Lancer Delta 9100 User Manual
Delta 9100
Delta 9100 High Performance
Remote Recirculation System
The Lancer Delta 9100 CED Remote Recirculation system is a benchmark
in the fountain dispensing market. Built to the quality standards that
Lancer is known for, this compact unit utilizes cold carbonation and
a stainless steel recirculating pump to provide optimum temperature
product to a remote tower location. It is perfect for use with the
Lancer Unicorn dispensing unit, or any tower with up to six valves.
Delta 9100 High Performance Remote Recirculation System
> Cold carbonation
> Stainless steel cabinet, tank and product lines
> CFC free refrigerant
> Zero GWP structural insulation
> Lancer Electronic Ice Bank Control (EIBC)
> Lancer Electronic Liquid Level Control (LLC)
> Internal syrup pumps optional
(unit must be within 6 ft (2 m) of BIB location)
> Dispensing Solutions that Pour M ore
lancercorp.com
Delta 9100
High Performance
Remote Recirculation
System
SPECIFICATIONS
16 9/16”
421 mm
25 17/32”
674 mm
25 7/8”
657 mm
DIMENSIONS
Height: (without legs) 25.875” (657 mm)
Width: 16.563” (421 mm)
Depth: 25.531” (674 mm)
WEIGHT
Empty: 156 lbs (70.8kg)
Operating: 220 lbs (98.8 kg)
Shipping: 170 lbs (77.1 kg)
ELECTRICAL
115V/60hz
230V/50hz
WATER REQUIREMENTS
Minimum flowing pressure of 25 PSIG
(1.76 kg/cm2, 1.72 BAR)
Maximum static pressure of 50 PSIG
(3.52 kg/cm2, 3.45 BAR)
ICE BANK WEIGHT
25-28 lbs (11.3kg - 12.7kg)
2
CARBON DIOXIDE (CO
Minimum pressure of 70 PSIG
(4.92 kg/cm2, 4.83 BAR)
Maximum pressure of 80 PSIG
(5.62 kg/cm2, 5.52 BAR)
) REQUIREMENTS
Customer Ser vice:
Should you require more information about our products, please do not
hesitate to contac t our customer ser vice desk at custserv@lancercorp.com.
Warranty:
For warranty specifics by produc t, contact your Lancer Sales Representative.
Equipment design and/or specifications are subject to change without notice.
Lancer Corp. 6655 Lancer Boulevard · San Antonio, TX 78219
210-310-7000 · 1-800-729-1500 · Fax: 210-310-7250
Model
9100
WARNING
If water source exceeds 50 PSIG (3.52 KG/CM2),
a recommended water regulator assembly
(PN 18-0253) must be used to limit water
pressure to 50 PSIG (3.52 KG/CM2).
Failure to use regulator will result in improper
performance of dispenser.
Pour More
lancercorp.com
Delta 910 0 Spec Sheet 01 /13
Loading...