TECHNICAL DATA
MOUNTING AND CONNECTING THE DEVICE
4
ConsoleReset
System
LANCOM GS-2310
LANCOM GS-2310
Quick Reference Guide
Serial connector (Console)
a
Connect the serial interface via the included serial conguration
cable to the serial interface of the device you want to use for
conguring / monitoring the switch.
TP Ethernet ports
b
Connect one of the TP Ethernet ports 1-10 via an Ethernet cable to
your end device or another LAN switch.
LANCOM GS-2310
System
ConsoleReset
a b c
SFP ports
c
Insert a suitable SFP module (e.g. 1000Base-SX or 1000BaseLX) into the SFP port. Choose a cable compatible with the SFP
module and connect it as described in the module’s
documentation.
Power connector (on the back side of the device)
d
Supply power to the device via the power connector on the
back. Please use the supplied IEC power cable.
D
a
b c d
a System
Off Device switched off
Green Device operational
b Reset button
5 seconds pressed Device restart
10 seconds pressed Device reset and restart
c TP Ethernet ports
Off Port inactive
Green Link 1000 Mbps
Orange Link ≤ 100 Mbps
d SFP ports
Off Port inactive
Green Link 1000 Mbps
Orange Link ≤ 100 Mbps
Hardware
Power supply Internal power supply unit (110–230 V, 50-60 Hz)
Power consumption max. 7.9 watts
Environment Temperature range 0–40 °C; humidity 10–90 %; non-condensing
Housing Robust metal housing with screw-on 19“ mounting brackets, network connectors on the front
Number of fans None; fanless design without rotating parts, high MTBF
Interfaces
ETH A 8 TP Ethernet-Ports 10 / 100 / 1000 Mbps
A 2 Combo-Ports (TP / SFP) 100 / 1000 Mbps (SFP) and 10 / 100 / 1000 Mbps (TP)
A 10 concurrent ports in total
Declaration of Conformity
Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.lancom-systems.
com/ce/
Package content
Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN), Cloud-ready sheet, FCC sheet
Mounting brackets Two 19” brackets for rackmounting
Cable IEC power cord, serial conguration cable 1.5 m
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered
trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111730/1217
Cloud-ready
Please observe the following when setting up the device
A Do not rest any objects on top of the device and do not stack
multiple devices
A For devices to be operated on the desktop, please attach the
adhesive rubber footpads
LANCOM 1681V
VDSL
ISDN Status
ETH 2
VPN
ETH 3
ETH 4
Online
ETH 1
Power
A Keep the ventilation slots on the side of the device clear of obstruction
A Mount the device into a 19” unit in a server cabinet
Ports 9 and 10 are combo ports. Either the TP- or the SFP port can be used at the same time.
Loading...