Websmart 26-port Gigabit Ethernet Switch for cost-effective networks
The websmart switch LANCOM GS-1326 is the ideal choice for networks in small and medium-sized businesses.
Able to network up to 26 devices, it offers a compelling price/performance ratio. It is equipped with 24 Gigabit
Ethernet ports and 2 combo ports (Ethernet or fiber optics) and it supports a wide range of security features.
The switch is operated via a user-friendly web interface.
a
24 Gigabit Ethernet and 2 combo ports (TP/SFP)
a
Security with configurable access control on all ports based on IEEE 802.1X
a
VLAN and QoS support
a
Browser-based configuration
a
IPv6 and IPv4 support for modern networks
Page 2
DATASHEET
LANCOM GS-1326
Reliable networking for up to 26 devices
The LANCOM GS-1326 is equipped with 24 Gigabit Ethernet
ports and 2 combo ports (Ethernet or fiber optics). This makes
the switch a reliable basis for modern network infrastructures
in small and medium-sized businesses.
Configurable access control
The LANCOM GS-1326 stops rogue clients from gaining
unauthorized access to the network. This is ensured by
secured access control on all ports as per IEEE 802.1X
(port-based, single-based, multi-based, and MAC-based).
Browser-based configuration
The switch is managed with a user-friendly web interface.
The LANCOM GS-1326 supports VLAN tagging based on
IEEE 802.1q and makes it easy to assign VLANs to the desired
switch ports. What's more, the incoming and outgoing data
traffic is reliably prioritized with a wide range of QoS features.
IPv6 and IPv4 support
Thanks to the dual-stack implementation, the LANCOM
GS-1326 operates in pure IPv4, pure IPv6, or in mixed
networks. This means that it can be managed via both IP
address standards, which makes it fully future-proof.
Page 3
DATASHEET
LANCOM GS-1326
Security
IEEE 802.1X
Access control lists
Isolated Group
Performance
VLAN
Energy efficiency (Green Ethernet)
Energy detection
Layer 2 switching
IGMP multicasts
Spanning Tree Protokoll (STP) / Rapid STP
/ Multiple STP
Interfaces
Ethernet
IEEE 802.1X access control on all ports; RADIUS for authentication, authorization and accounting with MD5 hashing; guest VLAN;
dynamic VLAN assignment
Layer 2 isolation between clients in the same VLAN ('protected ports''); support multiple uplinksPrivate VLAN edge
Locking of MAC addresses to ports; limiting of the number of learned MAC addressesPort security
Blocking access for illegal IP addresses on specific portsIP source guard
Drop or rate limitation of connections based on source and destination MAC addresses, VLAN ID, IP address, protocol, port, DSCP/IP
precedence, TCP/UDP source and destination ports, IEEE 802.1p priority, ICMP packets, IGMP packets, TCP flag
Authentication, authorization and accounting of configuration changes by RADIUSRADIUS
Multicast/Broadcast/Unicast storm suppressionStorm Control
Allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members ist blocked.
Traffic can only be sent from isolated group to non-isolalted group.
