Kuppersbusch EDIP6400.2 Instructions For Use And Installation
BEDIENUNGSANWEISUNG
mit Montageanweisungen
INSTRUCTIONS FOR USE
and installation
Lesen Sie unbedingt die Gebrauchsanleitung
und den Montageplan vor Aufstellung,
Installation sowie Inbetriebnahme.
Please read the users and installation
instructions carefully before installation
of the appliance and before starting to use it.
Service und Kundendienst
Telefon: 0209 – 401 631
Email: kundendienst@kueppersbusch.de
DE ES EN FR PT NL IT EL
EDIP6400.2
13
EN
Dear Customer,
Thank you for choosing this Küppersbusch product.
We ask you to read the instructions in this booklet very carefully as this will allow you to get the
best results from using it.
KEEP THE DOCUMENTATION OF THIS PRODUCT FOR FUTURE REFERENCE.
Always keep the instruction manual handy. If you lend the appliance to someone else give them
the manual as well!
The user manual is also available for download at www.kueppersbusch.de
Safety Instructions
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they are supervised by an adult or a person who is
responsible for their safety.
Do not let children play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
The electric system must be equipped with a means for
disconnection, with a contact separation in all poles that
provides full disconnection under overvoltage category III.
If a plug is used for the electric connection, then it must be
accessible after installation.
Anti-shock protection must be provided by the installation.
The air must not be discharge into a flue that is used for
exhausting fumes from appliances burning gas or other fuels.
The room must be provided with appropriate ventilation if the
extractor is going to be used at the same time as other food
processing equipment not using electrical power.
Do not flambé food under the hood.
CAUTION: Accessible parts may become hot when it is used
with cooking appliances.
When the extractor is working at the same time as other non-
electrical cooking equipment, the outlet air pressure must not
exceed 4 Pa (4 x 10
-5
bar).
14
EN
Before using the extractor for the first time, you must observe
the installation and connection instructions.
Never pull the cable to unplug the extractor.
Do not switch on the extractor if the electricity cable is worn
or has cuts or if there are signs of deterioration around the
control panel.
If the extractor stops working or functions abnormally, unplug
it from the mains and advise the technical service.
Do not leave gas burning without a pan above it under the
hood.
Do not allow grease to accumulate in any part of the
extractor, especially in the filter as this COULD PRODUCE A
FIRE RISK!
Before installing the extractor consult local rules and
regulations in force with respect to current standards on air
and fumes.
Before connecting the extractor to the mains, check that both
the voltage and the frequency conform to that shown on the
characteristics label of the extractor located inside it.
We recommend the use of gloves and caution when cleaning
the inside of the extractor.
Your extractor is designed for domestic use and only for
expelling and purifying gases arising from food preparation.
Its use for any other purpose must be at your own
responsibility and may be dangerous.
This device includes a security component that cuts it off the
power when you remove the main filter.
You should contact the nearest Qualified Technical
Assistance Service for any repairs always using original
spare parts. Repairs and modifications carried out by others
could damage the apparatus or cause it to malfunction, and
risking your safety. The manufacturer cannot be held liable
for inappropriate use of the apparatus.
15
EN
Description of the appliance (Fig. 1-4)
A Motor push control that allow 3
speeds to be selected
Low
High
Intensive
B Light push control that allow 3
positions to be selected
On
0 Off
A Automatic
C Lighting by means of lamps
D Filters located over cooking area,
easily withdrawn for cleaning
E Extractable group that allows a
greater gas capture area
F Possibility of incorporating activated
charcoal filter
G-H Anti return tabs to be located in the
outlet mouth, locating their ends in the holes
provided.
Instructions for use
By pressing the button shown in the figure 1,
you will be able to control the functions of the
extractor
Two achieve better extraction, we recommend
switching on the extractor a few minutes
before starting to cook (3 - 5 minutes) so that
the air flow is continuous and stable when
extracting the fumes.
Likewise, keep the extractor switched on for a
few minutes when cooking is complete to allow
all fumes and odours to be expelled.
Cleaning and maintenance
Before carrying out any cleaning or
maintenance activities, ensure that the
extractor is disconnected from the mains.
To carry out cleaning and maintenance, follow
the Safety Instructions.
There is a fire risk if cleaning is not carried out
in accordance with the instructions.
Filter cleaning
To withdraw the filters from their locations
release the anchoring points. Clean the filter,
either by putting it in the dishwasher (see
notes) or leaving it standing in hot water to
simplify the removal of grease or, if wished, by
means of special sprays (protecting the non
metallic parts). Once clean, leave it to dry.
Attention: the cooker hood will not work until
the main filter was reinstalled.
Notes: cleaning in the dishwasher with
aggressive detergents may blacken the
surface of metallic parts, without this affecting
its gas retaining properties.
N.B. The filter must be cleaned at least once a
month depending on how often the extractor is
used. It must be remembered that grease is
deposited in the extractor when cooking,
whether it is switched on or not.
Cleaning of the extractor body
The use of warm (40ºC approx.) soapy water
is recommended. A cloth moistened in this
water is used for cleaning the extractor, paying
special attention to the grids. Afterwards, dry it
using a lint-free cloth.
Note:
Never use metallic scouring pads or
abrasive products that could damage
the surface.
Do not use scrapers with metallic
surfaces such as knives, scissors etc.
Activated charcoal filter
To install the charcoal filter, the motor
anchorage is made to coincide with
the anchor points of the activated
charcoal filter and turn it clockwise.
The carbon filter lasts from three to
six months depending on the
particular conditions of use.
The activated carbon filter can neither
be washed nor regenerated. Once it
is exhausted, it must be changed.
To replace exhausted filters with new
ones, withdraw the old one in the
reverse order to that of installation.
Tecnical Information (Fig. 4)
Dimensions: Width = 600 mm
Depth = 300 mm
Loading...