Step 1: Insert the 5 volt AC cord (included) into the wall outlet then into the weather
station.
Step 2: Insert the 2 new AA batteries (included) into the TX143TH remote sensor.
Observe the correct polarity. The red LED will flashes during transmission.
Restart: If there is no remote temperature data after 3 minutes, unplug the AC adapter
and remove batteries from the remote sensor for 15 minutes. Return to Step 1.
Table of Contents
High Resolution Display ............................................................................................................................. 1
Table of Contents ...................................................................................................................................... 2
Features ........................................................................................................................................................ 3
Detailed Setup: Weather Station and Remote Sensor ............................................................... 4
SET Button: ................................................................................................................................................... 4
Set Time, Date, Temperature Unit ..................................................................................................... 8
12-hour or 24-hour Time Format .............................................................................................................. 8
Set Time ......................................................................................................................................................... 8
Set Calendar .................................................................................................................................................. 8
Alarm Set ..................................................................................................................................................... 9
Backlight Adjustments HI / LOW / OFF .......................................................................................... 5
Temperature Alerts .................................................................................................................................. 9
Active Temperature Alert/Turn Alert OFF .............................................................................................. 10
La Crosse Technology® introduces a NEW vivid Color Weather Station with a
high resolution, liquid-crystal display. View forecast in detailed photo-color scenes, track
indoor/outdoor temperature and humidity, and set temperature alerts-all on one device.
Features
Day/Night forecast icons and forecast tendency
Photo-color forecast scenes picture background
Forecast with tendency arrow: sunny, partly sunny, cloudy, rainy, stormy, snowy
12 hour forecast based on changing barometric pressure
Time (manual set)
12/24 hour time format
Perpetual Calendar (Day/Month/Date)
Backlight options: Hi / Low / Off
Low battery indicator for station and sensor
Alarm Time with Snooze
Indoor comfort level indicator
Indoor humidity and trend with daily MIN/MAX
Indoor temperature and trend with daily MIN/MAX
Indoor temperature alerts (LOW/HI)
Outdoor temperature and humidity
Sensor strength indicator
Barometric pressure history graph
Outdoor humidity and trend with daily MIN/MAX
Outdoor temp. and trend with daily MIN/MAX
Heat Index/Dew Point readings
Outdoor Temperature Alerts (LOW/HI)
Indoor temperature and humidity
Outdoor air condition
Open/Close window suggestion to achieve ideal indoor comfort
Note: Please note that the images displayed in this manual are for reference only. The
correct values of temperature, humidity and forecast will display cordially to your
conditions.
1. Press the DISPLAY button to select the Indoor or Outdoor
Temperature has risen in the past 3 hours.
Humidity has risen in the past 3 hours.
Temperature has not changed in the past 3 hours.
Humidity has not changed in the past 3 hours.
Temperature has fallen in the past 3 hours.
Humidity has fallen in the past 3 hours.
page.
2. Hold the ALERT button for 3-5 seconds
3. The low temperature alert value will flash.
4. Press the ▼ or ▲ buttons to adjust the low alert values.
5. Press the ALERT button to confirm & move to activate the
alert.
6. Press the ▼ or ▲ buttons to turn the low alert ON/OFF.
7. Press the ALERT button to confirm & move to the high temperature alert. The high
alert will flash.
8. Press the ▼ or ▲ buttons to adjust the values.
9. Press the ALERT button to confirm & move to activate the alert.
10.Press the ▼ or ▲ buttons to turn the high alert ON/OFF.
11.Press the ALERT button to confirm & exit alert settings.
Press the ALERT button to exit, or wait 20 seconds without pressing buttons to return to
normal time display.
Active Temperature Alert/Turn Alert OFF
Active alert emits a series of beeps once per minute with a flashing yellow
alert ON icon.
Turn Alert Off:
Hold the ALERT button for 3-5 seconds. The low alert value will flash.
Press the ALERT button until the flashing yellow alert ON icon is selected.
Press the ▼ or ▲ buttons to turn the alert OFF.
Note: Change the value of the alert higher/lower if desired and leave the alert ON.
Temperature/Humidity Trend indicators
The indoor and outdoor temperature/humidity trend indicators will update every 30
minutes or less. These trends represent temperature changes over the past three hours.
Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At
1:30pm, the arrow will indicate the temperature change since 10:30am.
