Kubota L3240, L3540, L4240, L5240, L5740 Brochure

OPERATOR'S MANUAL
L3240·L3540MODELS L4240·L5240·L5740 with ROPS
L4240·L5240·L5740 with CAB
L 3 2 4 0
· L 3 5 4 0
· L 4 2 4 0
· L 5 2 4 0
· L 5 7 4 0
PRINTED IN JAPAN
KUBOTA Corporation 2011
©
READ AND SAVE THIS MANUAL
ABBREVIATION LIST
Abbreviations
2WD
4WD
API
ASABE
ASTM
DIN
DT
fpm
GST
Hi-Lo
HST
m/s
PTO
RH/LH
ROPS
rpm
r/s
Definitions
Two Wheel Drive
Four Wheel Drive
American Petroleum Institute
American Society of Agricultural and Biological Engineers, USA
American Society for Testing and Materials, USA
Deutsches Institut für Normung, GERMANY
Dual Traction [4WD]
Feet Per Minute
Glide Shift Transmission
High Speed-Low Speed
Hydrostatic Transmission
Meters Per Second
Power Take Off
Right-hand and left-hand sides are determined by facing in the direction of forward travel
Roll-Over Protective Structures
Revolutions Per Minute
Revolutions Per Second
KUBOTA Corporation is ···
Since its inception in 1890, KUBOTA Corporation has grown to rank as one of the major firms in Japan.
To achieve this status, the company has through the years diversified the range of its products and services to a remarkable extent, until today, 19 plants and 16,000 employees produce over 1,000 different items, large and small.
All these products and all the services which accompany them, however, are unified by one central commitment. KUBOTA makes products which, taken on a national scale, are basic necessities. Products which are indispensable, products intended to help individuals and nations fulfill the potential inherent in their environment. For KUBOTA is the Basic Necessities Giant.
This potential includes water supply, food from the soil and from the sea, industrial development, architecture and construction, and transportation.
Thousands of people depend on KUBOTA's know-how, technology, experience and customer service. You too can depend on KUBOTA.
SAE
SMV
Society of Automotive Engineers, USA
Slow Moving Vehicle
This operator’s manual has been edited for global use.
Please keep in mind, however, that some models discussed herein might not be
available in your country.
L3240/L3540/L4240
L5240/L5740 (Australia)
AS . F . 3 - 6 . 1 . AK
FOREWORD
Thank you very much for choosing the L series tractor. This operator's manual covers the operation, inspection and preventive maintenance instructions that is specific to the oceania models. For other information and instructions, refer to the separately issued operator's manual for the sister models. (L3240-3 to L5740-3) Please read both manuals carefully, to operate the machine properly and safety. Proper daily inspection, servicing and lubrication keeps your machine in good condition.
3
This symbol, the industry's ''Safety Alert Symbol'', is used throughout this manual and on labels on the machine itself to warn of the possibility of personal injury. Read these instructions carefully. It is essential that you read the instructions and safety regulations before you attempt to assemble or use this unit.
3 3 3
IMPORTANT :
NOTE :
DANGER :
WARNING :
CAUTION :
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates that equipment or property damage could result if instructions are not followed.
Gives helpful information.
