La Crosse W85923 Setup Guide

Projection Alarm Clock

Model: W85923 | Quick Setup Guide

with Indoor Temperature

INTRODUCTION:

The Projection Alarm Clock features manual set time with project i on, 12-hour/24-hour option, time alarm with snooze, indoor temperature with minimum and maximum readings all in a simple, easy-to-read display.

PROJECTION ALARM CLOCK

SETUP INSTRUCTIONS STEP-BY-STEP: STEP 1:

• Insert the 4.5 volt AC power adapter into the designated area on the back of the Projection Alarm Clock.

• Insert the power adapter plug into a wall outlet for a continuous backlight and projection.

• The Projection Alarm Clock will light up and show indoor temperature and time (12:00).

STEP 2: (battery-backup operation for power outages)

• Remove battery cover from Projection Alarm Clock, slide t ab down and pull out to remove the cover.

• Insert 2 NEW AAA batteries (not included) into the back of the Projection Alarm Clock. Observe the correct polarity (see marking inside the battery compartment).

• Note: Backlight and projection will not display constant l y when operating on battery power. They will appear for 3 seconds when the SNOOZE/LIGHT button is pressed.

• Do Not Mix Old and New Batteries

• Do Not Mix Alkaline, Standard, Lithium or Rechargeable

Batteries

PROGRAM MENU: TIME SET: Be sure the Time is showing or

press and release the MODE button to move to Time Mode.

• 12/24 HOUR TIME: With time displayed, hold the SET button and 12Hr will flash. Press and release the UP or DOWN button to select 24Hr. Confirm with the SET button and move to the hour.

• HOUR: The hour will flash. Press and release the UP or DOWN button to select the correct hour. Confirm with the SET button and move to the minutes.

• MINUTES: The minutes will flash. Press and release the UP or DOWN button to adjust the minutes. Confirm with the MODE button to exit time set.

CALENDAR SET: From Time Mode, press and release the MODE button twice to move to Calendar Mode. The year will show in the time area.

• YEAR: Hold the SET button to enter Calendar Set. The year will flash. Press and release the UP or DOWN button to select the correct year. Confirm with the SET button and move to the month.

• MONTH: The month will flash. Press and release the UP or DOWN button to select the correct month. Confi rm with the SET button and move to the date.

• DATE: The date will fl ash. Press and release the UP or DOWN button to select the correct date. Confirm with the MODE button to exit calendar set. Note: The weekday will set automatically as you set the year, month

and date.

ALARM SET: From Time Mode, press and release the MODE button once to move to Alarm Mode. The alarm time will show in the time area and the letters AL will show next to the temperature.

• ALARM HOUR: Hold the SET button to enter Alarm Set. The hour will flash. Press and release the UP or DOWN button to select the correct hour. Confirm with the SET button and move to the minutes.

LARM MINUTES: The minutes will flash. Press and rel ease the UP

• A or DOWN button to adjust the minutes. Confirm with the MODE button to exit.

ALARM ON/OFF: Press and release the MODE button to move to Alarm Mode (AL).

• ON: With the Alarm time showing, pres s and release the UP button to activate the alarm. When the alarm is active the alarm icon will display in the upper left corner.

• OFF: With the Alarm time showing and alarm is active, press and release the UP button to deactivate the alarm. The alarm icon will not appear when the alarm is inactive.

SNOOZE:

• When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm for 4 minutes. The snooze icon Zz will flash after the hour.

• Press any button to turn off the snooze feature when the snooze alarm sounds. The snooze icon will disappear.

BACKLIGHT:

• Battery Power: Press and release the SNOOZE/LIGHT button on the top of the projection clock to show the backlight for 3 seconds. Note: Backlight will not display constantly when operating on battery power.

• A/C Power: Backlight is displayed constantly.

PROJECTION:

TIME will project continually when operating with the a/c power cord. YEAR will project for about 30 seconds when in Calendar mode. ALARM TIME will project for about 30 seconds when in Alarm mode.

TIME YEAR ALARM

• Battery Power: Press and release the SNOOZE/LIGHT button to show the projection for 3 seconds. Note: Projection will not display constantly when operating on battery power.

• A/C Power: Projection is displayed constantly. Focus Projection: Use the focus wheel on the back of the

projection arm to focus the projection image. Aim the projection on the wall or ceiling 2-6 feet away for best projected image.

• Projection Arm: The projection arm will rotate 180 degrees to allow you to project on the wall or ceiling. Adjust the focus of the projection with the focus wheel on the back of the projection arm.

Projection Arm Rotates

FAHRENHEIT/CELSIUS: From a normal dis play (time showing), press and release the SET button to switch from Fahrenheit to Celsius.

MAX/MIN RECORDS:

• VIEW: Press and release the MAX/MIN button to view the minimum

then maximum indoor temperature.

• MANUAL RESET: The Minimum and maximum value will reset

independently.

o Press the MIN/MAX button to view either the minimum or maximum

temperature.

o Press the DOWN button to reset the value. You will see dashes for

about five seconds then the minimum or maximum value reset will display current temperature as the new min/max value.

RESET BUTTON:

If the clock display appears distorted or is not responding to buttons, use a pen or paperclip to press and release the RESET button one time. This will reset the Projection Alarm Clock to default settings.

CARE AND MAINTENANCE:

• Do Not Mix Old and New Batteries

• Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries

• Do not expose the Projection Alarm Clock to extreme temperatures,

vibration or shock.

• Keep the Projection Alarm Clock dry.

• Clean the Projection Alarm Clock with a s oft damp cloth. Do not use

solvents or scouring agents.

• The Projection Alarm Clock is not a toy. Keep it out of reach of

children.

• The Projection Alarm Clock is not to be used for medical purpose or for

public information, but is determined for home use only.

• Improper use or unauthorized opening of housing will void the

warranty.

• If the Projection Alarm Clock does not work properly, change the

batteries and/or check the a/c cord connection.

SPECIFICATIONS: Indoor:

Temperature Range: +32 °F to +122°F (0°C to 50°C)

Power:

Projection Alarm Clock: 4.5-volt a/c power adapter (included)

Optional 2-AAA, IEC, LR3 batteries (not included)

Battery Life:

Projection Alarm Clock Battery Backup: Battery life is over 24 months when using the AC

adapter for primary power

Dimensions:

Projection Alarm Clock: 5. 91” L x 2.17” W x 4.33” H (150 x 55 x 110 mm)

WARRANTY INFORMATION La Crosse Technolog y, Ltd pr ovid es a 1-year limited warranty on this pr od uct against manufacturing defects in materials and workmanship.

This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can onl y be perf o rm e d by a La Cros se Tec hn ol o g y, Ltd

authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, yo u will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting the La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only.

The La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in the owner’s manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference.. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adj ustm en t s, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances.

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.

This warranty gives you speci fi c legal ri ghts. You may also have other rights specific to the State. Some States do not allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you.

or warranty w ork , technical sup port, or information contact:

La Crosse Technology, Ltd 2817 Losey Blvd. S. La Crosse, WI 54601

The complete instruction manual is available at: www.lacrossetechnology.com/w85923

FCC Disclaimer:

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditio ns: (1 ) Thi s devi c e ma y not cau se ha rm ful inter fe ren ce, and (2) the device must accept any interference received, including interference that may cause undesired oper ation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT

All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without w ritte n perm i ssion of the publisher. This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged.

Contact Support: 1-608-782-1610 Product Registration: www.lacrossetechnology.com/support/register