Kussmaul 091-28-IND User Manual

Indicator

6

INSTALLATION INSTRUCTIONS

Model 091-28-IND AIR EJECT INDICATOR

BlackOrange

Pressure Switch

Air to Vehicle

091-28

AIR EJECT

Red

Master Switch

1. Install pressure switch in side of Tee fitting.

2. Install Check Valve in Tee fitting as illustrated, note direction of check valve.

3. Install Tee fitting subassembly in Air Eject as shown.

4. Wire on side of pressure switch to chassis ground with Black Wire.

Check Valve

Tee Fitting

Chassis
Ground

5. Wire second side of pressure switch to indicator with Orange Wire.

6. Wire second side of indicator to a switched +12 volt supply. If it is desired to illuminate the
indicator whenever the air line is connected, even with the master switch OFF, the power
to the indicator may be taken directly from the battery.

SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS

KUSSMAUL ELECTRONICS COMPANY, INC.

170 CHERRY AVEN UE, WEST SAYVILLE, NEW YORK, 11796-1221 USA

TEL. In NY: TOLL FREE: FAX:

November 12, 2004

631 567-0314 800 346-0857 631 567-582