Index ....................................................................................................................................... 173
TOC x
Get Started
This section gives you all the information you need to set up your device and the service the first
time.
Your Device at a Glance
Set Up Your Device
Complete the Setup Application
Set Up Visual Voicemail
Mobile ID
Getting Help
Your Device at a Glance
Get Started 1
Set Up Your Device
You must first install and charge the battery to begin setting up your device.
1. Install the battery.
Turn the battery cover lock counter-clockwise to the unlocked position ().
Insert your thumb- or fingernail into the slit () and then pull out the battery cover
().
Insert the battery, contacts end first, and gently press into place ().
Replace the cover, making sure all the locking tabs of the cover are seated and there
are no gaps. ().
Get Started 2
Turn the battery cover lock clockwise to the locked position ().
2. Charge your battery.
Open the cover of the charger/accessory jack.
Plug the smaller end of the micro-USB cable into the device‟s charger/accessory jack.
Plug the other end of the USB cable into the charger, and then plug the charger into
an electrical outlet.
Note: Your device‟s battery should have enough charge for the device to turn on and find a
signal, run the setup application, set up voicemail, and make a call. You should fully
charge the battery as soon as possible.
3. Press and hold the Power button to turn your device on.
If your device is activated, it will turn on and search for service.
If your device is not yet activated, see the Activation section of your Get Started
Guide for more information.
Complete the Setup Application
Once your device has been turned on and activated, you will see a Welcome message. You can
then complete the Setup application.
Get Started 3
1. Touch the Android icon to get started. To skip any section, touch Next or Skip.
2. Set up your GoogleTM options. Follow the instructions to complete each step.
View a tutorial: Touch Begin to see a brief tutorial on getting started.
Set up your Google Account: Complete the steps to create or sign in to your
Google account.
Use Google Location: Touch the check marks to select your Google location
options.
Back up data: Choose whether or not to back up data with your Google account.
3. Touch Finish setup to complete the Google setup process. You will see a Setup accounts page.
4. Touch any of the services listed and follow the prompts to set up additional accounts.
These may include: Email, Picasa, and YouTube.
For each account you set up, you will need your account sign-in information and
5. Touch OK to view a video tutorial, or touch Skip to finish setup and go to the home
screen.
Note: You do not need to sign up for a Google account to use your device. However, to
download applications from Google Play or to use Gmail, you must link your device to a
Google account.
Set Up Visual Voicemail
Setting up Visual Voicemail follows many of the same procedures as setting up traditional
voicemail. You should set up your voicemail and personal greeting as soon as your phone is
activated. Your phone automatically transfers all unanswered calls to your voicemail, even if
your phone is in use or turned off.
Note: To set up your traditional voicemail box, see Voicemail (Traditional).
1. Press
Home
, and touch >
Voicemail
.
2. Touch Personalize now and follow the system prompts to:
Create a password (part of standard voicemail).
Record your name announcement.
Record your greeting.
Get Started 4
3. When prompted to enter information, touch Dialpad to bring up the onscreen dialpad to
enter your numeric responses.
Important: Voicemail Password – Boost Mobile strongly recommends that you create a
password when setting up your voicemail to protect against unauthorized access.
Without a password, anyone who has access to your phone is able to access
your voicemail messages.
4. Once you have completed the setup process, return to the voicemail page (see step 1).
5. Touch the Welcome to Voicemail message on the screen to play a brief explanation of
the voicemail services.
Mobile ID
Once your device is activated, you will be prompted to install the Mobile ID pack. ID Packs are
bundles of applications, ringtones, wallpapers, settings, and more. ID Packs are installed using
an application called Mobile ID.
You can install as many as five ID Packs at any one time in addition to the default My ID Pack.
You can easily switch from one ID Pack to another without losing any applications already
installed.
Installing Additional ID Pack
Switching ID Packs
Installing Additional ID Pack
Note: Your device must be activated, your battery should be fully charged, and you should be
in a network coverage area before you install an ID Pack.
1. Press
turn on the display and then flick to unlock the screen.).
