Kyocera Urbano V01 User Guide

Basic Manual

Contents

Getting Ready

Basic Operation

au Disaster Countermeasure

Safety Precautions

Appendix

Four selectable Home screens

Tap " (Change home)" on Home screen (Standard home) to select the suitable Home screen.

	Smartphone type					Feature phone type

		Standard home
		A default setting
	Home app for a user to be used to
ii	dealing with smartphone.

Entry Home

Home app for a user to be used to dealing with feature phone.

Simple phone type

(Simple menu)

Home app for a user to be used to dealing with simple phone.

Simple display type

					Here's
					more on
					settings!
		au Basic Home
Home app for a user to simply display					P.18
only common apps.

1

Preface

Thank you for buying the "URBANO V01" (simply called the "product" or "main unit" from here on).

Before using the product, be sure to read the "Basic Manual" (this manual) to ensure correct use.

After you have finished reading this PDF and the printed manuals, be sure to store them in safe places so that you can retrieve them whenever needed. If you lose the printed manuals (Accessories), contact an au shop or Customer Service Center.

About Operating Instructions

■"Setting Guide"/"Basic Manual" (This manual)

Handles only basic operations for main features.

For detailed descriptions on various functions, refer to the "Instruction Manual" app installed on the product or "(Full Instruction Manual)" (Japanese) available on the au homepage. http://www.au.kddi.com/support/mobile/guide/manual/

•Company names and product names referred to in this manual are trademarks or registered trademarks of respective companies.

■"Instruction Manual" App

You can use the "Instruction Manual" app on the product to confirm detailed operational procedures.

Certain functions can be directly activated from the application screens on which their operations are described.

From the Home screen, [Apps]→[Basic Manual]

•When you activate for the first time, follow the onscreen instructions to download and install app.

■Downloading Manuals

You can download the "Basic Manual" (this PDF manual),

the " (Instruction Manual)" (Accessory) (Japanese) and " (Full Instruction

Manual)" (Japanese) in PDF format from the au homepage.

Download URL: http://www.au.kddi.com/support/mobile/guide/manual/

Safety Precautions

Before you start using the product, make sure to read the "Safety Precautions" to ensure correct use.

Before you assume that the product is malfunctioning, check for possible remedies in the following au Customer Support site of au homepage: http://www.au.kddi.com/support/mobile/trouble/repair

2

When using the product

•Communication is not possible even inside the service area in places where the signal does not reach (e.g. tunnels and basements). Also, communication is sometimes not possible in poor reception areas. Communication is sometimes interrupted if you move into a poor reception areas during communications.

•Since this product uses radio waves, the possibility of communication intercepts by third parties cannot be eliminated. (Though LTE/WiMAX 2+/GSM/UMTS system has highly secure confidential communication features.)

•When connecting to emergency services in Japan, use au VoLTE (LTE network). You cannot connect through 3G (circuit switching network).

•This product is compatible with the international roaming service. Each network service described in this manual varies depending on the area and service content.

•Since this product is a radio station under the Radio Law, you may be asked to temporarily submit the product for inspection in accordance with the Radio Law.

•IMEI information of your cell phone is automatically sent to KDDI CORPORATION for maintenance and monitoring operational status of your cell phone.

•The battery is built into the product and it is not user replaceable. For the exchanging battery, contact an au shop or Customer Service Center.

•Take care not to inconvenience people around you when you use the product in a public place.

•Before you start using the product overseas, check the relevant laws and regulations of the country/region you visit.

•When the product is used by a child, parents or guardians should thoroughly read the "Basic Manual" (this manual) and teach the child how to use it.

Cell Phone Etiquette

■Use of the product is not allowed in the following places!

•Do not use a cell phone while driving a car or riding a motorbike or bicycle. It might cause a traffic accident. Use of a cell phone while driving a car or motorbike is prohibited by law. Use of a cell phone while riding a bicycle may be punishable by some regulations.

•Use of cell phones on board is restricted. Follow the instructions of each airline.

