La Crosse LTV-TH1 User Manual

Thermo-hygro Sensor

Hole for
mounting

LED Light

TX

∙ Press TX to

send a signal

Model: LTV-TH1

TX

Battery Cover

+

AA

-

-

AA

+

DC: 083017

Power & Mounting

1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash
when transmitting.

Mounting:

1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw
through the front of your sensor.

2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is
preferred to avoid inaccurate readings from the sun.

3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open
air, not including walls or floors.

4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.
Note: Watch sensor mounting video: http://bit.ly/TH_SensorMounting

Sensor ID

Standalone station:

Your sensor has a bar code and ID number. This ID number locks your sensor into
your station. Follow the instructions in your station manual to delete the sensor ID
for sensor replacement.

La Crosse View™ compatible system:

The sensor ID and bar code are recognized by the La Crosse View™ app if you are using
this sensor as an add-on to your existing La Crosse View™ compatible system.

To add this sensor to your existing La Crosse View™ compatible system:

1. Open your La Crosse View™ app to add sensors.

2. From Main Menu - select “Devices” under “Add/Edit”

3. On Edit Devices page - select “ADD DEVICE”

4. Scan Device ID - Scan the bar code on your sensor or press inside the Device ID search box to enter
your code manually. Once entered, select “Search”.

5. On Confirm Device page - Confirm the sensor image and model number are correct and select “YES”

6. On Enter Device and Location Names page - enter Device Name and select a location or enter
a Location Name for your sensor. Select “DONE”.

Note: This sensor cannot connect to the La Crosse View app without a La Crosse View compatible
station. Station’s that are La Crosse View compatible have built-in Wi-Fi capabilities that send your
sensor’s data to the La Crosse View app. For more information about our new connected stations visit:

http://www.lacrossetechnology.com/products/connected

Let’s Be Social!

JOIN THE CONVERSATION
Follow us on our social media outlets for the latest promotions, product support, and awesome
giveaways.

Help Us, Help You!

If you have ideas for features or support solutions you’d like to see us make, please let us know! We tru­ly want to make owning a La Crosse Technology product not only a practical experience, but also a fun
one. So email us at: [e-mail]