Get started
All you need to know to get going.
Welcome!
Sprint is committed to developing technologies that give you the ability to get what you want when you want it, faster than ever before. This booklet introduces you to the basics of getting started with Sprint and your new SANYO Vero™ by KYOCERA.
Only on the Now Network.TM
©2010 Sprint. SPRINT and the logo are trademarks of Sprint. Other marks are the property of their respective owners. “SANYO” is a registered trademark of SANYO Electric Co., Ltd. and is used under license. KYOCERA is a registered trademark of Kyocera Corporation. Kyocera manufactures and markets the SANYO line of wireless products.
Get Your Phone Ready
Insert the Battery
1.Insert the battery into the battery compartment, making sure the connectors align, and gently press it down.
2.Position the battery cover and slide it upward until it snaps into place.
Charge the Battery
1.Plug the phone charger into an electrical outlet.
2.Plug the other end of the charger into the charger/accessory jack located on the lower left side of the phone.
Turn the Phone On
• Press 
.
Switch to Spanish Menus (optional)
1.Press 
> Settings > Others > Language.
2.Highlight Español and press 
.
Activate Your Phone
Activate Your Phone
•If you purchased your phone at a Sprint Store, it is probably activated and ready to use.
•If you received your phone in the mail, and it is for a new Sprint account or a new line of service, your phone is designed to activate automatically. To confirm your activation, make a phone call.
•If you received your phone in the mail and it is going to be activated on an existing number on your account (you’re swapping phones), you can activate on your computer online or directly on your phone.
Activate on your computer:
b Go to sprint.com/activate and follow the instructions.
Activate on your phone:
Note: You will need your Sprint PIN to use this activation method.
1.Turn on your new phone. (Make sure the old one is turned off.) Your phone will attempt Hands-Free Activation automatically.
2.Press ACTIVATE (left softkey) to override auto-activation and start the manual activation wizard.
Note: If you don’t override Hands-Free Activation, your phone will attempt to auto-activate five times, and then the manual activation wizard will start automatically.
Make Your First Call
3.Complete each screen of the wizard and press NEXT (left softkey) to advance through the screens.
4.Continue until you get to a confirmation screen telling you that your phone is now
active, and then press 
to return to your phone’s main menu.
When you have finished, make a phone call to confirm your activation. If your phone is still not activated, contact Sprint Customer Service at 1-888-211-4727 for assistance.
Make Your First Phone Call
1.Enter a phone number using your keypad. (If you make a mistake while dialing, press 
to erase.)
2.Press 
.
3.When you’re finished, press 
.
Loading...