La Crosse WS-8418U-IT User Manual

Model: WS-8418U-IT

Instruction Manual!

DC: 062915

ATOMIC WALL CLOCK

With Moon Phase and IN/OUT Temperature

WS-8418U-IT www.lacrossetechnology.com/support Page | ! 1

Time, Alarm, +
WWVB Icon

Foldout Stands

Indoor Temp,

Month, Date,

+ Moon Phase

Battery

Cover

TX37U-IT

Sensor

Buttons

Battery

Compartment

2 “AA” batteries

SET + ALM SNZ

Outdoor Temp
+ Weekday

Wall Hanging Hooks

Front

Back

Get Started

Step 1: Insert 2 fresh AA, batteries into the TX37U-IT sensor according

to the polarity marked in the battery compartment.
Step 2: Insert 2 fresh AA, batteries into the atomic clock according to the
polarity markings.

Step 3: After 5 minutes place the sensor outside in a shaded location.

Set Time, Date, 12/24 Hour, and Temperature Units

1. Press the SET button to enter time set mode, confirm adjustments

and move to next item.

2. Press the + button to adjust values.

Settings order:Time Zone

1. Daylight Saving Indicator

2.

LanguageHour

3. Minutes

4. Year (2 digit)

5. Month

6. Date

This clock has time zones from

GMT 0 to +/-12h

North American time zones:

-4

ATL

Atlantic

-5

EST

Eastern (default)

-6

CST

Central

-7

MST

Mountain

-8

PST

Pacific

-9

ALA

Alaska

-10

HAW

Hawaiian

Languages

US

English

F

French

E

Spanish

d

German

WS-8418U-IT www.lacrossetechnology.com/support Page | ! 2

SET

+

7. Weekday

8. 12/24 Hour Format

9. Fahrenheit/Celsius

Press SET to exit, or wait 15 seconds without pressing buttons to return
to the normal time display.

Set Alarm Time

1. Hold ALM to enter ALM set mode.

2. Press + to adjust values.

3. Press ALM to confirm adjustments and move to next item.

Setting order: 1. Hour, 2. Minutes
Press ALM to exit, or wait 15 seconds without pressing buttons to return
to the normal time display.

Deactivate/Activate ALM

•

Press ALM once to deactivate the alarm.

•

The alarm icon will disappear.

•

Press ALM once to activate the alarm.

•

The alarm icon will appear.

Snooze

•

Press SNZ to silence an active alarm for 10 minutes.

•

The alarm icon will flash.

•

Press any button to stop the alarm for 24 hours.

Seconds Display Features

There are four display modes to view the weekday, seconds, and
temperatures. The seconds may replace the Indoor temperature,

Outdoor Temperature or Weekday. If seconds are counting up on the
clock, press the + button to move or remove this feature.

Default display: month&date/weekday/indoor temperature /outdoor
temperature.

Change the display:

1. Press the + button. The display should now show the month&date/

weekday/seconds/outdoor temperature.

2. Press the + button a second time and the display will show the

month&date/weekday/indoor temperature/seconds.

3. Press the + button a third time and the display will show the

month&date/seconds/indoor temperature/outdoor temperature.

Press the + button a fourth time and the display will return to the
default display.

WS-8418U-IT www.lacrossetechnology.com/support Page | ! 3

ALM

Alarm

Icon

SNZ