Home
, and touch . (If your screen is locked, press the
Power
button to
Get Started 5
2. Touch Get NewID Packs on the Choose your ID screen.
3. Touch an ID Pack on the Get New ID Packs screen.
4. Read the information screen for a description of the ID Pack and touch Install.
5. Read the Terms & Conditions and touch Agree to begin the download.
6. Wait for the download to finish and the ID Pack will then begin installation automatically.
- or Touch Continue to continue using your device. When the notification icon appears, slide
the status bar down, and touch ID ready to install to complete the installation.
Switching ID Packs
1. Press Home, and touch .
2. Touch an ID Pack to replace your current pack.
- or Touch Get NewID Packs to install a new ID Pack and follow steps 3–6 of Installing
Additional ID Pack.
Note: Certain features of Mobile ID are subject to change. For the most up-to-date information
about using Mobile ID, please visit boostmobile.com.
Getting Help
Managing Your Account
You can go to „My Account‟ on boostmobile.com to view your account information, recharge
your account, or to make account changes. To log into „My Account‟, you will need your 7-digit
phone number and the Account PIN number you set up at activation. Or from your phone,
simply press Home > , and touch BoostZone to access various self-service tools.
From Your Phone
Dial #225 (#BAL) to check account balance.
Dial #233 (#ADD) to make a payment.
Dial #611 to launch BoostZone or call Boost Customer Care (depending on your
You can get up to three pieces of information per call, and the operator can automatically
connect your call at no additional charge. Press Home and touch , and then touch
.
Operator Services
Operator Services provides assistance when placing collect calls or when placing calls billed to
a local telephone calling card or third party. Press Home, and touch , and then touch
.
Get Started 7
Device Basics
Your device is packed with features that simplify your life and expand your ability to stay
connected to the people and information that are important to you. The topics in this section will
introduce the basic functions and features of your phone.
Your Device‟s Layout
Turn Your Device On and Off
Turn Your Screen On and Off
Touchscreen Navigation
Your Home Screens
Status Bar
Enter Text
Google Account
Device Basics 8
Your Device’s Layout
The illustrations and descriptions below outline your device‟s basic layout.
Key Functions
●LED Indicator shows your device‟s battery status. It also flashes for incoming calls or
pending notifications.
● Back Key () returns you to the previous screen or closes the dialog box.
● Home Key () returns you to the Home screen.
● Recent App Key () allows you to show the Recent App screen.
● Menu Key () lets you open the menus of the current screen or application.
● Microphone allows other callers to hear you clearly when you are speaking to them.
Device Basics 9
●Display Screen displays all the information needed to operate your device. Use finger
gestures to navigate and interact with items on the screen.
●Proximity Sensor/Light Sensor automatically deactivates the touchscreen when you hold
the device near your face. This prevents you from unintentionally activating device functions
during a call. It also automatically turns off the backlight and brightens the display when you
are in sunlight or a bright room, and dims the display in darker places.
● Earpiece lets you hear the caller and automated prompts.
● Power Button lets you turn the device on or off, or turn the screen backlight on or off. This
button can be configured to end a call.
●Charger/Accessory Jack allows you to connect the micro-USB cable (included) to charge
the battery or to transfer files to and from a computer.
CAUTION! Inserting an accessory into the incorrect jack may damage the device.
●Speaker lets you hear the different ringtones and sounds. It also lets you hear the caller‟s
voice in speakerphone mode.
●microSD Card Slot (internal) allows you to insert a microSD card to support external
memory.
Note: Your device comes with the microSD card preinstalled under the device‟s battery.
● Internal Antennas facilitate reception and transmission. To maximize performance, do not
obstruct while using the device.
● Battery Cover Lock locks the battery cover.
● Camera Lens, as part of the built-in camera, lets you take pictures and videos.
● Camera Flash allows you to take pictures and videos in low light conditions.
● Headphone Jack allows you to plug in an optional headset for convenient, hands-free
conversations.
CAUTION! Inserting an accessory into the incorrect jack may damage the device.
●Volume Button allows you to adjust the ringtone and media volumes when you are not on a
call, or the voice volume during a call.
Turn Your Device On and Off
The instructions below explain how to turn your device on and off.
Turn Your Device On
Turn Your Device Off
Device Basics 10
Turn Your Device On
To turn your device on, follow the step below.