■Pay attention to the place of use and volume of your voice!

•To prevent ringtone from bothering other people, not only refrain from making a call but also power off or use Silent mode at a movie theater, theater, museum, library, etc.

3

•In a city area, use in a place where you do not bother people walking.

•It is extremely dangerous to walk while looking at the screen of the cell phone. Do not make calls or operate a cell phone while walking or by stopping suddenly.

•Move to a place where you do not disturb others while you are in shinkansen, a hotel lobby, etc.

•Be careful not to be loud while talking.

•Ask permission if you take photos with your cell phone camera.

■Consider people around you!

•There may be a person with a cardiac pacemaker nearby at a place filled with people such as in a crowded train. Set "Airplane mode" or turn off beforehand.

•When a medical institution has laid down designated areas where use of the product is prohibited or is not allowed to be brought in, abide by the instructions of that medical institution.

List of Packaged Items

Before your start using the product, make sure that you have all the following packaged with the product.

Quick Charge Desktop Holder (with AC adapter) (KYV31PUA)

* The Quick Charge Desktop Holder (with AC adapter) (KYV31PUA) is

not waterproof/dustproof.

Main unit

4

IC Card Tray Ejecting Tool for URBANO V01 (sample)

●(Instruction Manual) (Japanese)

●(Setting Guide) (Japanese)

●(Warranty for the main unit) (Japanese)

●AC (Warranty for Quick Charge Desktop Holder (with AC adapter)) (Japanese)

The following items are not included in the package.

microSD memory card	microUSB cable
Earphones

The illustrations of cell phone in the manual are used only for explaining. They may differ from the actual product.

The battery is built into the product.

Regarding notations used in this document

■Note on key illustrations

In this manual, keys are represented by simplified illustrations as shown below.

k F r(Volume UP key) l(Volume DOWN key)

C H N

■Description of Operations for Selecting Item/Icon/Key etc.

The notations used for operation procedures in this manual are as follows.

Tapping is to select a key or icon displayed on the screen by lightly tapping it with your finger.

5

Description	Explanation
On the Home screen	Tap " (Phone)" at the bottom of the
→[Phone]→[1][4]	Home screen. And tap " ", " ",
[1]→[Call]	" ", then tap " " (Outgoing call)
	at the end.
In sleep mode, F	In sleep mode, press F.

■Notes on illustrations/Screenshots

Screen illustrations shown in this manual may look different from the actual screens.

In some cases, minor details or a part of a screen may be omitted.

			Actual screen			Notations used in
						this manual
In this manual,
some icons on
a screen are
omitted.

Operations from the vertical display are mainly described. Menu items/icons/keys on a screen may be different from the ones in the horizontal display.

Menu items/layers/icons may be different depending on functions, conditions, etc.

In this manual, screenshots for body color "Royal blue" are provided as examples.

In this manual, "microSD™ memory card", "microSDHC™ memory card" and "microSDXC™ memory card" are abbreviated as "microSD memory card" or "microSD".

All of the indicated amounts exclude tax unless otherwise specified.

6

Contents
Four selectable Home screens........................................	ii
Preface............................................................................	2
About Operating Instructions .........................................	2
Safety Precautions..........................................................	2
When using the product .................................................	3
Cell Phone Etiquette .......................................................	3
List of Packaged Items ...................................................	4
Regarding notations used in this document...................	5
Contents .................................................	7
Getting Ready.........................................	8
Names and functions of parts ........................................	8
Attaching/Removing au Nano IC Card 04 ....................	11
Attaching/Removing microSD memory card ................	13
Charging.......................................................................	15
Turning the power on/off ...............................................	18
Basic Operation ...................................	20
Using Home screen......................................................	20
Switching the home app...............................................	21
Using the Apps list .......................................................	23
Using the Simple menu ................................................	23
Monitoring the product's status ....................................	23
Checking your own phone number ..............................	24
Setting Silent mode.......................................................	24