SAFETY FIRST
CONTENTS
SPECIFICATIONS....................................................................................................... 1
SPECIFICATION TABLE [HST Type] ...................................................................... 1
SPECIFICATION TABLE [Manual Transmission Type] ........................................... 3
TRAVELING SPEEDS ............................................................................................. 5
HST Type.......................................................................................................................... 5
Manual Transmission Type...............................................................................................5
OPERATING THE TRACTOR ..................................................................................... 6
STARTING ............................................................................................................... 6
Turn Signal / Hazard Light Switch ....................................................................................6
Horn Button....................................................................................................................... 6
Tractor Lights....................................................................................................................7
HYDRAULIC UNIT....................................................................................................... 8
REMOTE HYDRAULIC CONTROL SYSTEM.......................................................... 8
Remote Control Valve.......................................................................................................8
Remote Control Valve Lever.............................................................................................8
TIRES, WHEELS AND BALLAST................................................................................ 9
TIRES....................................................................................................................... 9
Inflation Pressure..............................................................................................................9
Dual Tires ......................................................................................................................... 9
WHEEL ADJUSTMENT ........................................................................................... 9
Front Wheels (with 4 wheel drive) ..................................................................................10
Rear Wheels...................................................................................................................11
PERIODIC SERVICE................................................................................................. 12
SERVICE AS REQUIRED...................................................................................... 12
Replacing Fuse...............................................................................................................12
Replacing Light Bulb.......................................................................................................13
SPECIFICATIONS
SPECIFICATION TABLE [HST Type]
[ROPS and CAB models]
L3240 L3540 L4240 L5240 L5740
D1703-M-E2-
HST1
18.7 (25.1)/ 2700
101.7 (10.4) 112.8 (11.5) 139.7 (14.2) 180.6 (18.4)
12V, RC: 123min, CCA: 490A
Engine
Capacities
Dimensions
Weight
Model
Model
Type Indirect injection vertical, water-cooled, 4-cycle diesel
Number of cylinders 3 4
Total displacement L 1.647 1.826 2.197 2.434
Bore and stroke mm 87 x 92.4 87 x 102.4 87 x 92.4 87 x 102.4
Net power* kW (HP) 23.9 (32.0) 26.1 (35.0) 31.3 (42.0) 38.8 (52.0) 42.5 (57.0)
PTO power* (factory observed)
Maximum torque
Battery capacity
Fuel tank L 44 50 54
Engine crankcase (with filter)
Engine coolant L 6.0 7.5 8.2
Transmission case L 42 43 45
Overall length (without 3p)
Overall width (min. tread)
with
Overall height
Wheel base mm 1805 1895 1915
Min. ground clearance mm 350 375 400
Tread
ROPS
with
CAB
Front mm 1150 1145 1340
Rear mm 1200, 1300, 1385, 1480
with
ROPS
with
CAB
kW (HP)/
rpm
N-m
(kgf-m)
L 5.7 6.7 8.2 9.4
mm 2960 3125 3250
mm 1520 1665 1570
mm 2385 2405 2490
mm --- 2295 2405
kg 1540 1665 1745
kg --- 1815 1920
D1803-M-E2-
HST1
20.9 (28.0)/ 2700
4WD
V2203-M-E2-
HST1
26.1 (35.0)/ 2700
12V, RC: 133 min, CCA: 582A
1285, 1435,
1530
V2403-M-
TE2-HST1
33.6 (45.0)/ 2600
1225, 1325, 1425, 1525
1SPECIFICATIONS
V2403-M-
TE2-HST2
37.3 (50.0)/ 2700
2 SPECIFICATIONS
Traveling
system
Hydraulic
unit
PTO
Model
Standard tire size
Clutch Dry type single stage
Steering Hydrostatic power steering
Transmission Hydrostatic transmission (3 speeds)
Braking system Wet disk type
Min. turning radius (with brake)
Hydraulic control system Position control
Pump capacity L/min. 31.5 37.0 35.6 37.0
3-point hitch SAE category 1 SAE category 1, 2
Max. lift force
System pressure
Rear PTO
MID-PTO (if equipped)
Front 7-16 8-16 9.5-16
Rear 12.4-24 14.9-24 13.6-28
m2.7 2.8
At lift points
24 in. behind lift points
PTO/ Engine speed
PTO/ Engine speed
kg 1700 1750
kg 1200 1250 1350
MPa
(kgf/cm )
rpm 540/2685 540/2640 540/2590
rpm 2000/2715 2000/2670 2000/2615
L3240 L3540 L4240 L5240 L5740
4WD
17.7 (180)
SAE 1-3/8, 6 splines
USA No.5 (KUBOTA 10-tooth) involute spline
NOTE : *Manufacturer's estimate The company reserve the right to change the specifications without notice.
Loading...
+ 11 hidden pages