La Crosse TX60U-IT User Manual
Warranty
La Crosse Technology, Ltd. provides a 1-year limited tim e warr a nty (f ro m date
of purchase) on this product relating to manuf actur ing defects in materials &
workmanship.
Before returnin g a product, please contact our friendl y customer
support with que stions or visit our o n line help (manuals a nd
FAQS):
Phone: 1-608-785-7920
Email Support: http://www.lacrossetechnology.com/support/alerts/
Register Product:
http://www.lacrossetechnology.com/support/register/
Full warranty deta ils online:
http://www.lacrossetechnology.com/warranty_info.pdf
Warranty Address: Protected under U. S. P atents:
La Crosse Technology, Ltd 5,978,738 | 6,076,044 |RE43903
2830 S. 26
La Crosse, WI 54601
th
St.
FCC Statement
This equipment has been tested and found to comply with the limits fo r a Clas s B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protectio n against har mful interference in a residential
installation. This equipme nt gener ate s , uses and can rad iate r adio fr e q uency
energy and, if not installed and used in accordance with the ins tructions, may
cause harmful interference to radio communica tio ns . How e ver, there is no
guarantee that interference will not occur in a par tic ula r ins tallatio n. If this
equipment does cause harmful interfer e nc e to radio or tel evisio n r ece ption, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measur es:
Reorient or relocate the receiving antenna.
• Increase the separation between the equip me nt and rec e iver.
• Connect the equipment into an outlet on a circuit different fro m that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV techni c ian for hel p .
This device must not be co-located or operating in conjunctio n w i th any o ther
antenna or transmitter. Operation is subject to the following two conditions:
(1) this device may not cause ha r mful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interf er e nce c aused by
unauthorized modificatio ns to this equip m e nt. S uch modifications could void the
user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, eve n in part,
or duplicated or processed using elec tro nic , mec hanic al or chemical process
without the written permission of the pub lis he r.
This booklet may contain errors or misprints . The infor m ation it contains is
regularly checked and corrections are includ e d in subsequent editions. We disclaim
any responsibility for any technical er ro r or printing e rror, or their consequences.
All trademarks and patents are recognize d . DC: 12/16/2014
Model: TX60U-IT
Quick Start Guide
Pkg:
AddOn Sensor
System Requirements
Smartphone or tablet (mobile device) with Safari on iOS 6+, or
Chrome/Stock on Android 4.0+ (versions subject to change - see
recent at http://support.lacrossealertsmobile.com/requirements
)
Package Contents
1. Sensor TX60U-IT
2. Probe (one included on marked packages) – Dry, Wet, or
Wet-Threaded (optional use)
3. Screws & anchors
4. Quick Start Guide (this document)
Not Included
• Mobile device with cellular or wifi service (see
http://www.lacrossetechnology.com/disclaimers/
)
• High speed internet service and router
• 2 AAA IEC LR03 1.5V alkaline batteries
• GW1000-U gateway, KA12A200010023U 20V power
adaptor, and cat5 LAN cable
Mobile Application (available online)
• iOS App Store, search La Crosse Alerts Mobile
• Android Play Store, search La Crosse Alerts Mobile
Gateway Hardware Cabling (if not registered*)
• Connect LAN
cable between router &
gateway.
• Insert a/c power
in gateway.
• Watch for 4 red
blinks (if not, see
diagnose gateway)
*a registered gateway shows a solid red light (verify existing
status before add sensor)
TX60U-IT http://www.support.lacrossealertsmobile.com TX60U-IT http://www.support.lacrossealertsmobile.com
Sensor Preparation
• Insert (optional)
probe in socket)
• Insert 2 AAA
batteries, se e
polarity inside
case
Download La Crosse Mobile App
• iOS App Store, search La Crosse Alerts Mobile
• Android Play Store, search La Crosse Alerts Mobile
Follow directions on the mobile device screen to register;
for assistance, review help within the application.
Factory Reset
(try before support request on unregistered pieces)
Gateway – remove a/c, hold gray button, reinsert a/c, release
button after see: red light on – red light off – red light on; try
registration when red light shows 4 blinks
Sensor – press and hold gray button until segments fill with
18.88; try registration when counting begins
Diagnose Gateway Lights
1 blink – LAN cable missing; cable or port bad
2 blinks – no internet protocol (IP) address from ro uter
3 blinks – no DNS resolve; aka can’t find server
4 blinks – ready to register
Both Blink – existing registration not deleted
No Lights – check a/c power or factory reset
Solid Red – registered gateway
Contact Support
Submit a request for email response at
http://www.lacrossetechnology.com/support/alerts/
Resources
• Product Info: http://www.lacrossealertsmobile.com
• Online help: http://support.lacrossealertsmobile.com
• Email Support:
http://www.lacrossetechnology.com/support/alerts/
• Phone: 608-785-7920
Notes (e.g. record gateway ID, user account name):
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
Specifications
Sensor RF Range 200 feet (60.96m) open spac e
Temperature -40
Probe (optional) -40
Water H20 or Dry
Size 5.23” H x 0.76” W x 1. 44” D
o
F to 140oF with 0.2o resolution
o
F to 140oF with 0.2o resolution
Care and Maintenance
• Do not mix old and new ba t teries
• Do not mix Alkaline, St andard, Lithium or Rechargeable
Batteries
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery c ontacts and also those of the device prior to
battery installa tion.
• Ensure the batteries are installed with correct polarity (+and -).
• Remove batteries from equipment which is not to be used for an
extended period of time.
• Remove expired batteries pr omptly.
TX60U-IT http://www.support.lacrossealertsmobile.com TX60U-IT http://www.support.lacrossealertsmobile.com
Loading...