La Crosse Technology T83653v2 Instruction Manual
Model: T83653v2 www.lacrossetechnology.com/support Page | 1
Model: T83653v2
Instruction manual
DC: 012916
WIRELESS COLOR FORECAST STATION
Mold Risk for Forecast Station & Indoo r Remote Sensor Location
Batteries
3 “AAA”
BACK
VIEW
AC adapter
HX09-0501500-AU
USB
Port
BUTTONS
Color Animated Forecast with Tendency
Indoor
Humidity &
Temperature
with Trend
and Alerts,
Indoor
Comfort
Statement +
Button Press
for Mold Risk
Indicator
Remote
Humidity &
Temperature
with Trend
and Alerts (up
to 3
channels),
Remote
Comfort
Statement +
Button Press
for Mold Risk
Indicator
FRONT
VIEW
Time, Alarm + Calendar
AAA
AAA
AAA
Model: T83653v2 www.lacrossetechnology.com/support Page | 2
Remote Sensor TX141TH-BCH
Get Started
1. Insert the 5.0 volt AC cord (included) into the wall outlet then into the
forecast station.
2. Insert 3 new AAA Alkaline batteries (not included) into the forecast
station. Observe the correct polarity.
3. Insert 2 new AA batteries (not included) into the TX141TH-BCH
remote sensor. Observe the correct polarity. The red LED will flash
during transmission.
4. After 15 minutes mount the sensor outside in a shaded location.
Transmission range is 300 feet (91 meters) open air.
Restart: If the outdoor temperature shows dashes, unplug the AC
adapter and remove batteries from the forecast station and remote
sensor for 15 minutes. Return to Step 1 above.
Set Time, Date, Temperature Unit
Hold the SETTINGS button to enter settings mode.
1. Press the + or - buttons to adjust the values.
2. Press the SETTINGS button to confirm adjustments and move to the
next item.
SETTINGS ORDER:
1. Beep ON/OFF
2. 12/24 hour time format
3. Hour
4. Minutes
5. Year
6. Month
7. Date (day of the week will set automatically)
8. Fahrenheit/Celsius
Batteries
2 “AA”
LED
Transmit button (TX)
Sensor Channel Selector
AA
AA
Model: T83653v2 www.lacrossetechnology.com/support Page | 3
Press the SETTINGS button to exit, or wait 20 seconds without pressing
buttons to return to the normal time display.
Set Indoor and Remote Temperature Alerts
1. Hold the ALERTS button for 3 seconds to enter alert set mode.
2. The temperature alert value will blink in set mode.
3. Press the
- or + buttons to adjust the values.
4. Press the ALERTS button to confirm
5. Press the
- or + buttons to arm or disarm the Alert and move to the
next alert.
The alert setting order:
INDOOR HUMIDITY HI INDOOR HUMIDITY LO INDOOR TEMP HI
INDOOR TEMP LO OUTDOOR HUMIDITY HI OUTDOOR
HUMIDITY LO OUTDOOR TEMP HI OUTDOOR TEMP LO
Note: When using multiple sensors, press the + button to select the
channel (1, 2, or 3) before entering Alert Set Mode.
Press the ALERTS button to exit, or wait 20 seconds without pres s ing
buttons to return to normal time display.
Arm/Disarm Temperature/Humidity Alerts
Press and release the ALERTS button to toggle between the alerts:
INDOOR HUMIDITY (HI/LO) OUTDOOR HUMIDITY(HI/LO)
INDOOR TEMP (HI/LO) OUTDOOR TEMP (HI/LO)
• Press the
+ button to arm the alert.
• Press the
- button to disarm the alert.
• The HI or LO alert icon appears when armed.
Active Temperature Alert
• Beeps once per minute with flashing alert icon.
• Press and release the ALERTS button to toggle between the alerts.
• Press the
- button to disarm the alert.
Adjust Backlight
When using AC power:
• AC power required for a constant backlight.
• Press the LIGHT button to adjust the backlight (Bright/Dim/Turn Off)
when using AC power.
When using Battery power only:
• Press the LIGHT button for 10 second backlight (will not stay on).
Loading...