► Press and hold the Power button.
Turn Your Device Off
To turn your device off, follow the steps below.
► Press and hold the Power button to open the phone options menu. Touch Power off to
turn the device off.
Your screen remains blank while your device is off.
Turn Your Screen On and Off
Your device allows you to quickly turn the screen off when not in use and to turn it back on and
unlock it when you need it.
Turn the Screen Off When Not in Use
Turn the Screen On and Unlock It
Turn the Screen Off When Not in Use
To turn your screen off, follow the step below.
► To quickly turn the screen off, press the Power button. Pressing the Power button again
will turn on your device screen and show the lock screen.
To save battery power, the device automatically turns off the screen after a certain period of
time when you leave it idle. You will still be able to receive messages and calls while the
device‟s screen is off.
Note: For information on how to adjust the time before the screen turns off, seeSleep within
Display section.
Turn the Screen On and Unlock It
1. To turn the screen on, press the Power button.
2. Flick until it turns to (with a blue frame) to unlock the screen.
Device Basics 11
You can disable the screen lock or add a more secure one from the Settings menu.
See Screen lock within Security section.
Touchscreen Navigation
Your device‟s touchscreen lets you control actions through a variety of touch gestures.
Touch
Touch and Hold
Drag
Slide or Flick
Pinch and Spread
Rotate
Touch
Touch once with your finger to select or launch a menu, option, or application. A light touch
works best.
Warning: Do not touch with a pen or stylus. It may damage the touch screen.
Touch and Hold
To open the available options for an item (for example, a link in a Web page), simply touch and
hold the item.
Drag
Touch and hold your finger before you start to move it. Do not release your finger until you have
reached the target position.
Slide or Flick
To slide, quickly move your finger vertically or horizontally across the screen. To flick, move
your finger in lighter, quicker strokes than sliding. This finger gesture is always used in a vertical
motion, such as when scrolling through People entries or a message list.
Pinch and Spread
Pinch the screen using your thumb and forefinger to zoom out or spread the screen to zoom in
when viewing a picture or a Web page. (Move fingers inward to zoom out and outward to zoom
in.)
Device Basics 12
Rotate
For most screens, you can automatically change the screen orientation from portrait to
landscape by turning the device sideways. When entering text, you can turn the device
sideways to bring up a bigger keyboard. See Touchscreen keyboard for more details.
Note: The Auto-rotate screen check box in Home > Menu > System settings >
Display needs to be selected for the screen orientation to automatically change.
Your Home Screens
The Home screen is the starting point for your device‟s applications, functions, and menus. You
can customize your home screen by adding shortcuts, widgets, and more. Your home screen
extends beyond the initial screen. Swipe the screen left or right to display additional screens.
Customize the Home Screens
1. Status Bar: Displays the time, notification, and device status icons. Slide down to
display the Notifications panel.
2. Shortcut: Allows users to quickly launch applications.
3. Application Launcher: Touch to display available applications and widgets on the
device.
4. Favorites Tray: Keeps icons of your favorite application. The icons in the tray remain
visible on every Home screen. You can change icons except the Application launcher
icon (center).
5. Screen Position Indicator: Allows users to know where you are among five home
screens.
Device Basics 13
6. Folder: Allows users to store multiple application icons as a group.
7. Google Search Bar: Allows users to enter text or spoken keywords for a quick search
on the device or on the Internet. Touch to enter text or touch to speak your keyword.
Customize the Home Screens
Learn how to add, move, or remove items from the home screen.
Add Application Icons or Widget to the Home Screens
1. Touch on the Favorites tray.
2. Slide the APPS and WIDGETS screens to find the item you want to add to the Home
screens.
3. Touch and hold an application or widget icon. The initial Home screen appears.
4. Pressing the application or widget icon, move your finger left or right to find the place to
add the icon. The blue frame means each of five home screens.
5. Release your finger.
Move or Remove Items on the Home Screens
► Touch and hold the item you want to move or remove from the screen.
To move the item, drag it to a new area and release it.
To remove the item, touch and hold the item until you see “X Remove” at the top of
the home screen, and then drag the item until it turns red, and then release your
finger.
