Kussmaul 091-137 User Manual
INSTALLATION INSTRUCTIONS
BATTERY SAVER FILTER
Model 091-137
BATTERY SAVER FILTER
Model 091-137
Typical Installation
single filter, 3 amp or
ININOUT
+
-
BATTERY SAVER
BATTERY SAVER FILTER
Model 091-137
LOAD
+
-
less loa d .
3 ampere
T y pical Installation
6 ampere load
OUT
+
IN OUT
2 filters in parallel
6 AMPERE
+
LOAD
-
-
BATTERY SAVER
1. The Model 091-137 Battery Saver Filter is designed to filter the full wave rectified,
unfiltered D.C. Output of the Battery Saver. The output is a low ripple 13.8 VDC.
2. Install the filter in a convenient, dry location and wire as illustrated in the diagram
above. Use #18 AWG minimum wire size for wire runs up to 15 feet. Longer
distances require a larger wire size.
3. Note that the maximum current capacity of the filter is 3 amps. For higher currents
use 2 or more filters may be connected in parallel.
SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS
FEB. 7, 2003
KUSSMAUL ELECTRONICS COMPANY, INC.
170 CHERR Y AVEN UE, WEST SAYVILLE, NEW YORK, 11796-1221 USA
TEL. In NY: TOLL FREE: FAX:
631 567-0314 800 346-0857 631 567-5826
Loading...