Setting Airplane mode ..................................................	25
Making a call ................................................................	25
Receiving a call ............................................................	25
Displaying menu...........................................................	25

..............au Disaster Countermeasure	26
Using Disaster Message Board....................................	26
Using Emergency Rapid Mail.......................................	26
Using Disaster Voice Messaging Service.....................	28
			Contents
Safety Precautions...............................	30
Using Disaster information ...........................................	29
Exemptions ...................................................................	30
Safety Precautions (Observe Strictly)...........................	30
Handling precautions ...................................................	41
Notes on waterproof, dustproof and shock-resistant
properties .....................................................................	49
Notes on using Bluetooth®/Wireless LAN (Wi-Fi®)
function .........................................................................	56
Notes on packet communication charge .....................	58
Notes on applications...................................................	58
Appendix...............................................	59
Introduction of related accessories ..............................	59
Troubleshooting ............................................................	60
Updating Software or OS..............................................	61
After-sales service ........................................................	62
Main specifications.......................................................	65
Specific Absorption Rate of Mobile Phone...................	67
Intellectual property rights............................................	68	7

Ready Getting

8

Getting Ready

Names and functions of parts

External connection terminal

Used for connecting Common AC Adapter 05 (sold separately), microUSB cable 01 (sold separately), etc.

Earphone microphone terminalmicroSD memory card slot

au Nano IC Card 04 slotCard slot cover

External connection terminal coverIn camera (lens)

Receiver

With Smart sonic receiver ( P.10), hear the other party's voice on call, play sound of answer memo, etc.

Infrared port

Send or receive data via infrared communication.

Proximity sensor/Light sensor

Proximity sensor prevents from erroneous operation of touch panel during a call.

Light sensor detects the ambient light level to adjust the

display brightness.

Incoming (Charging) light

Lights in red while charging.

Blinks according to the settings for incoming call/mail.

Display

Microphone

Transmits your voice to the other party during a call. Or used for recording the voice sound. Take care not to cover the microphone with your fingers during a call or recording a video.

C BACK key

Return to the previous screen.

H HOME key

Display the Home screen or use for canceling sleep mode. Long-touch to activate "Google".

N RECENTS key

Display the recently-used apps.

TV antenna

Extend to watch TV (1Seg). Even when the antenna is extended during a call or while using the browser, calling or data communication is not affected.

lr Volume DOWN/UP key

Adjusts sound volume. Press and hold l(Volume DOWN key) to set "Silent mode". Press and hold r (Volume UP key) during sleep mode to activate "Talk now".

F Power key

Power ON/OFF, activate/deactivate Sleep mode, etc.

kCamera key

Activate camera or use as autofocus/shutter of still

image shooting.

Strap eyelet

Built-in GPS/Bluetooth®/Wi-Fi® antenna*

Built-in Wi-Fi® antenna*

Built-in sub antenna*

Speaker

Ringtone or alarm sound can be heard from here.

Ready Getting

9

Ready Getting

Out camera (lens)Charging terminal

It is a terminal for using Quick Charge Desktop Holder (with AC adapter) (KYV31PUA) when charging.

Photo light/Simple light mark

Hold the mark over the reader/writer when using OsaifuKeitai®. Send or receive data via IC transmission.

NFC (FeliCa compatible) antenna*

Built-in WiMAX 2+ antenna*

Built-in main antenna*

*Do not cover antennas with your hand or put stickers etc. It might affect communication quality.

The back cover of the product is not removal. Removing the back cover with force may cause damage or malfunction.

The battery is built into the product and it is not user

replaceable. For force shutdown and restarting, see "Force shut down and restarting" ( P.19).

About Smart sonic receiver

The product is equipped with Smart Sonic Receiver, which transmits sound by vibrating the display. Although there is not receiver hole, you can use as usual.

■Touching to your ear

Touch receiver part of the product to your ear as shown below. By covering your ear to shut out surrounding noise, voice sound will be heard more easily. Move position of the product up/down/left/right to adjust according to your hearing condition or an immediate environment.