Change Wallpaper
1. Touch and hold the empty area of the Home screens.
2. Select one of the following options.
Carrier wallpaper: Select to use Boost wallpapers. Select the wallpaper and touch
Set wallpaper.
Gallery: Select to use saved or captured pictures on your device. Touch to select a
picture, and crop it before setting it as wallpaper.
ID wallpapers: Select to use ID wallpapers. Select the wallpaper and touch Set
wallpaper.
Live Wallpapers: Select to use Live wallpapers. Select the wallpaper and touch Set
wallpaper.
Device Basics 14
Icon
Description
Bluetooth® enabled
Wi-Fi® active (full signal)
Wallpapers: Select to use preset wallpapers. Select the wallpaper and touch Set
wallpaper.
Favorites Tray
Favorites Tray keeps five icons you usually use. The icons in the tray remain visible on every
Home screen. You can change icons except the Application launcher icon located in the center
of the tray.
To add a new icon on the Favorites Tray:
1. Remove the current icon on the tray. See Move or Remove Items on the Home Screens.
2. Touch and hold the application icon and drag it to the Favorites Tray.
3. Release your finger.
Use folders
You can combine several app icons in a folder. Drop one app icon over another on a Home
screen, and the two icons will be combined.
1. Drag one application icon over another icon.
2. Release your finger. You can see two icons piled within a folder (a black circle).
3. Tap a circle. You can see application icons within the folder.
4. Touch Unnamed Folder. The keyboard opens and you can name this folder. To
rename it, tap the name.
Status Bar
The status bar at the top of the screen provides device and service status information on the
right side and notification alerts on the left. To view notification alerts, slide the status bar down.
Status Icons
Notification Icons
Status Icons
Device Basics 15
Vibrate
Silent
Network (full signal)
Network (no signal)
3G (data service)
Airplane mode
Alarm set
Battery (charging)
Battery (full charge)
Battery (discharged)
Icon
Description
Missed call
New email
New Gmail
New SMS message
New MMS message
Event
Music application is running background
USB connection
Alarm
When animating, GPS is active
Downloading
Notification Icons
Device Basics 16
Enter Text
You can type on your device using one of the available touchscreen keyboards.
Touchscreen keyboard
Entering Text Using Swype
Entering Text Using the Android Keyboard
Copying and Pasting Text
Touchscreen keyboard
Your device provides convenient ways to enter letters, numbers, and symbols whenever you are
prompted to enter text. To manually display the touchscreen keyboard, simply touch a text field
where you want to enter text. There are two ways of entering text on your device: Swype and
Android keyboard.
Note: Swype is selected as a default keyboard.
To switch the touchscreen keyboard:
1. Press Home > Menu, and touch System settings > Language & input.
2. Touch Default under KEYBOARD & INPUT METHODS.
3. Choose Swype or Android keyboard.
Entering Text Using Swype
Swype® allows you to enter text by sliding your finger from letter to letter rather than touching
each key individually. To enter text, slide your finger from one letter to the next.
Device Basics 17
Swype Keyboard Overview
Note: Key appearance may vary depending on the selected application.
Device Basics 18 Text mode: Touch to toggle between the Alphabet keyboard and Number &
Symbol keyboard.
Swype Key: Touch and hold to access the tips or the settings of Swype.
Voice input mode: Touch to enter text using your voice.
Backspace: Touch to delete a character. Touch and hold to delete multiple
characters.
Smiley: Touch to insert a smiley. Touch and hold to view and select other
smileys.
Space: Touch to insert a space.
Enter: Touch to confirm your entry.
Shift: Touch to toggle between the uppercase, lowercase and caps lock text
input.
Tip: For tips on using Swype, touch and hold the Swype key and then select How to
Swype.
You can do the following with the Swype keyboard:
ABC Mode
In ABC mode, you can enter letters from the onscreen keyboard by sliding your finger. While in
this mode, the text mode key displays .
1. Select the ABC mode by touching . Capitalization in ABC mode can be altered by
touching .
(Unshifted) to make all letters in a word lowercase.
Device Basics 19
Loading...
+ 159 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.