Labnet ProBlot H0600A, ProBlot H600A-230V, ProBlot H1200A, ProBlot H1200A-230V User Manual

ProBlot Hybridization Oven
User manual
Lit M00505
H0600A
H600A-230V
H1200A
H1200A-230V
Rev 3 July 2019
CONTENTS OF THIS USERS MANUAL
Graphic
Symbols
page
1
Safety
Precautions
page
1 Introduction
page 2
Specifications
page
2
Unpacking
page
2
Installation
page 3
Stacking
Problot
Ovens
page
3
Controls
& Calibration
page
3
Operating Features Rocking Platform/Installation Care
page 4
page 5
and Maintenance Decontamination Troubleshooting Guide Technical Support/Service Accessories
page 6 page 6
page 6 page 7
GRAPHIC SYMBOLS Your Labnet Problot hybridization oven uses internationally accepted graphic symbols to help convey informat ion to the user and to call the users attention to important safety precautions and guides for using this eq uipment. Use of this p roduct in any manner
not specified by the manufacturer may impair the safety protection provided by the equipment and may result in physical damage and/or personal injury. Please read all operating instructions in this manual prior to use of this equipment.
Indicates that user should consult manual further description or disc ussion.
Indicates AC “Power On” Indicates “Heating”
Indicates “Degrees C entigrade” Indicates “Tempe rature
”Indicates Potent ial “Shock Haz ard” Indicates Protective “Earth ground”
SAFETY PRECAUTIONS
1. Although the Problot Hybridization system has been designed to minimize user exposure to radioactive materials, proper precautions must be taken when using radioactive material.
2. Always inspect the hybridization bottles, caps and seals before use. Do not use bottles, caps or seals that are cracked or chipped. Ca p seals should be replaced if they are severely deformed or discolored. Special attention should be paid to inspecting bottle r ims / threads.
3. DO NOT take bottles to temperatures higher than 70ºC without opening and retightening
the cap to relieve pressure build-up. Temperatures above 70ºC can cause breakage of hybridization bottles. If chamber temperatures rise above 70ºC when bottles ar e in use , DO NOT OPEN THE OVEN DOOR. Red uce the temperature setting to below 70ºC or turn the power off and allow sufficient time for the bottles to cool below 70ºC before opening the door.
INTRODUC TION This manual covers the specifications, operation and use of the Labnet series of
Problot Hybridization Ovens including Problot 6A and Problot 12A. Please pay special attention to the Safety Precautions section in this manual.
Problot Hybridization Ovens from Labnet International provide extremely stable temperature environments and smooth variable speed rotation that are ideal for blot hybridiz ation and blot washing activit ies.
Labnet’s Problot Hybridization Ovens use microprocessor controls and mechanical convection to maintain a stable temperature environment and to achieve fast chamber temperat ure recovery after a door opening. The oven interior is c onstructed from stainless steel for corrosion resistance. Problot rotisseries are easily removed from the oven and are adjustable fo r either horizontal or more vigorous angled blot washing. All oven doors have an integral glass window to allow observation of samples without opening the door and each door is fully thermal gasketed.
The Problot 6 and 12 include a drip pan for easy clean-up of accidental spills. Hybridization Bottles made of high quality borosilicate glass, which provides a high
level of protection from the 32P beta emissions are recommended for optimum Problot Oven performance.
SPECIFICATIONS
Chamber tem per atur e r ange Accuracy / Uniformity Rotisserie Speed Optional rocker speed Interior electrical outlet
Electric al R atings a nd Unit Siz e, Ext er ior Di m s ( WxDx H) Cham b er D im s (WxDxH) Problot 6A &12A
120V, 50/60Hz, 6 amps 483x445x495mm 368x279x343mm 220V, 50/60Hz, 3 amps
Ambient +5ºC to 80ºC +/-0.1ºC / +/-0.5ºC 4 to 20 rpm 8 to 40 rocks per minute 1 amp (on 120V Problot 6A, 12A models only)
Loading...
+ 8 hidden pages