LaCie NS-DSC1112, NS-DSC1112P, NS-DSC1112-CN User Manual

NS-DSC1112/NS-DSC1112P/NS-DSC1112-CN

Quick Setup Guide

Congratulations on your purchase

of a high-quality Insignia product.

Your Insignia digital camera is

designed for reliable and trouble-

free performance. Use this guide for

initial setup of your camera. If you

have questions, see your User Guide

for more information.

Package contents

Digital camera

Wrist strap

USB cable

2 AA alkaline batteries

Quick Setup Guide

CD with User Guide

1

Getting to know your camera

Front view

Back view

Top view

LCD

Bottom view

2

Left side
view

1 Flash
2 Self-timer / focus assist LED: lights

when the focus assist function is
being used. Flashes to indicate that
the self-timer is activated.

3 Microphone
4 Lens
5 LCD
6 Zoom button
7 Operation lamp: lights green when

the camera is on. Flashes when
your camera is processing photos
or videos, or when the  ash is
charging.

8 Mode switch
9 Delete button
10 OK/DISP button/4-way

navigation control:
: Face detection, : Self­ timer, : Macro, : Flash
NOTE: the Macro, Face detection,
Self-Timer, and Flash buttons are
also used to navigate through the
on-screen menus

11 M (menu) button
12 Speaker
13 LCD backlight button: press to

increase the LCD brightness for
10 seconds.

14 (power) button
15 Shutter button
16 Strap ring
17 Battery / SD/SDHC card

compartment

18 Tripod socket
19 USB connector

Installing batteries

1 Make sure that your camera is turned o .
2 Slide the cover in the direction of the arrow, then lift the cover away

from the battery compartment

3 Insert two AA batteries (included) into the battery compartment. Make

sure that the + and – symbols on the batteries align with the + and –
symbols in the battery compartment.

4 Close the battery compartment cover, then slide the cover in the

direction of the arrow to lock it in place.

Inserting a memory card

1 Open the memory card compartment at the bottom of the camera.
2 Insert the SD or SDHC memory card into the card slot with the metallic

part facing the back of the camera.

3 Close the compartment.

Note: To remove the card, gently push the card until it pops out. Carefully pull out the card, then close

the compartment.

Turning the power on and o

1 Press and hold until the Insignia startup image appears. The zoom

lens extends, and if sounds are turned on, a startup sound plays.

2 Press again to turn the camera o .

3