoice VLAN

IGMP v1, v2, v3 to limit bandwidth-intensive multicast traffic to ports with requesters; supports 256 multicast groups; source-specific
multicasting

Support of multicast domains of snooping switches in the absence of a multicast routerIGMP querier

IGMP proxy to pass IGMP messages throughIGMP proxy

VLAN registration with GVRP according to IEEE 802.1q for automatic delivery of VLANs in bridged domainsGeneric VLAN registration

Standard Spanning Tree according to IEEE 802.1d with fast convergence support of IEEE 802.1w (RSTP); using Multiple Spanning Tree
instances by default according to IEEE 802.1s (MSTP)

DHCP relay agent, supporting DHCP option 82DHCP Relay Agent

DATASHEET

LANCOM GS-2310P+

Interfaces

1

Ethernet

Management and monitoring

Port Mirroring

Command Line Interface (CLI)

Remote Monitoring

Firmware update

8 TP ports 10/100/1000 Mbps

1

2 combo ports (TP/SFP) with 100/1000 Mbps (SFP) and 10/100/1000 Mbps (TP)

1

10 concurrent Ethernet ports in total

RJ45 configuration port for command line accessConsole port

LANconfig, WEBconfig, LANCOM Management CloudManagement

LANmonitor, LANCOM Management CloudMonitoring

Easy setup of ports for QoS and Security based on pre-defined configuration profilesEasy-Configuration-Ports

Traffic can be mirrored from on port to another for investigation with network analyzer or RMON probe. Up to 8 ports can be mirrored
to a single mirror port. Single sessions can be selected

Access rights (read/write) can be set up separately, access control listSecurity

SNMP management via SNMPv1, v2c or v3 with support of traps. User-based security model for SNMPv3 (USM)SNMP

Diagnosis from the switch with PING and cable diagnosisDiagnosis

Configuration and status display from the command line with console application and direct connection to console port, via Telnet or
SSH

Integrated RMON software agent supports 4 RMON groups (history, statistics, alarms and events) for enhanced traffic management,
monitoring and analysis

1

Update via WEBconfig and browser (HTTP/HTTPS)

1

Update via TFTP and LANconfig

1

Dual firmware image to update during operation

s-flow

Hardware

Declarations of conformity*

Supported IEEE standards

Securely import and export filesSecure Copy

Automatic assignement of the management IP address by DHCPDHCP client

Automatic time settings with Simple Network Time Protocol (SNTP)SNTP

Standard for monitoring of high-speed-networks. Visualization of network use, accounting an analysation to protect your network
against dangers

5,18 lbs (2,35 kg)Weight

Internal power supply unit (110–230 V, 50-60 Hz)Power supply

Temperature range 0–40° C; humidity 10–90%; non-condensingEnvironment

Robust metal housing, 19" 1U (220 x 45 x 242 mm > W x H x D) with removable mounting brackets, network connectors on the frontHousing

None; fanless design without rotating parts, high MTBFFans

160 wattPower consumption (max)

EN 60950-1, EN 55022, EN 55024CE

FCC Part 15 (CFR47) Class AFCC

You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu*) Note

Link Layer Discovery Protocol (LLDP)IEEE 802.1AB

LLDP-MEDIEEE 802.1AB

Q-in-Q taggingIEEE 802.1ad

DATASHEET

LANCOM GS-2310P+

Supported IEEE standards

MAC BridgingIEEE 802.1d

Spanning TreeIEEE 802.1d

Class of ServiceIEEE 802.1p

VLANIEEE 802.1q

Multiple Spanning Tree Protocol (MSTP)IEEE 802.1s

Rapid Spanning Tree Protocoll (RSTP)IEEE 802.1w

Port Based Network Access ControlIEEE 802.1X

10Base-T EthernetIEEE 802.3

1000Base-TX EthernetIEEE 802.3ab

Link Aggregation Control Protocol (LACP)IEEE 802.3ad

Power over Ethernet (PoE)IEEE 802.3af

Power over Ethernet Plus (PoE+)IEEE 802.3at

Energy Efficient EthernetIEEE 802.3az

100Base-T EthernetIEEE 802.3u

Flow ControlIEEE 802.3x

1000Base-X EthernetIEEE 802.3z

Supported RFC standards

Telnet Protocol SpecificationRFC 854

MIB IIRFC 1213

SNMP Generic TrapsRFC 1215

Bridge MIBRFC 1493

Simple Network Time Protocol (SNMP)RFC 1769

Remot Network Monitoring MIB v2 (RMONv2)RFC2021

Interface MIBRFC 2233

SMON MIBRFC 2613

HTTP AuthenticationRFC 2617

Ethernet-Like MIBRFC 2665

IEEE 802.1p and IEEE 802.1q Bridge MIBRFC 2674

Hypertext Transfer Protocol Secure (HTTPS)RFC 2818

Remote Network Monitoring MIB (RMON)RFC 2819

Interface Group MIB using SMIv2RFC 2863

IGMP MIBRFC 2933

MLDv1 MIBRFC 3019

User based Security Model for SNMPv3RFC 3414

View based Access Control Model for SNMPRFC 3415

Ethernet-Like MIBRFC 3635

IEEE 802.3 MAU MIBRFC 3636

Entitiy MIBv3RFC 4133

LANCOM GS-2310P+

ConsoleMode/Reset

PoE

Link/Act/Speed

System

DATASHEET

LANCOM GS-2310P+

Supported RFC standards

Bridge MIBRFC 4188

The Secure Shell Protocol Architecture (SSH)RFC 4251

RADIUS Authentication Client MIBRFC 4668

RADIUS Accounting MIBRFC 4670

Multicast Group Membership Discovery MIBRFC 5519

Scope of delivery

Hardware Quick Reference (DE/EN), Installation Guide (DE/EN)Manual

Serial configuration cable, 1.5mCable

IEC power cordCable

Two 19" brackets for rackmounting19" brackets

Support

5 years, support via hotline and Internet KnowledgeBaseWarranty

Option for replacement of a defective device, item no. 10715LANCOM Warranty Advanced Option S

LANCOM Management Cloud

LANCOM LMC-A-1Y LMC License

LANCOM LMC-A-3Y LMC License

Accessories

Item number(s)

Gehäusezeichnung

LANCOM LMC-A-1Y License (1 Year), enables the management of one category A device for one year via the LANCOM Management
Cloud, item no. 50100

LANCOM LMC-A-3Y License (3 Years), enables the management of one category A device for three years via the LANCOM Management
Cloud, item no. 50101

LANCOM SFP-SX-LC1, item no. 615561000Base-SX SFP module

LANCOM SFP-LX-LC1, item no. 615571000Base-LX SFP module

61440 (EU)LANCOM GS-2310P+ (EU)

61441 (UK)LANCOM GS-2310P+ (UK)

www.lancom-systems.com

LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-Mail [e-mail]

LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for

technical errors and/or omissions. 05/17