KTM 125 2011, 200 2011, 250 2011, 300 2011 Owner's manual

OWNER'S MANUAL 2011

125 EXC EU

125 EXC Factory Edition EU

125 EXC SIX DAYS EU

200 EXC EU

200 EXC AUS

200 XC‑W USA

250 EXC EU

250 EXC Factory Edition EU

250 EXC AUS

250 EXC SIX DAYS EU

250 XC‑W USA

300 EXC EU

300 EXC Factory Edition EU

300 EXC AUS

300 EXC SIX DAYS EU

300 XC‑W USA

Art. no. 3211688en

DEAR KTM CUSTOMER 1

DEARKTM CUSTOMER

Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art sports motorcycle that will
give you enormous pleasure if you service and maintain it accordingly.

We wish you a lot of enjoyment in riding this vehicle.

Enter the serial numbers of your vehicle below.

Chassis number ( p. 10) Dealer's stamp

Engine number ( p. 11)

Key number (EXC, EXC Factory Edition, EXC SIX DAYS)

( p. 10)

The owner's manual corresponded to the latest state of this series at the time of printing. Slight deviations resulting from continuing
development and design can, however, not be completely excluded.

All specifications are non-binding. KTM Sportmotorcycle AG specifically reserves the right to modify or delete technical specifica­tions, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt
these to local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery
options, deviations from illustrations and descriptions, as well as misprints and other errors. The models portrayed partly contain spe­cial equipment that does not belong to the regular scope of delivery.

© 2010 KTM-Sportmotorcycle AG, Mattighofen Austria
All rights reserved
Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission of the copyright
owner.

ISO 9001(12 100 6061)
According to the international quality management standard ISO 9001, KTM uses quality assurance processes that lead
to the maximum possible quality of the products.
Issued by: TÜV Management Service

KTM-Sportmotorcycle AG
5230 Mattighofen, Austria

TABLE OF CONTENTS 2

TABLEOF CONTENTS

MEANS OF REPRESENTATION ............................................ 5

IMPORTANT INFORMATION ................................................ 6

VIEW OF VEHICLE............................................................... 8

View of the vehicle from the left front (example) ................. 8

View of the vehicle from the right rear (example) ................ 9

SERIAL NUMBERS............................................................ 10

Chassis number............................................................. 10

Type label..................................................................... 10

Key number (EXC, EXC Factory Edition, EXC SIX DAYS) .... 10

Engine number.............................................................. 11

Fork part number........................................................... 11

Shock absorber part number ........................................... 11

CONTROLS....................................................................... 12

Clutch lever .................................................................. 12

Choke (EXC EU, EXC SIX DAYS, EXC Factory Edition) ....... 12

Hand brake lever ........................................................... 12

Throttle grip.................................................................. 12

Short circuit button (EXC, EXC Factory Edition,

EXC SIX DAYS) ............................................................. 13

Short circuit button (XC-W) ............................................ 13

Light switch (EXC, EXC Factory Edition, EXC SIX DAYS).... 13

Turn signal switch (EXC, EXC Factory Edition,

EXC SIX DAYS) ............................................................. 13

Horn button (EXC, EXC Factory Edition, EXC SIX DAYS) .... 13

Emergency OFF switch (200 EXC AUS) ........................... 14

Emergency OFF switch (250/300 EXC AUS) .................... 14

Electric starter button (All 250/300 EXC EU models,

250/300 XC-W)............................................................. 14

Electric starter button (250/300 EXC AUS)...................... 14

Light switch (XC-W) ....................................................... 14

Overview of indicator lamps (EXC, EXC Factory Edition,

EXC SIX DAYS) ............................................................. 15

Speedometer................................................................. 15

Speedometer activation and test ..................................... 15

Tripmaster switch .......................................................... 15

Setting kilometers or miles ............................................. 16

Setting the clock ........................................................... 16

Adjusting the speedometer functions............................... 17

Querying the lap time .................................................... 17

Display mode SPEED (speed) ......................................... 18

Display mode SPEED/H (service hours) ............................ 18

Display mode SPEED/CLK (clock) ................................... 18

Display mode SPEED/LAP (lap time) ............................... 18

Display mode SPEED/ODO (odometer) ............................. 19

Display mode SPEED/TR1 (trip master 1) ........................ 19

Display mode SPEED/TR2 (trip master 2) ........................ 19

Display mode SPEED/A1 (average speed 1)...................... 20

Display mode SPEED/A2 (average speed 2)...................... 20

Display mode SPEED/S1 (stop watch 1) .......................... 20

Display mode SPEED/S2 (stop watch 2) .......................... 20

Fuel tap........................................................................ 22