Store and forward with latency less than 4 microsecondsSwitching technology
Support of max 8K MAC addressesMAC addresses
Max. 52 Gbps on the backplaneThroughput
38.69 million packets per second (mpps) at 64-byte packetsMaximum packet processing
Port based and IEEE 802.1q tag based VLAN with up to 4,096 VLAN and up to 4,000 active VLANs; Supports ingress and egress packet
filter in port based VLAN
Jumbo frame support with up to 9k framesJumbo frame support
Energy efficiency according to IEEE 802.3az. Automatically turns off power on Gigabit Ethernet RJ-45 port when detecting link down
or Idle of client. Active mode is resumed without loss of any packets when the switch detects the link up
Adjusts the signal strength based on the cable length. Reduces the power consumption for short cableCable length detection
Support of 13 groups containing up to 4 ports each according to IEEE 802.3adLink Aggregation Control Protocol (LACP)
Support for up to 4K VLANs simultaneously (out of 4096 VLAN Ids); matching due to port, IEEE 802.1q tagged VLANs or MAC adressesVLAN
Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoSVoice VLAN
IGMP v1, v2, v3 to limit bandwidth-intensive multicast traffic to ports with requesters; supports 256 multicast groups; source-specific
multicasting
Support of multicast domains of snooping switches in the absence of a multicast routerIGMP querier
IGMP proxy to pass IGMP messages throughIGMP proxy
VLAN registration with GVRP according to IEEE 802.1q for automatic delivery of VLANs in bridged domainsGeneric VLAN registration
Standard Spanning Tree according to IEEE 802.1d with fast convergence support of IEEE 802.1w (RSTP); using Multiple Spanning Tree
instances by default according to IEEE 802.1s (MSTP)
1
24 TP ports 10/100/1000 Mbps
1
2 combo ports (TP/SFP) with 100/1000 Mbps (SFP) and 10/100/1000 Mbps (TP)
1
26 concurrent Ethernet ports in total
Management and monitoring
WEBconfig
Integrated web server with setup wizard for the configuration via Internet browsers with HTTP or HTTPS. Web interface with system
dashboard, configuration menu, maintenance and monitoring functions
Page 4
DATASHEET
LANCOM GS-1326
Management and monitoring
Port Mirroring
Firmware update
Hardware
Housing
Declarations of conformity*
Supported IEEE standards
Traffic can be mirrored from on port to another for investigation with network analyzer or RMON probe. Up to 8 ports can be mirrored
to a single mirror port. Single sessions can be selected
Access rights (read/write) can be set up separately, access control listSecurity
SNMP management via SNMPv1, v2c or v3 with support of traps. User-based security model for SNMPv3 (USM)SNMP
Diagnosis from the switch with PING and cable diagnosisDiagnosis
1
Update via WEBconfig and browser (HTTP/HTTPS)
1
Update via TFTP and LANconfig
1
Dual firmware image to update during operation
Automatic assignement of the management IP address by DHCPDHCP client
Automatic time settings with Simple Network Time Protocol (SNTP)SNTP
5,50 lbs (2,50 kg)Weight
Internal power supply unit (110–230 V, 50-60 Hz)Power supply
Temperature range 0–40° C; humidity 10–90%; non-condensingEnvironment
Robust metal housing, 19" 1U (442 x 44 x 170,3 mm > W x H x D) with removable mounting brackets, network connectors on the
front
None; fanless design without rotating parts, high MTBFFans
23 wattPower consumption (max)
EN 60950-1, EN 55022, EN 55024CE
FCC Part 15 (CFR47) Class AFCC
You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu*) Note
Link Layer Discovery Protocol (LLDP)IEEE 802.1AB
LLDP-MEDIEEE 802.1AB
Q-in-Q taggingIEEE 802.1ad
MAC BridgingIEEE 802.1d
Spanning TreeIEEE 802.1d
Class of ServiceIEEE 802.1p
VLANIEEE 802.1q
Multiple Spanning Tree Protocol (MSTP)IEEE 802.1s
Rapid Spanning Tree Protocoll (RSTP)IEEE 802.1w
Port Based Network Access ControlIEEE 802.1X
10Base-T EthernetIEEE 802.3
1000Base-TX EthernetIEEE 802.3ab
Link Aggregation Control Protocol (LACP)IEEE 802.3ad
Energy Efficient EthernetIEEE 802.3az
100Base-T EthernetIEEE 802.3u
Flow ControlIEEE 802.3x
Page 5
Reset
System
LANCOM GS-1326
DATASHEET
LANCOM GS-1326
Supported IEEE standards
1000Base-X EthernetIEEE 802.3z
Supported RFC standards
SNMP Generic TrapsRFC 1215
Simple Network Time Protocol (SNMP)RFC 1769
SMON MIBRFC 2613
HTTP AuthenticationRFC 2617
Hypertext Transfer Protocol Secure (HTTPS)RFC 2818
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Würselen I Deutschland I E-Mail info@lancom-systems.de
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for
technical errors and/or omissions. 02/17
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.