Kymco Agility City 125 DRIVER'S MANUAL

DRIVER'S MANUAL

KWANG YANG MOTOR CO.,LTD.

AGILITY CITY

50/125

KWANG YANG MOTOR CO.,LTD.

NO.35 Wan Hsing Street, San Min District

Kaohsiung, Taiwan, Republic of PROC

Telephone : 886-7-3822526

FAX : 886-7-3950021

Dear KYMCO Motorcycle Users:Dear KYMCO Motorcycle Users:

Thank you for purchasing this KYMCO motorcycle and welcome to the familyThank you for purchasing this KYMCO motorcycle and welcome to the family

of KYMCO motorcycle riders. To enjoy safety and more pleasant riding, becomeof KYMCO motorcycle riders. To enjoy safety and more pleasant riding, become

throughly familiar with this driver's manual before your ride the motorcycle.throughly familiar with this driver's manual before your ride the motorcycle.

Your safety depends not only on your own alertness and familiarity with the moto-Your safety depends not only on your own alertness and familiarity with the moto-

rcycle but also the motorcycle mechanical condition. A pre-ride inspection beforercycle but also the motorcycle mechanical condition. A pre-ride inspection before

every outing and regular maintenance are essential. the quality of each KYMCO every outing and regular maintenance are essential. the quality of each KYMCO

motorcycle is guaranteed.motorcycle is guaranteed. Note:1.The information and specifications stated in this manual are for Note:1.The information and specifications stated in this manual are for

reference only and subject to change without notice. reference only and subject to change without notice.

2.When starting the engine, the battery must be installed to facilitate 2.When starting the engine, the battery must be installed to facilitate

Starting and increase the engine performance. Starting and increase the engine performance.

3.Our company reserves the right to make any alteration in the design..If the product

Is not the same as Manual.please according to the actual product.

We will not notice you again. We will not notice you again.

TABLE OF CONTENTS TABLE OF CONTENTS

1.PRECAUTIONS FOR A SAFE RIDING-------------------------------------1

2.ASSEMBLY PARTS----------------------------------------------------3

3.OPERATION INSTRUCTIONS--------------------------------------------5

IGNITION SWITCH/STEERING&HANDLEBAR LOCK---------------------------5

ELECTRIC STARTER BUTTON.HEADLIGHT SWITCH--------------------------6

HEADLIGHT DIMMER SWITCH-------------------------------------------7

HORN BUTTON/TURN SIGNAL SWITCH------------------------------------7

SEAT LOCK/MET-IN BOX.HELMET BUCKLE--------------------------------8

INSTRUMENTS-------------------------------------------------------9

4.PRE-RIDE INSPECTION----------------------------------------------10

ADVANCE INSPECTION.ENGINE OIL LEVEL INSPECTION/REFILLING---------10

BRAKE INSPECTION.TIRE INSPECTION---------------------------------11

FUEL LEVEL INSPECTION/REFILLING----------------------------------13

STEERING HANDLEBAR.INSTRUMENT LIGHTS INSPECTION------------------14

BRAKE LEVER FREE PLAY INSPECTION&ADJUSTMENT----------------------15

CHOKE KNOB-------------------------------------------------------16

TABLE OF CONTENTS TABLE OF CONTENTS

5.ENGINE STARTING METHODS----------------------------------------- 18

USE THE ELECTRIC STARTER BUTTON----------------------------------19

START WITH THE KICK LEVER----------------------------------------20

6.NORMAL RIDING METHOD---------------------------------------------21

7.PRECAUTIONS FOR RIDING-------------------------------------------23

8.HOW TO STOP RIDING-----------------------------------------------26

9.EASY MAINTENANCE-------------------------------------------------28

AIR CLEANER INSPECTION AND AIR CLEANER CLEANING&REPLACEMENT------28

BATTERY----------------------------------------------------------30

FUSE CHANGE------------------------------------------------------31

ENGINE OIL CHANGE------------------------------------------------32

SPARK PLUG INSPECTION--------------------------------------------34

10.IMPORTANT NOTICES-----------------------------------------------36

11.EXEXHAUST EMISSION CONTROL SYSTEM------------------------------37

12.POLLUTION-FREE PERIODIC MAINTENANCE SCHEDULE--------------------39

13.SPECIFICATIONS--------------------------------------------------40

1.PRECAUTIONS FOR A SAFE RIDING1.PRECAUTIONS FOR A SAFE RIDING

(1) CLOTHES(1) CLOTHES

To relax and wear comfortable clothes are the main To relax and wear comfortable clothes are the main

points for a safe riding. points for a safe riding.