Opening the filler cap .................................................... 22

Closing the filler cap...................................................... 23

Choke (EXC AUS, XC-W)................................................. 23

Shift lever..................................................................... 23

Kickstarter.................................................................... 23

Foot brake lever............................................................. 24

Side stand .................................................................... 24

Steering lock (EXC, EXC Factory Edition,

EXC SIX DAYS) ............................................................. 24

Locking the steering (EXC, EXC Factory Edition,

EXC SIX DAYS) ............................................................. 24

Unlocking the steering (EXC, EXC Factory Edition,

EXC SIX DAYS) ............................................................. 25

PUTTING INTO OPERATION............................................... 26

Advice on first use ......................................................... 26

Running in the engine.................................................... 27

Preparing the vehicle for difficult operating conditions...... 27

Preparations for riding on dry sand.................................. 27

Preparations for riding on wet sand ................................. 28

Preparations for riding on wet and muddy surfaces ........... 29

Preparations for riding at high temperatures and low

speeds.......................................................................... 30

Preparations for riding at low temperatures and in snow .... 30

RIDING INSTRUCTIONS .................................................... 31

Checks and maintenance work when preparing for use ...... 31

Starting ........................................................................ 31

Starting up ................................................................... 32

Shifting, riding.............................................................. 32

Braking ........................................................................ 32

Stopping, parking .......................................................... 33

Refueling...................................................................... 33

SERVICE SCHEDULE......................................................... 35

Service schedule ........................................................... 35

Maintenance work (as an additional order) ....................... 36

TUNING THE CHASSIS...................................................... 37

Checking the basic chassis setting with the rider's

weight .......................................................................... 37

Compression damping of shock absorber.......................... 37

Adjusting the high-speed compression damping of the

shock absorber .............................................................. 37

Adjusting the low-speed compression damping of the

shock absorber .............................................................. 38

Adjusting the rebound damping of the shock absorber....... 38

Measuring the sag of the unloaded rear wheel .................. 39

Checking the static sag of the shock absorber .................. 39

Checking the riding sag of the shock absorber .................. 40

Adjusting the spring preload of the shock absorber x ...... 40

Adjusting the riding sag x............................................. 41

Checking the basic setting of the fork.............................. 41

Adjusting the compression damping of the fork ................ 41

Adjusting the rebound damping of the fork....................... 42

Adjusting the spring preload of the fork ........................... 43

Handlebar position ........................................................ 43

Adjusting the handlebar position x................................ 43

MAINTENANCE WORK ON THE CHASSIS ........................... 45

Raising the motorcycle with the lift stand ........................ 45

Removing the motorcycle from the lift stand .................... 45

Bleeding the fork legs .................................................... 45

Cleaning the dust boots of the fork legs ........................... 46

Loosening the fork protection.......................................... 46

Positioning the fork protection ........................................ 46

Removing the fork legs x.............................................. 46

Installing the fork legs x............................................... 47

Removing the fork protector x....................................... 48

Installing the fork protector x ....................................... 48

Removing the lower triple clamp x (EXC EU/AUS)........... 48

Removing the lower triple clamp x (EXC SIX DAYS,

EXC Factory Edition, XC‑W) ............................................ 49

Installing the lower triple clamp x (EXC EU/AUS) ........... 49

Installing the lower triple clamp x (EXC SIX DAYS,

EXC Factory Edition, XC‑W) ............................................ 51

Checking the play of the steering head bearing................. 53

Adjusting the play of the steering head bearing x............ 53

TABLE OF CONTENTS 3

Greasing the steering head bearing x............................. 54

Removing the start number plate (XC-W).......................... 54

Installing the start number plate (XC-W) .......................... 54

Removing the front fender .............................................. 54

Installing the front fender............................................... 55

Removing the shock absorber x..................................... 55

Installing the shock absorber x ..................................... 55

Removing the seat ......................................................... 56

Mounting the seat ......................................................... 56

Removing the air filter box lid......................................... 57

Installing the air filter box lid.......................................... 57

Removing the air filter x............................................... 57

Installing the air filter x ............................................... 57

Cleaning the air filter and air filter box x........................ 58

Removing the main silencer............................................ 58

Installing the main silencer ............................................ 59

Changing the glass fiber yarn filling of the main

silencer x ................................................................... 59

Removing the fuel tank x ............................................. 59

Installing the fuel tank x .............................................. 60

Checking the chain for dirt ............................................. 61

Cleaning the chain......................................................... 61

Checking the chain tension ............................................ 62

Checking the chain, rear sprocket, engine sprocket and

chain guide................................................................... 62

