KTM 85 SX, XC, XC 105 SX User Manual

85 SX, XC

105 SX, XC

OWNER’S MANUAL 2008

3211224en

ENGLISH

INTRODUCTION

Please insert the serial numbers of the motorcycle below

Chassis number

Engine number

Stamp of dealer

All information contained is without obligation. KTM-Sportmotorcycle AG particularly reserves the right to modify any equipment, technical specifications, prices, colors, shapes, materials, services, service work, constructions, equipment and the like so as to adapt them to local conditions or to cancel any of the above items, all without previous announcement and without giving reasons. KTM may stop manufacturing certain models without previous notice. KTM shall not be held liable for any deviations of availability and/or ability to deliver, illustrations, descriptions, printing and/or other errors. The illustrated models partly contain extra equipment, which is not applied to standard models.

Now you own a modern motorcycle that you and your youngster will certainly enjoy, provided that you service and maintain it properly.

In accordance with the international quality management ISO 9001 standard, KTM uses quality assurance processes that lead to the highest possible product quality.

ENGLISH

IMPORTANT INFORMATION

INTENDED PURPOSE

KTM mini-sports motorcycles are designed and constructed to resist the usual wear and tear of normal use in competitions. The motorcycles comply with the regulations and categories currently in effect with the leading international motorcycle associations.

OWNER’S MANUAL

Please read this manual thoroughly before letting your youngster ride the motorcycle for the first time. This manual contains important information and recommendations that will help you and your youngster to operate and handle the motorcycle properly. In the interest of everybody involved, we urge you to pay particular attention to instructions and information marked as follows:

This manual contains important information on the operation and maintenance of your new KTM motorcycle. It went to press describing your model’s latest state of development. Nevertheless, the descriptions may deviate slightly from the current design as our motorcycles are permanently improved.The Owner's Manual is an integral part of the motorcycle and must be handed over to the new owner when the motorcycle is sold.

SERVICE

Observance of the service, maintenance and tuning instructions for the engine and chassis specified in the Owner's Manual is a prerequisite for faultless operation and the avoidance of premature wear. An improperly tuned chassis can lead to damage and breakage of the chassis components (see chapter on checking the basic chassis setting). The use of the motorcycle under extreme conditions, e.g. on extremely muddy and wet terrain, can lead to higher than average wear on components such as the drive train or the brakes. In this case it may become necessary to service or replace wear parts before the service limit specified in the maintenance schedule has been reached. We expressly point out that work marked with an asterisk (*) in the chapter "Maintenance work on the chassis and engine" must be performed by a KTM workshop. If maintenance work should become necessary during a competition, it must be performed by a trained mechanic. Please strictly observe the prescribed running-in periods and inspection and maintenance intervals. Compliance with these instructions will significantly prolong the life of your motorcycle.

– Ignoring these instructions can be dangerous to life and limb!

– Ignoring these instructions may damage parts of the motorcycle or impair the motorcycle's

traffic safety!

ENGLISH

IMPORTANT INFORMATION

WARRANTY

The service work specified in the "Lubrication and Maintenance Schedule" must be performed by a KTM workshop and recorded in the service manual otherwise claims under the warranty shall become void. No claims can be filed under the warranty for damage or consequential damage caused by manipulations or conversions to the motorcycle.

AUTOMOTIVE FLUIDS

The fuels and lubricants specified in the Owner's Manual or automotive fluids with equivalent specifications must be used in accordance with the maintenance schedule.

SPARE PARTS, ACCESSORIES

For the safety of your child, only use spare parts and accessories approved by KTM. KTM shall not assume any liability for other products or consequential damage resulting from the use of such products. When special needs arise, please contact a KTM dealer, who will seek the assistance of the KTM importer if necessary.

SAFETY

Parents should keep in mind that the safety of their youngsters always depends on the efforts made by the parents to ensure that the motorcycle is kept in good working order and only used on safe terrains. Nevertheless, driving the motorcycle, like driving any other vehicle, involves a potential risk. Therefore, please make sure that all fundamental precautions are taken. Please also read the „INFORMATION ON SAFE DRIVING FOR PARENTS“ on page 4.