To observe traffic laws, keep a cool mind, relax and be To observe traffic laws, keep a cool mind, relax and be

careful will provide you a safe riding. careful will provide you a safe riding. Wear helmet and fasten it tightly. Wear helmet and fasten it tightly. Have the clothes well-arranged. Fasten shirt cuffs and Have the clothes well-arranged. Fasten shirt cuffs and Keep them from hooking the brake lever. Keep them from hooking the brake lever. Wear low-heeled shoes for a safe riding. Wear low-heeled shoes for a safe riding. When riding, use both hands to grasp the handlebar. It When riding, use both hands to grasp the handlebar. It is very dangerous to hold the handlebar with one hand. is very dangerous to hold the handlebar with one hand.

CAUTION: CAUTION:

A motorcycle rider should not wear loose or too long

clothes to avoid danger.

During riding or 10 minutes after the motorcycle is

stopped, do not touch the exhaust muffler to avoid

scalding.

When parking the motorcycle, keep it away from dry

lawn or inflammables to avoid danger.

⌒1⌒⌒1⌒

④

②

①

③

(2) RIDING METHOD(2) RIDING METHOD

The safety of two-wheel vehicles is influenced by sitting

position. The rider should sit on the central part of the

seat cushion. If the rider sits on the rear part of the seat,

the load of front wheel will decrease. As a result, the

handlebar will swing and cause danger to the rider.

When making a turn, it will be easier for the rider to

steer the motorcycle by leaning the body inward slightly.

The motorcycle will lose its balance if the rider fails to

keep his body leaning inward.

When riding on a damaged or macadam road. Slow

down the speed and hold the handlebar tightly.

(3) CARRYING GOODS(3) CARRYING GOODS

Keep a good sitting posture to operate the motorcycle Keep a good sitting posture to operate the motorcycle properly. properly. The feel of the handlebar will be different when carrying The feel of the handlebar will be different when carrying goods on the motorcycle. Overloading may cause the goods on the motorcycle. Overloading may cause the handlebar to swing. Avoid riding with overload. handlebar to swing. Avoid riding with overload.

Max. loading capacity of the met-in box is 5kg. Max. loading capacity of the met-in box is 5kg.

⌒2⌒⌒2⌒

2. ASSEMBLY PARTS2. ASSEMBLY PARTS

Met-in BoxMet-in Box Rear Brake LeverRear Brake Lever Taillight/StoplightTaillight/Stoplight L. Rear Turn Signal Light L. Rear Turn Signal Light

Kick LeverKick Lever

Engine Serial NumherEngine Serial Numher

Main StandMain Stand L. Front Turn Signal LightL. Front Turn Signal Light

Fuel FillerFuel Filler Turn Signal SwitchTurn Signal Switch

Headlight Dimmer

Switch

Passing Signal Switch

Horn Button

⌒3⌒⌒3⌒

Headlight Switch Headlight Switch Electric Starter Button Electric Starter Button

Ignition SwitchIgnition Switch R. Front Turn R. Front Turn

Signal Light Signal Light Rear Brake LeverRear Brake Lever

Exhaust Muffler Exhaust Muffler R.Rear TurnR.Rear Turn Signal Light Signal Light Rear CarrierRear Carrier

BatteryBattery

Frame Serial NumberFrame Serial Number InstrumentsInstruments

⌒4⌒⌒4⌒

3. OPERATION INSTRUCTIONS3. OPERATION INSTRUCTIONS

(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK

Locking Method Locking Method

Turn the steering handlebar left to the full and then push

and turn the ignition switch key left to the "LOCK" position

,the handlebar can be locked.

Unlocking Method Unlocking Method

Turn the ignition switch key right to the"OFF" and the

"LOCK" is released automatically.

CAUTION: CAUTION:

After locking, turn the handlebar gently to make sure

that it is locked.

