KYORITSU 8243 User Manual
65.3
Cable Connector
23.1
43.1
To Adapter (DMM)
Unit: mm
<Printer Adapter>
<Printer Cable>
To Printer
1100±30
Printer
Power switch
Cable
Adapter
Main unit
DMM
On-line switch
Printers serial port (9 pins)
<Side of DMM>
<Side of Printer>
MODEL 8246
INSTRUCTION
MANUAL
■Precautions before Use
● The adapter and cable are dedicated for KYORITSU digital multimeters (DMM) and
cannot be used with other products.
● To ensure safety, turn off the DMM and printer, remove the test leads from the
DMM, and then connect the adapter and cable to the DMM and printer.
● Follow the precautions in the instruction manual for both the DMM and printer.
■Dimensional drawing
MODEL 8243
Printer Adapter and Cable
Read this manual in order to use these instruments properly.
Keep this document in a safe place for future reference.
■Connection
Remove the Blank cover on the back of the DMM to attach the adapter.
Infrared (IR) Adapter and Printer cable
■Output to Printer
● Printer settings
Input: serial
Baud rate: 9600 bps
Note: For detailed settings, refer to the instruction manual of the printer.
● Printing real-time measured value
The measured value on the display can
<Printing Separately>
Press the MEMORY key of the DMM. The MEM symbol appears on the display.
1)
2) Press the PRINT (SELECT) Key.
3) The data is printed everytime the PRINT (SELECT) Key is pressed.
<Consecutive printing>
Press the MEMORY key of the DMM. The MEM symbol appears on the display.
1)
2) Keep the PRINT (SELECT) key depressed for at least one second.
The
3) To cancel printing, keep the MEMORY key depressed for at least one second.
The MEM symbol disappears on the display.
● Printing data in manual-mode (SAVE) memory
1)
2) Press the PRINT (SELECT) key.
3) Press the SAVE (HOLD) key.
All the data in manual-mode
● Printing data in logging-mode memory
1)
2) Press the PRINT (SELECT) key.
3) Press the LOG (MIN/MAX) key.
A ll the data in loggi ng-mode memor y are printed. Then the MEM symbol
8-08 92-1984
data is printed at the specified time intervals.
Press the MEMORY key of the DMM. The MEM symbol appears on the display.
(SAVE) memory are printed, then the MEM symbol
disappears from the display.
Press the MEMORY key of the DMM. The MEM symbol appears on the display.
disappears on the display.
be printed.
Loading...