TRANSPORT

When transporting your motorcycle, secure it with elastic straps or other mechanical devices in an upright position. Be sure that the fuel tap is closed. If the motorcycle topples over, fuel can flow out of the carburetor or fuel tank.

ENVIRONMENT

Riding an off-highway motorcycle is a wonderful form of outdoor recreation and we certainly hope that you and your youngsters will enjoy it to the full. However, this enjoyable outdoor activity can cause environmental problems or lead to conflicts with other people. Responsible use of the motorcycle will prevent such problems and conflicts. You can contribute to securing the future of motorcycling by making sure that you and your youngsters only use the motorcycle within the limits established by the applicable laws, making environmental protection one of your top priorities and never violating other people’s rights.

In this spirit, we hope that you and your youngsters will always safely enjoy your motorcycle!

KTM-SPORTMOTORCYCLE AG 5230 MATTIGHOFEN, AUSTRIA

Attachments: 1 spare parts manual chassis & engine

ENGLISH

IMPORTANT INFORMATION FOR PARENTS ABOUT SAFE DRIVING

The 85/105 SX/XC mini motorcycles are off-road motorcycles designed for one person only. They are not allowed on public roads.

The vehicle dimensions and components are designed for children from 10 to 15 years of age with a maximum weight of 75 kg (33,98 lb).

– Have your youngster wear proper protective gear whenever he or she rides the motorcycle: helmet, eye

protection, chest, back, arm and leg protectors, gloves and boots. To set a good example, be sure to wear protective gear yourself whenever riding a motorcycle!

– Before your youngster takes his or her first ride, explain how each of the controls works and check if

your youngster has understood what you explained. We recommend to review the entire owner’s manual with your youngster item by item, paying particular attention to the specially marked warnings and pointing out the danger of injury.

– Instruct your youngster about riding and falling techniques, explain how the motorcycle will respond

to shifting of the rider’s weight, etc.

– Before starting the motorcycle for the first time check whether the basic fork and shock absorber

settings are suitable for your child's weight (see chapter on checking the basic chassis setting)

– Before using the motorcycle you should always check all components for proper operation (see mai-

nenance schedule). Have your youngster perform these technical checks himself / herself as well.

– Whenever you go for a ride with your youngster, keep in mind that the speed should be adjusted to

your youngster and not the other way around.

– Your youngster must understand that all instructions he or she receives from you or any other super-

vising adult must be followed.

– Your child must be physically ready to ride a motorcycle. This means that he or she must at least be

able to ride a bicycle. Being good at sports that require fast reactions is an additional advantage. Your youngster should be strong enough to pick up the motorcycle after a fall.

– Never demand too much of your youngster. Give him or her time to get used to the motorcycle and to

improve his / her riding skills. Do not even consider letting your youngster participate in a race before his / her physical condition, riding skills and motivation have sufficiently developed.

– Explain to your youngster that he / she should always adjust his / her riding speed to the local condi-

tions as well as to his / her own riding skills and that excessive speed can cause falls and severe injuries. Always keep in mind that youngsters tend to underestimate dangers or fail to recognize them

altogether. The riding speed must be reduced, in particular, on unknown terrain. – Never let your youngster ride the motorcycle without supervision. An adult should always be present. – The motorcycle is designed for one rider only. Your youngster is not allowed to transport a passenger. – When you go for a ride, somebody at home should always know where you are going and when you

will be back. This makes it easier to send you help, should problems occur.