Search for Outdoor Sensor
Hold the ▲ button to search for the outdoor sensor.
The temperature reading will show dashes until reconnected.
Open the outdoor sensor and press the TX button to send a signal.
This station learns; please allow 3 to 4 weeks for barometric calibration. This will ensure an
accurate personal forecast for your location.
Note: It is important that Time and Date are set for the Day/Night changes are as specified.
These are daily MIN/MAX readings that automatically reset.
Indoor and Outdoor MIN/MAX temperatures are constantly displayed on the indoor
and the outdoor pages.
The forecast station will show the daily minimum and maximum temperatures each
day starting at midnight (12:00 AM).
The forecast station automatically resets the min/max temperatures at midnight
(12:00 AM).
MIN/MAX (View, Reset)
Heat Index/ Dew Point
Outdoor heat index and dew point temperatures are constantly displayed on the
outdoor page.
Open/Close Window Recommendations
Note: Open/Close Window Indicator is a suggestion to achieve ideal indoor comfort
Open Window:
Humidity: 32-75%
Temperature: 62- 78 degrees
When both outdoor temperature and humidity are in this range the
window stays open. If either the humidity or the temperatures are out
of this range the window goes to the closed position.
Closed Window:
Humidity: 1-32% and 76- 100%
Temperature: -40 to 61 and 79 to 140 degrees
When either the outdoor temperature or humidity are in this range the window stays
closed.
Color Forecast Icons
Animated forecast icons use changing atmospheric pressure to predict weather
conditions for the next 12-hours with 70-75% accuracy.
Working with the forecast icons, the tendency indicators let you know if the weather is
improving, steady or worsening.
Forecast Tendency Indicators (Up, Right, Down Arrows)
24 Hour Pressure History Graph
The bar chart indicates the air pressure history trend over the
last 24 hours.
The “0” is equal to the current pressure and each bar represents
how past pressure was compared to the current pressure.
Read the graph from left to right. If the bars are rising, it means
that the weather is getting better due to the increase of air pressure.
If the bars go down, it means the air pressure has dropped and the weather is
expected to worsen from the present time.
Seasonal Day/Night changes to Forecast Icons.
On the Forecast page, the tree foliage will change seasonally.
The entire background will change daily between night images and day images.
The Outdoor page will show the day/night changes with the forecast icon.
Note: Average sunrise and sunset times were used because of the different sunrise and
sunset times across the United
Outdoor Sensor Positioning and Use
Mount the outdoor sensor on a north-facing wall or in any well shaded area. Under
an eave or deck rail is preferred.
The maximum wireless transmission range to the weather station is over 300 feet
(91.44 meters) in open air, not including walls or floors.
Be sure the outdoor sensor is mounted vertically.
Care and Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Always purchase the correct size and grade of battery most suitable for intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed with correct polarity (+and -).
Remove batteries from equipment with is not to be used for an extended period of
time.
Remove used batteries promptly.
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents or scouring agents.
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for public information. It is
intended for home use only.
The specs of this product may change without prior notice.
Improper use or unauthorized opening of housing voids warranty.
If the product is not working properly, change the batteries and/or check the AC cord
Temperatures below - 20°F (-29°C) require Lithium
batteries in the outdoor sensor
Humidity Range:
Distance:
Over 300 ft. (91.44 meters) RF 915MHz (open air)
Power
Weather Station
AC Power:
AC Adapter No.:
5-volt power adapter (included)
HNBB050100WU
TX143TH Outdoor sensor :
2-AA, IEC, LR6 batteries (not included)
Battery Life
TX143TH Outdoor sensor :
Battery life is over 24 months when using reputable
battery brands for both Alkaline and Lithium batteries
Dimensions
Weather Station:
5.09"L x 1.37"W x 8.46"H (129.33 x 34.92 x 214.92 mm)
TX143TH Outdoor sensor:
1.57"L x 0.79"W x 5.12"H (40 x 20 x 130mm)
19%-99% (RH)
19%-99% (RH)
Warranty Information
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of
purchase) on this product relating to manufacturing defects in materials & workmanship.
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
For warranty work, technical support or other information contact:
La Crosse Technology, Ltd
2830 South 26th St.
La Crosse, WI 54601
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or
sensor. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user
authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or
duplicated or processed using electronic, mechanical or chemical process without the
written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly
checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.