Receiver

Microphone

10

Take care not to cover the microphone with your fingers during a call.

When the earphones (sold separately) are connected, voice sound can be switched to the one via earphones not using Smart sonic receiver.

Do not put stickers, etc. on the display. May make receiver sound to be heard hard.

There may be differences in the hearing easiness among individuals.

Depending on environment, the hearing effect differs.

Attaching/Removing au Nano IC Card 04

Before attaching/removing the au Nano IC Card 04, make sure to turn the power off.

The product is compatible with au Nano IC Card 04 only. You cannot use the product with an IC card other than au Nano IC Card 04.

au Nano IC Card 04

IC (metal) part

Note the following points, otherwise handling the au Nano IC Card 04 tray or the product may cause malfunction or damage.

•Do not touch the IC (metal) part of the au Nano IC Card 04 or the IC card terminal inside the product.

•Insert in the correct direction.

•Do not use force to attach or remove.

Before removing au Nano IC Card 04, be sure to remove a power plug of specified AC adapter etc. from the product.

When the au Nano IC Card 04 is not attached properly or the au Nano IC Card 04 is abnormal, an error message appears.

Do not lose the au Nano IC Card 04 after it has been removed.

Ready Getting

11

Ready Getting

Attaching au Nano IC Card 04

•When installing au Nano IC Card 04, be sure to use the supplied IC Card Tray Ejecting Tool for URBANO V01 (sample).

1Turn the power off and open the card slot cover

2Hook the IC Card Tray Ejecting Tool for URBANO V01 (sample) on the edge of the tray and pull it out

IC Card Tray Ejecting Tool for

URBANO V01 (sample)

Tray

3Check the orientation of the notch of the au Nano IC Card 04 and put it on the tray. Then insert the tray straight into the au Nano IC Card 04 slot (upper)

After the tray is inserted, hook the IC Card Tray Ejecting Tool for URBANO V01 (sample) on the edge of the tray and press it all the way.

•Take care so that the au Nano IC Card 04 does not get over the edge of the tray. Do not apply excessive force and insert it all the way straight into the slot. If the tray does not fit into the slot, do not press it with force. Pull the tray out and insert it again with the front edge raised. If the au Nano IC Card 04 gets over the tray, the product might not recognize the au Nano IC Card 04.

au Nano IC Card 04 slot (upper)

microSD memory card slot (lower)

Notch

Edge of tray

12	4 Close the card slot cover

Removing au Nano IC Card 04

•When removing au Nano IC Card 04, be sure to use the supplied IC Card Tray Ejecting Tool for URBANO V01 (sample).

•Before removing the au Nano IC Card 04, make sure to remove a microSD memory card.

1Turn the power off and open the card slot cover

2Hook the IC Card Tray Ejecting Tool for URBANO V01 (sample) on the edge of the tray and pull it out

IC Card Tray Ejecting Tool for URBANO V01 (sample)

Tray

3Remove au Nano IC Card 04, then insert the tray straight into the au Nano IC Card 04 slot

(upper)

au Nano IC Card 04 slot (upper)

microSD memory card slot (lower)

Notch

4 Close the card slot cover

Attaching/Removing microSD memory card

Attaching microSD memory card

1 Open the card slot cover

Ready Getting

13

2Confirm the direction of the microSD memory card and slowly insert it into the slot until it clicks

Insert a microSD memory card until you hear a click and confirm it is locked. Releasing the microSD memory card before it is locked may cause it to popout.

	au Nano IC Card
	04 slot (upper)
Getting	microSD memory
Ready	card slot (lower)

With the side of the microSD logo facing up

3Close the card slot cover

Insert a microSD memory card with the right side up in the appropriate direction. Inserting a microSD memory card forcefully into the slot could result in failure to remove the microSD memory card or damage to the microSD memory card.