ENGLISH

TABLE OF CONTENTS

Page

IMPORTANT INFORMATION FOR PARENTS ABOUT SAFE

DRIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

SERIAL NUMBER LOCATIONS . . . . . . . . . . . . . . . . . . . .6

Chassis number . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Engine number . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION INSTRUMENTS . . . . . . . . . . . . . . . . . . . . .6

Clutch lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Hand brake lever . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Short circuit button . . . . . . . . . . . . . . . . . . . . . . . . . .7

Filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Fuel tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Choke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Shift lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Kickstarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Foot brake pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Plugin- Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Side stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Compression damping of fork . . . . . . . . . . . . . . . . . . .8

Rebound damping of fork . . . . . . . . . . . . . . . . . . . . . .8

Damping action during compression of shock absorber .9

Rebound damping function of the shock absorber . . . .9

GENERAL TIPS AND WARNINGS FOR STARTING THE

MOTORCYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Instructions for the first ride . . . . . . . . . . . . . . . . . . .10

Running in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

DRIVING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . .11

What you should check before each start . . . . . . . . . .11

Starting when the engine is cold . . . . . . . . . . . . . . . .12

Starting when the engine is warm . . . . . . . . . . . . . . .12

What to do when the engine is “flooded“ . . . . . . . . . .12

Starting off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Shifting/Riding . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Refueling, fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Braking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

PERIODIC MAINTENANCE SCHEDULE . . . . . . . . . . . . .14

MAINTENANCE WORK ON CHASSIS AND ENGINE . . . .16

Checking and adjusting the steering head bearing . . .16

Breather plug front fork . . . . . . . . . . . . . . . . . . . . . .16

Cleaning the dust sleeves of the telescopic fork . . . . .17

How to change the handlebar position . . . . . . . . . . . .17

Changing the spring preloading of the shock absorber .17

Basic suspension setup for the weight of the driver . . .18

Checking the shock absorber and spring . . . . . . . . . .18

Page

Determining the static sag of the shock absorber . . . .18

Determining the riding sag of the shock absorber . . . .18

Overview of the shock absorber springs . . . . . . . . . . .19

Checking the basic setup of the telescopic fork . . . . .19

Overview of the telescopic fork springs . . . . . . . . . . .19

Checking chain tension . . . . . . . . . . . . . . . . . . . . . .20

Correct chain tension . . . . . . . . . . . . . . . . . . . . . . . .20

Chain maintenance . . . . . . . . . . . . . . . . . . . . . . . . .20

General information about KTM disc brakes . . . . . . . .21

Adjusting free travel of the hand brake lever . . . . . . .21

Checking the brake fluid level/ refilling . . . . . . . . . . .22

Checking front brake pads . . . . . . . . . . . . . . . . . . . .22

Replacing the front brake pads . . . . . . . . . . . . . . . . .22

Changing basic position of the brake pedal . . . . . . . .23

Checking the rear brake fluid level . . . . . . . . . . . . . .23

Refilling the rear brake fluid reservoir . . . . . . . . . . . .23

Checking rear brake pads . . . . . . . . . . . . . . . . . . . . .23

Dismounting and mounting the front wheel . . . . . . . .24

Dismounting and mounting the rear wheel . . . . . . . . .25

Tires, air pressure . . . . . . . . . . . . . . . . . . . . . . . . . .25

Checking spoke tension . . . . . . . . . . . . . . . . . . . . . .25

Cleaning the air filter . . . . . . . . . . . . . . . . . . . . . . . .26

Exhaust system . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Changing the original position of the clutch lever . . . .27

Checking the oil level of the hydraulic clutch . . . . . . .27

Bleeding of the hydraulic clutch . . . . . . . . . . . . . . . .27

Adjusting the throttle cable . . . . . . . . . . . . . . . . . . .27

Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Checking coolant level . . . . . . . . . . . . . . . . . . . . . . .28

Refilling/Bleeding the cooling system . . . . . . . . . . . .28

Carburetor adjustment . . . . . . . . . . . . . . . . . . . . . . .29

Draining the float chamber of the carburetor . . . . . . .30

Checking gear oil level . . . . . . . . . . . . . . . . . . . . . . .30

Changing gear oil . . . . . . . . . . . . . . . . . . . . . . . . . .30

TROUBLE SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . .31

CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Use after period of storage . . . . . . . . . . . . . . . . . . . .33

TECHNICAL SPECIFICATIONS – CHASSIS . . . . . . . . . .34

TECHNICAL SPECIFICATIONS - ENGINE . . . . . . . . . . .35

CARBURETOR SETTING . . . . . . . . . . . . . . . . . . . . . . .37

HEAD WORD INDEX . . . . . . . . . . . . . . . . . . . . . . . . . .38

ENGLISH

SERIAL NUMBER LOCATIONS

Chassis number

The chassis number is stamped on the right side of the steering head tube. Enter this number in the field on page no 1.