Do not turn the ignition switch to the"LOCK" Position

during riding, otherwise the handlebar will be out of

control and cause accidents.

Don't park your motorcycle at a place to hinder the traffic.

⌒5⌒⌒5⌒

ON ON

OFF OFF

LOCK LOCK

(2) ELECTRIC STARTER BUTTON(2) ELECTRIC STARTER BUTTON

To start the engine, first turn on the ignition switch and

then push the electric starter button. At this time, be sure

to fully apply the front or rear brake lever (pedal) in order

to connect the power.

CAUTION: CAUTION:

During engine running, do not push the electric starter

button to avoid engine damage.

Turn the headlight switch off and turn signal switch off

before using the electric starter button.

Release the electric starter button immediately after the

engine is started.

(3) HEADLIGHT SWITCH(3) HEADLIGHT SWITCH

At this position, the position light, headlight, instrument At this position, the position light, headlight, instrument lights and taillight turn off together. lights and taillight turn off together. At this position, the position light, instrument lights At this position, the position light, instrument lights and taillight light turn on. and taillight light turn on. At this position, the position light, headlight, instrument At this position, the position light, headlight, instrument lights and taillight light all turn on. lights and taillight light all turn on.

⌒6⌒⌒6⌒

(4) HEADLIGHT DIMMER SWITCH(4) HEADLIGHT DIMMER SWITCH

Switch to this position for using high beam.

When riding in downtown area or there is a

car coming from the opposite direction, use

low beam to avoid affecting the visibility of

coming cars.

PASSINGPASSING

When passing,if there are cars coming from

the opposite direction,press and release the

PASSING switch and the headlight will wink

to warn the coming cars.

CAUTION: CAUTION:

This indicator comes on when the long distance light

is turned on.

(5) HORN BUTTON/TURN SIGNAL SWITCH(5) HORN BUTTON/TURN SIGNAL SWITCH

When the ignition switch key is turned the"ON"position,

push the horn button and it will sound. For turning to the

right. For turning to the left. Push the turn signal

switch button to release it. Horn Button.

The horn and turn signal switch do not work when the

ignition switch is the"OFF".

CAUTION: CAUTION:

The turn signal light will not release automatically. Be

sure to reset it after use; otherwise it may affect the traffic

safety.

⌒7⌒⌒7⌒

123

(6) SEAT LOCK/MET-IN BOX(6) SEAT LOCK/MET-IN BOX

Unlock the seat and put the helmet in the MET-IN box.

<<

Unlocking Method>>

<<Unlocking Method>>

Stop the engine and turn the ignition switch to the "OFF"

position. Insert the ignition switch key into the seat lock

and turn it right.

To lock the seat, push on it until it lock automatically.

Make sure the seat is secure before riding.

CAUTION: CAUTION:

Never put the key inside the seat cushion to lock the seat. Never put the key inside the seat cushion to lock the seat.

(7) HELMET BUCKLE(7) HELMET BUCKLE

1.Open the seat with the ignition switch key and lift up the

seat.

2.Put the helmet retaining ring into the helmet buckle.

3.Put down the seat and it will lock automatically.

Take out the helmet in the reserve order of the above steps.

CAUTION: CAUTION:

When riding, wear the helmet and do not retain it on the

motorcycle to avoid damage of coated parts.

⌒8⌒⌒8⌒

(8) INSTRUMENTS(8) INSTRUMENTS

MILIMETRE COUNTER: The total riding mileage is

indicated by kilometer. The figure in black and white is an

unit of 100m.

TURN SIGNAL INDICATOR LIGHT: When the turn signal switch is

operated,this indicator will wink.

HIGH BEAM INDICATOR LIGHT: This indicator comes on when the

long distance light is turned on.

FUEL GAUGE: The fuel gauge is to show the volume of gasoline

in the fuel tank. If the fuel gauge pointer is at the red area,

the fuel is insufficient. Refill nonleaded gasoline as soon as

possible.

⑥⑥

SPEEDOMETER: The riding speed is indicated by km/hour or mph.

⑦⑦

CLOCK:Display the time.

⑧⑧

CLOCK SETTING BUTTON:The clock time setting.

CLOCK ADJUST BUTTON:The clock time adjust.

⌒9⌒⌒9⌒

⑦⑦

⑥⑥

⑧⑧