14

Removing microSD memory card

1Apps list→[Settings]→[Storage]→[Unmount SD card]→[OK]

2 Open the card slot cover

3Slowly push the microSD memory card toward the slot until it clicks

When a click sound is heard, pull your finger with the microSD memory card touched. Keep putting your finger on the microSD memory card until it comes out a little. Releasing the microSD memory card when pushed hard may cause it to pop-out.

4Slowly remove the microSD memory card

Slowly pull the microSD memory card straight out. Some microSD memory cards cannot be unlocked and do not come out smoothly. In such case, pull it out with your finger.

5Close the card slot cover

Do not touch the terminal part of microSD memory card.

Do not remove the microSD memory card forcefully. It may result in damage to the microSD memory card or the data loss.

The microSD memory card may be warm after a long time use. It is normal.

When removing the microSD memory card, be sure to unmount to prevent data from loss (deletion).

Charging

When you purchase your product, the internal battery is not fully charged. Make sure to charge the battery pack before use. When the charging light in red turns off, charging is complete.

The product may become warm while charging, depending on the situation, but this is not abnormal.

Charging while using camera etc. may take longer.

When you operate the product with the specified charger connected, the product may repeat short-time charging/ discharging resulting in short battery life.

When temperature of environment or the product becomes extremely high or low, charging may be stopped. Try to charge the battery as far as possible at room temperature.

If the charging light blinks in red, check if the product is correctly connected. If the light keeps blinking, stop charging and then contact an au shop or Keitai Guarantee Service Center.

Clean the charging terminal with dry cotton swabs etc. When it is dirty, the battery may not be charged normally.

Firmly close the external connection terminal cover after charging to prevent water or dust from getting in. And do not pull strongly or twist the cover.

If charging is stopped while the charging light is still turned on, the battery may not be fully charged even with "" (Full) displayed. In that case, available time will be short.

When charging with Quick Charge Desktop Holder (with AC adapter) (KYV31PUA), do not use the external connection terminal to charge. Doing so may not charge properly, and may cause a malfunction.

Do not allow conductive foreign objects (metal fragments, pencil leads, etc.) to come into contact with or get inside the connection terminals.

Ready Getting

15

Ready Getting

Charging with the Quick Charge Desktop Holder (with AC adapter) (KYV31PUA)

Using supplied Quick Charge Desktop Holder (with AC adapter) (KYV31PUA) enables to charge more quickly than usual.

1Insert the power plug of AC Adapter for the Quick Charge Desktop Holder (with AC

adapter) (KYV31PUA) into an outlet (100 VAC to 240 VAC)

2Install the product into the Quick Charge Desktop Holder (with AC adapter) (KYV31PUA)

Check that the charging light on the product lights in red. When charging ends, the charging light turns off.

AC Adapter

Quick Charge Desktop

Holder (KYV31PUA)

3When charging ends, remove the product from Quick Charge Desktop Holder (with AC adapter) (KYV31PUA)

4Unplug the power plug of AC Adapter for the Quick Charge Desktop Holder (with AC adapter) (KYV31PUA) from the outlet

16

Charging with specified AC Adapter (sold separately)/DC Adapter (sold separately)

Charging with Common AC Adapter 05 (sold separately)/Common DC Adapter 03 (sold separately) is explained. For information on the specified Common AC Adapter (sold separately)/Common DC Adapter (sold separately), see "Introduction of related accessories" ( P.59).

1Open the external connection terminal cover of the product

2Check the orientation of the microUSB plug of Common AC Adapter 05 (sold separately)/Common DC Adapter 03 (sold separately) and insert it straight into the external connection terminal

With the projection facing

down	Common AC Adapter 05 (sold separately)/
	Common DC Adapter 03 (sold separately)

3Insert the power plug of Common AC Adapter 05 (sold separately) into an outlet (100 VAC to 240 VAC)/Insert the plug of Common DC Adapter 03 (sold separately) into a cigarette lighter socket

Check that the charging light on the product lights in red. When the battery power turns on, "" appears on the status bar.

When charging ends, the charging light turns off.