Engine number

The engine number is stamped into the engine housing underneath the carburetor. Enter this number in the field on page no 1.

Clutch lever

The clutch lever [1] is located on the left side of the handlebar. The adjusting screw [A] is used to change the original position of the clutch lever (see maintenance work on chassis and engine). The clutch is hydraulically actuated and adjusts itself automatically.

Hand brake lever

The hand brake lever [2] is mounted on the handle bars on the right and actuates the front wheel brake.The adjusting screw [B] is used to change the original position of the hand brake lever (see maintenance work on chassis and engine).

OPERATION INSTRUMENTS »

ENGLISH

OPERATION INSTRUMENTS

Filler cap

To open it: turn filler cap counter-clockwise. To close it: put filler cap back on and tighten it by turning it clockwise.

Install tank breather hose [2] without kinks.

Fuel tap

OFF

In this position the fuel tap is closed. No fuel can flow to the carburetor.

ON When the motorcycle is running the grip is must be in the ON

position to enable fuel to flow to the carburetor. The tank will drain completely in this position.

Choke

The choke button [3] is located on the left side of the carburetor. Pulling the choke button [3] all the way out opens a bore in the carburetor through which the engine can take in additional fuel, thus achieving the "rich" fuel air mixture needed for cold starting. Pushing the choke button back in closes the bore in the carburetor.

Shift lever

The shift lever is mounted on the left side of the engine. The position of the gears is shown in the illustration. Neutral, or the idle speed, is located between first and second gear.

Short circuit button

The short circuit button [1] turns off the engine. When pressing this button, the ignition circuit is short-circuited.

2,3,4,5,6

OFF ON

ENGLISH

OPERATION INSTRUMENTS

Kickstarter

The kickstarter is mounted on the right side of the engine. Its upper part can be swivelled.

Foot brake pedal

The foot brake pedal is located in front of the right foot rest. Its basic position can be adjusted to your seat position (see maintenance work).

Plugin- Stand (SX)

The plug-in stand [1] included in the scope of supply can be plugged into the left side of the bike at the end of the swinging fork.

Side Stand (XC):

Use your foot to swing the side stand forwards to the stop. Make sure it rests securely on solid ground.

Compression damping of fork

Hydraulic compression damping determines the reaction when the fork is compressed. The degree of compression can be adjusted with adjusting screws at the bottom of the fork legs.Remove the protecting cap. Turn the knob [2] clockwise to increase damping, turn it counterclockwise to reduce damping during compression.

STANDARD ADJUSTMENT – turn adjusting screw clockwise as far as it will go – turn it back by as many clicks as are specified for the relevant type of fork

Type WP Suspension 05187D05 15 clicks Type WP Suspension 05187D06 20 clicks

Rebound damping of fork

Hydraulic rebound damping determines the reaction when the fork is rebound. By turning the adjusting screw [3] (REB), the degree of damping of the rebound can be adjusted. Turn the knob clockwise to increase damping, turn it counterclockwise to reduce damping during rebounding.

STANDARD ADJUSTMENT – turn adjusting screw clockwise as far as it will go – turn it back by as many clicks as are specified for the relevant type of fork

Type WP Suspension 05187D05 20 clicks Type WP Suspension 05187D06 20 clicks

ENGLISH

OPERATION INSTRUMENTS

Damping action during compression of shock absorber

The shock absorber on the models can synchronize the compression damping in the low and high-speed range separately (Dual Compression Control). Low and high speed refers to the movement of the shock absorber during compression and not to the speed of the motorcycle. The low and high-speed technology overlaps. The low-speed setting is primarily for slow to normal shock absorber compression rates.The high-speed setting is effective at fast compression rates.Turning in a clockwise direction will increase the damping, turning counterclockwise will decrease the damping.

Standard low-speed setting:

– Turn the adjusting screw [1] to the limit in a clockwise direction using a

screwdriver .

