La Crosse S84107 Quick Setup Manual

QUICK SETUP GUIDE

Atomic Forecast Station

with Moon Phase

STEP 1: POWER UP

Install batteries into your sensors & station in any order. Plug the
included power cord into an outlet and then into the station. The power
cord is required at all times.
Note: For detailed instructions on how to power up your station & sensor,
please review the full manual.

STEP 2: MOUNTING BASICS

THERMO-HYGRO

Keep out of direct sunlight & ensure the sensor is well-ventilated. We
recommend mounting under a deck or eave facing north.
Watch sensor mounting video: http://bit.ly/TH_SensorMounting

DISPLAY ICONS

Model: S84107

DC: 080817

www.lacrossetechnology.com/support/S84107

STEP 3: BASIC SETTINGS

Hold the SET button to enter set mode. Use +/- buttons to adjust and
SET to confirm.

Setting Order: 1. Language, 2. Beep ON/OFF, 3. Atomic ON/OFF,

4. DST ON/OFF, 5. Time Zone, 6. 12/24, 7. Hour, 8. Minutes, 9. Year,

10.Month, 11. Date, 12. °F/°C, 13. Pressure INHG/HPA, 14. Pressure number

Trend Arrows

Humidity

Alert IconFahrenheit | Celsius

Low Battery

AM | PM

Moon Phase

-24h-18h -12h -9h- 6h -3h0 h

Atomic Time Sensor Reception

DST Indicator

Seasonal Trees

Forecast IconsTemperature

Pressure GraphHumidity Percent RH

WE’RE HERE TO HELP!

STATION & SENSOR SPECS

FCC STATEMENT

FIND FULL MANUALS & SUPPORT

www.lacrossetechnology.com/S84107

JOIN THE CONVERSATION

Ask questions, watch detailed setup videos, and

provide feedback on our social media outlets!

NEED MORE HELP?

If you require additional support, call our friendly

customer support representatives based out of our

oce in La Crosse, Wisconsin.

Phone: [phone]

Our knowledgeable customer support team is

available Monday-Friday, 8am-6pm CST.

STATION DISPLAY (S84107)

· Indoor Temperature Range: 32°F to 99°F (0°C to 37°C)

· Indoor Humidity Range: 10% to 99%RH

· Relative Pressure Range: 23.62 to 32.48 inHg (800 to 1100 hPa)

· S84107 Power Requirements: 5.0V AC Adapter + 3 “AA” Batteries

THERMOHYGRO (TX141TH-Bv2)

· Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)

· Outdoor Humidity Range: 10% to 99%RH

· Transmission Range: 300 feet (91 meters) open air RF 433MHz

· Power Requirements: 2 “AA” Batteries (not included)

WARRANTY INFO

La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing

defects in materials & workmanship.

For Full Warranty Details, Visit: www.lacrossetechnology.com/support

CARE + MAINTENANCE

Do not mix old and new batteries.
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Always purchase the correct size and grade of battery most suitable for
intended use; Clean the battery contacts and also those of the device
prior to battery installation; Ensure the batteries are installed with
correct polarity (+ and -); Remove batteries from equipment that will not
to be used for an extended period.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

• Increase separation between equipment & receiver.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or
transmitter.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may

cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by
unauthorized changes or modifications to this equipment. Such changes or modifications
could void the user authority to operate the equipment.

All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated
or processed using electronic, mechanical or chemical process without the written permission of
the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and
corrections are included in subsequent editions.

We disclaim any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.