Ready Getting

Common AC Adapter 05	Common DC Adapter 03
(sold separately)	(sold separately)

4When charging ends, pull out the microUSB plug of Common AC Adapter 05 (sold separately)/Common DC Adapter 03 (sold separately) straight from the external connection terminal

17

5 Close the external connection terminal cover

6 Pull out the power plug of Common AC Adapter 05 (sold separately) from the outlet/ Pull out the plug of Common DC Adapter 03 (sold separately) from the cigarette lighter socket

			Note that applying unnecessary force with the external
			connection terminal connected to the external device
	Getting
			might cause damage.
			When charging starts with the battery empty, the charging
	Ready		light may not light immediately. But charging has started.

Turning the power on/off

Turning the power on

1Press and hold Funtil the incoming light turns on

When the start screen appears, disable security ( P.19).

•The first time the product turns ON, the initial settings such as "au (au Easy Setting)" activate. Make the settings as required. If you press

Ctwice to display the Home screen, you can change the language ( P.19).

18

■Disabling security on the start screen

When the start screen appears, disable security as follows.

•The background on Home screen varies depending on body colors.

1Slide ""

The home screen appears ( P.20).

Start screen

While logos are displayed after the power is on, initial settings for touch panel are in process. Do not touch the screen. The touch panel may not work properly.

"au (au Easy Setting)" can be set up later even though it is skipped.

If the charging light blinks in yellow when you turn the power on, the remaining battery is not sufficient for activating the product. Charge the battery before use.

If missed calls or new arrival mails exist, app icons appear on the start screen. Tap an icon to disable security and activate the corresponding app.

When "Set shortcuts" is set, slide a shortcut app on the start screen and the app activates.

Turning the power off

1 F(press and hold for at least one second)

2 "Power off"→"OK"

Forcing shutdown and restarting

Force shutdown and restart the product when the screen freezes or the power cannot be turned off.

1F(press and hold for at least 11 seconds)

If the product is forced shutdown and restarted, unsaved data will be erased. Do not force shutdown except when the product becomes inoperative.

Switching to English display

1Home screen→[ ( (Apps))] →[ (Settings)]→[ (Language & input)]→[ (Language)]→"English"

Ready Getting

19

Basic Operation

Using Home screen

When you purchase the product, home app on Home screen is set to "Standard home". Also, home app can be switched ( P.21).

The Home screen of Standard home consists of multiple screens. Slide/flick right or left to switch them.

Also, press Hto go to the main Home screen of the selected home app.

	Status bar
Basic	(Weather) widget
	Quick launch area
Operation	Shortcuts/Folders
						Home screen
					(Standard home)
20

In this manual, the operations on Home screen of "Standard home" is provided as examples.

Using (Weather) widget

Check weather information.

1Home screen→Tap (Weather) widget

(Weather) widget screen appears.

•The area selection screen is displayed by default. Select an area.

2Check the details of the weather on (Weather) widget screen

Tap → [+] on (Weather) widget screen to check weather information on other areas.

Switching the home app

Switch home app of the product.

1Home screen→[Change home]

Change home screen appears.

2Standard home P.20 "Using Home screen" Entry Home P.21 "Using Entry Home"

P.22 "Using

(Simple menu)	(Easy menu)"
au Basic Home	P.22 "Using au Basic Home"

Alternatively, to switch home app, the Home screen → [Apps] → [Setting] → [Change home] → Select home apps to switch → [OK].

Using Entry Home

This is home app with the screen looked like a conventional cell phone to use a smartphone at ease even for the firsttime user.

1Change Home screen → [Entry Home] → [OK]

Standby screen of Entry Home appears.

Date

Pedometer

When you purchase your product, the pedometer is set to "OFF". Set pedometer to "ON".

Notification

Shortcut keyApp icon

Menu icon

Standby screen of Entry Home

To restore the Home screen from Entry Home

to "Standard home", standby screen of Entry Home→[Menu]→[Setting]→[Change home]→[OK].

Operation Basic

21