– Unscrew the respective number of clicks for the specific type of shock absorber

in a counterclockwise direction.

Type WP Suspension 15187D02 15 clicks Type WP Suspension 15187D04 15 clicks

Standard high-speed setting:

– Turn the adjusting screw [2] to the limit in a clockwise direction using a

box wrench.

– Unscrew the respective number of turns for the specific type of shock absorber

in a counterclockwise direction.

Type WP Suspension 1518DC02 2 turns Type WP Suspension 15187D04 2 turns

The damping unit of the shock absorber is filled with high-compression nitrogen. Never try to take the shock absorber apart or to do any maintenance work yourself. Severe injuries could be the result. Never unscrew the black screw 3 connection (24mm).

Rebound damping function of the shock absorber

By using the adjusting screw [4], the degree of damping of the rebound can be adjusted. Turn the knob clockwise to increase damping, turn it counterclockwise to reduce damping during rebounding.

STANDARD ADJUSTMENT: – turn the adjusting screw clockwise to the stop. – then turn the adjusting screw counterclockwise, counting the number of

clicks that corresponds to the respective type of shock absorber.

Type WP Suspension 15187D02 22 clicks Type WP Suspension 15187D04 22 clicks

ENGLISH

GENERAL TIPS AND WARNINGS FOR STARTING THE MOTORCYCLE

– Have your youngster wear proper protective gear whenever

he or she rides the motorcycle: helmet, eye protection, chest, back, arm and leg protectors, gloves and boots. To set a good example, be sure to wear protective gear yourself whenever

riding a motorcycle! – Only use accessory parts recommended by KTM. – The front and rear wheel are only allowed to be tired with

tires that have the same profile type. – Your youngster's driving speed should always be adjusted to

his/her driving skills as well as to the terrain. – Your youngster should never be allowed to ride the motorcy-

cle without supervision. – Replace the helmet visor or goggle glasses early enough. When

light shines directly on a scratched visor or goggles, you will

be practically blind. – Never leave your motorcycle without supervision as long as

the engine is running. – SX and XC models are designed for one person only. Passengers

are not allowed. – These models do not comply with the regulations and safety

standards established by the law. Therefore, they are not per-

mitted on public roads. – Always keep in mind that other people feel molested by

excessive noise.

Instructions for the first ride

– Make sure the work for the "pre-delivery inspection" was per-

formed by your authorized KTM workshop. The DELIVERY CERTIFICATE and SERVICE MANUAL will be handed over when you pick up your vehicle.

– Before your youngster takes his or her first ride, explain how

each of the controls works and check if your youngster has understood what you explained. We recommend to review the entire owner’s manual with your youngster item by item, pay ing particular attention to the specially marked warnings and pointing out the danger of injury.

– Adjust the clutch lever, hand lever and foot brake pedal so

your child can operate them easily!

– To prevent injury, teach your youngster the basic riding skills

on soft ground, e.g. on a meadow or in the garden. Be sure that there is room enough to maneuver, and that no other rid ers are close.

– To ensure that your youngster gets the feel of the hand brake,

have your youngster operate the hand brake while you push the motorcycle. Do not start the engine before your young ster has learned to apply hand brake with appropriate pressure.

– To familiarize your youngster with the operation of the hand

brake let him or her practice to operate the hand brake while you are pushing the motorcycle. Do not start the engine before he or she is thoroughly familiar with the use of the hand brake.

– Initially, your youngster should ride back and forth between

two persons who help the young rider to stop the motorcycle. However, you should also teach your youngster how to stop the motorcycle himself/herself.

– To improve his/her riding skills, your youngster should prac

tise riding the motorcycle standing on the footpegs or to rid ing at the slowest possible speed. Additionally, you can arrange a series of obstacles and have your youngster drive around them, etc.

– Pay attention to the running-in procedure.

Running in

– Even very precisely machined sections of engine components

have rougher surfaces than components which have been sli ing across one another for quite some time. Therefore, every engine needs to be broken in. For this reason, during its first 30 minutes the engine must not be revved up to its perform

ance limits. – Apply low but changing loads for running-in. – DO NOT DRIVE AT FULL LOAD FOR THE FIRST 30

MINUTES!

