Labtec
®
SpinTM-55
Getting Started Guide
Guide de démarrage
Guía de inicio rápido
English Français Español
Thank you for purchasing Labtec® Spin™-55 computer speakers. Your Labtec speakers are quick to install, easy to
use and produce great sound.
Connecting the speakers
You can connect your speakers to your computer
soundcard, or to an external audio source, such as
a CD player, cassette tape deck, or radio. Connect
your speakers as shown below: Note: If your
soundcard has both a line level output and a
speaker output, use the line level output.
Adjusting volume for the
first time
• Open your soundcard’s mixer program. In
Windows you’ll find this program by doubleclicking the small speaker icon in the lower right
corner of the screen.
• Set your Labtec speaker volume control to its
center position.
• With a music CD playing, adjust the mixer’s
main volume to 2/3 or greater and center
balance. Close or minimize the mixer program.
• Now use the speaker volume control to adjust
the volume for your system.
Using headphones
You can plug most types of headphones into the headphone jack on the front of the main speaker. When you plug in
headphones, the speakers stop producing sound. To adjust the volume for your headphones, use the controls on the
front of the main speaker.
Troubleshooting
For problems with your computer, consult the user’s guide that came with it.
Speakers produce weak or no sound.
• Is the power light on? Make sure the speakers are connected to the power adapter and the power button is on.
• Is there output from the soundcard? Try connecting the speakers to an alternative audio source - for example, a
CD player, cassette tape deck, or radio. If there’s sound from the speakers, the problem is probably with your
soundcard. If no other sound source is available, try removing the plug from the soundcard and turning the
speaker to maximum volume. You should hear a hum or buzz when you touch the tip of the plug. If you do, the
speaker is ok, and you should check your soundcard setup.
• Are headphones plugged into the speaker? Sound is blocked whenever the headphones are plugged in. Try
removing them to restore sound to the speakers.
Español Français English
Green
vert
verde
English Français Español
One speaker doesn’t produce sound.
• Is the soundcard connection secure? Make sure the cable from the soundcard to the main speaker is properly
secured.
• Is the balance control centered?
Safety
For the safety of you and your equipment, always follow these precautions.
• Disconnect the power adapter if the power cord or plug becomes frayed or damaged, or if you suspect that your
speakers need repair.
• Use only the power adapter specifically designed for the Spin™-55s.
• Keep your speakers away from sources of heat, such as stoves, radiators, heat registers, and other similar
appliances.
• Keep your speakers away from sources of liquids, such as showers, bathtubs, and wash basins. Liquid could cause
electrical shock or an electrical fire.
• Protect your speakers from dampness.
• Follow these installation instructions before plugging your speakers into a wall socket.
WARNING: Electrical equipment may be hazardous if misused. An adult must always supervise operation of this
product by children. Do not allow anyone access to the interior of any electrical product, and do not permit children to
handle any cables.
Product Warranty
Limited Warranty. Labtec warrants that any hardware product accompanying this documentation shall be free from significant defects in material and
workmanship for a period of one (1) year from the date of purchase. Labtec's limited warranty is nontransferable and is limited to the original purchaser.
This warranty gives you specific legal rights, and you may also have other rights, which vary under local laws.
Remedies. Labtec’s entire liability and your exclusive remedy for any breach of warranty shall be, at Labtec’s option, to: (a) repair or replace the hardware,
provided that the hardware is returned to the point of purchase or such other place as Labtec may direct, with a copy of the sales receipt, or (b) refund the
price paid. Any replacement hardware will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. These
remedies are void if failure of the hardware has resulted from accident, abuse, or misapplication.
DISCLAIMER OF WARRANTY. THE WARRANTIES EXPRESSLY SET FORTH IN THIS AGREEMENT REPLACE ALL OTHER WARRANTIES. LABTEC AND ITS
SUPPLIERS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD-PARTY RIGHTS WITH RESPECT TO THE HARDWARE. NO LABTEC DEALER,
AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. Some jurisdictions do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
LIMITATION OF LIABILITY. IN NO EVENT WILL LABTEC OR ITS SUPPLIERS BE LIABLE FOR ANY COSTS OF PROCUREMENT OF SUBSTITUTE PRODUCTS OR
SERVICES, LOST PROFITS, LOSS OF INFORMATION OR DATA, OR ANY OTHER SPECIAL, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING
IN ANY WAY OUT OF THE SALE OF, USE OF, OR INABILITY TO USE ANY LABTEC PRODUCT OR SERVICE, EVEN IF LABTEC HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL LABTEC'S AND ITS SUPPLIERS’ TOTAL LIABILITY EXCEEDS THE ACTUAL MONEY PAID FOR THE
LABTEC PRODUCT OR SERVICE GIVING RISE TO THE LIABILITY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. The above limitations will not apply in case of personal injury where and to the extent
that applicable law requires such liability.
Loading...