ENGLISH

DRIVING INSTRUCTIONS

What you should check before each start

When you start off, the motorcycle must be in a perfect technical condition. For safety reasons, you should make it a habit to perform an overall check of your motorcycle before each start. The following checks should be performed:

1 CHECKING THE ENGINE

Check the engine for any oil leakage. Too little gear oil will lead to premature wear and consequently destroy the transmission.

2 FUEL

Check that there is sufficient fuel in the tank; when closing the filler cap, check that the tank venting hose is free of kinks.

3 CHAIN

A loose chain was fall off the chain wheels; an extremely worn chain may tear, and insufficient lubrication may result in unnecessary wear of the chain and chain wheels.

4 TIRES

Check for damaged tires. Tires showing cuts or dents must be replaced. Also check the air pressure. Insufficient tread and incorrect air pressure deteriorate the driving performance.

5 BRAKES

Check the correct functioning of the braking system. Verify that there is sufficient brake fluid in the reservoir. The reservoirs have been designed in such a way that brake fluid does not need to be refilled even when the brake pads are worn. If the level of brake fluid falls below the minimum value, this indicates a leak in the braking system or completely worn out brake pads. Always have the brake system checked by a KTM workshop to avoid brake failure. Also check the state of the brake hose and the thickness of the brake linings. Check free travel at the hand brake lever and foot brake lever.

If the resistance in the hand brake lever feels “spongy” (too much play), this is an indication that something is wrong with the brake system. Don’t let your child ride the motorcycle anymore without first having the brake system looked over by a KTM dealer.

6 CABLES

Check correct setting and easy running of all control cables.

7 COOLING FLUID

Check the level of cooling fluid when the engine is cold.

ENGLISH

DRIVING INSTRUCTIONS

Starting when the engine is cold

1 Open fuel tap [1] . 2 Put the gear in neutral 3 Activate the cold-starting aid (choke) [2]. 4 Leave throttle closed and kick down the kickstarter vigorously all the way.

– To avoid injury when starting the engine, always wear strong bikers boots!You

may slip off the kickstarter, or the engine may kick back if you do not kick hart enough.

– Check for power transmission at temperatures below 0°C (32°F) before

you actuate the kickstarter. If you depress the kickstarter without feeling any resistance, power ist not being transmitted. This could cause injuries.

– Do not start the engine and allow it to idle in a closed area. Exhaust fumes

are poisonous and can cause loss of consciousness and death. Always provide adequate ventilation while the engine is running.

Do not ride your motorcycle at full load and do not rev up the engine when cold. since the piston warms up and expands faster than the water cooled cylinder, this might cause engine damage. always let engine idle until warm or drive it warm at low r.p.m. speeds.

NOTE: The highly inflammable components in modern fuels volatilize if left standing for longer periods of time. If the motorcycle has not been used for over 1 week, the fuel should be drained from the float chamber. The engine will start up immediately if the float chamber is filled with fresh, ignitable fuel

Starting when the engine is warm

1 Open fuel tap 2 Put the gear in neutral 3 Leave throttle closed and kick down kickstarter vigorously all the way.

What to do when the engine is “flooded“

1 Close fuel tap 2 Start engine with full throttle. If necessary, unscrew spark plug and dry it. 3 Once the engine is running, open fuel tap again.

Starting off

Pull the clutch lever. Put the engine into first gear, slowly release the clutch lever and accelerate at the same time.

Always make sure the side stand is kicked all the way up or the plug-in stand removed before you let your child drive off. The motorcycle could run out of control if the stand touches the ground.

Shifting/Riding

You are now in first gear, referred to as the drive or uphill gear. Depending on the conditions (traffic, hill size, etc.), you can shift to a higher gear. Turn down the throttle, at the same time pull clutch lever in and shift to the next higher gear. Let clutch lever go again and open the throttle. If you turned on the choke, make sure you turn it off again as soon as engine is warm.

+ 29 hidden pages