Adjusting the chain tension ............................................ 64

Adjusting the chain guide x.......................................... 65

Checking the throttle cable routing.................................. 65

Adjusting the basic position of the clutch lever................. 66

Checking the fluid level of the hydraulic clutch ................ 66

Changing the hydraulic clutch fluid x ............................ 67

BRAKES........................................................................... 69

Checking free travel of hand brake lever........................... 69

Adjusting the basic position of the hand brake lever

(XC-W).......................................................................... 69

Adjusting free travel of hand brake lever (EXC,

EXC Factory Edition, EXC SIX DAYS) ............................... 69

Checking the brake discs................................................ 70

Checking the front brake fluid level ................................. 70

Adding front brake fluid x ............................................ 70

Checking the front brake linings...................................... 71

Changing the front brake linings x................................. 72

Checking free travel of foot brake lever ............................ 73

Adjusting basic position of foot brake lever x.................. 73

Checking the rear brake fluid level .................................. 74

Adding brake fluid for the rear brake x .......................... 74

Checking the rear brake linings ....................................... 75

Removing the rear brake linings x ................................. 75

Installing the rear brake linings x.................................. 76

Changing the rear brake linings x.................................. 76

WHEELS, TIRES ............................................................... 78

Removing the front wheel x .......................................... 78

Installing the front wheel x........................................... 78

Removing the rear wheel x ........................................... 79

Installing the rear wheel x ............................................ 79

Checking the tire condition............................................. 80

Checking the tire air pressure ......................................... 81

Checking the spoke tension ............................................ 81

ELECTRICAL SYSTEM ....................................................... 83

Removing the battery x (All 250/300 models) ................ 83

Installing the battery x (All 250/300 models)................. 83

Recharging the battery x (All 250/300 models) .............. 83

Removing the main fuse (All 250/300 models)................. 84

Installing the main fuse (All 250/300 models) ................. 84

Removing the headlight mask with the headlight (EXC,

EXC Factory Edition, EXC SIX DAYS) ............................... 85

Refitting the headlight mask with the headlight (EXC,

EXC Factory Edition, EXC SIX DAYS) ............................... 85

Changing the headlight bulb (EXC, EXC Factory Edition,

EXC SIX DAYS) ............................................................. 86

Checking the headlight setting (EXC,

EXC Factory Edition, EXC SIX DAYS) ............................... 86

Adjusting the headlight range (EXC, EXC Factory Edition,

EXC SIX DAYS) ............................................................. 87

Changing the speedometer battery .................................. 87

COOLING SYSTEM ............................................................ 88

Cooling system .............................................................. 88

Checking the antifreeze and coolant level ........................ 88

Checking the coolant level.............................................. 89

Draining the coolant x.................................................. 89

Refilling with coolant x ................................................ 90

TUNING THE ENGINE ....................................................... 92

Checking the play in the throttle cable............................. 92

Adjusting the play in the throttle cable x ....................... 92

Carburetor .................................................................... 92

Carburetor - adjusting the idle speed x .......................... 93

Emptying the carburetor float chamber x ....................... 94

Checking the basic position of the shift lever.................... 94

Adjusting the basic position of the shift lever x .............. 94

Engine characteristic - auxiliary spring

(All 250/300 models) .................................................... 95

Engine characteristic - adjusting the auxiliary spring x

(All 250/300 models) .................................................... 95

MAINTENANCE WORK ON THE ENGINE............................. 97

Checking the gear oil level.............................................. 97

Changing the gear oil x ................................................ 97

Draining the gear oil x ................................................. 98

Refilling with gear oil x ................................................ 98

Adding gear oil x ......................................................... 99

CLEANING, CARE ........................................................... 100

Cleaning the motorcycle ............................................... 100

Protection for winter operation ...................................... 101

STORAGE ....................................................................... 102

Storage....................................................................... 102

Putting into operation after storage ............................... 102

TROUBLESHOOTING....................................................... 103

TECHNICAL DATA - ENGINE ............................................ 105

All 125 models ........................................................... 105

All 200 models ........................................................... 105

All 250 models ........................................................... 106

All 300 models ........................................................... 106

Capacity - transmission oil............................................ 107

Capacity - coolant........................................................ 107

TECHNICAL DATA - ENGINE TIGHTENING TORQUES ........ 108

All 125/200 models .................................................... 108

All 250/300 models .................................................... 108

TECHNICAL DATA - CARBURETOR................................... 110

All 125 models ........................................................... 110

200 EXC EU ............................................................... 110

200 EXC AUS ............................................................. 110

200 XC‑W USA ........................................................... 110

All 250 EXC EU models ............................................... 111

250 EXC AUS ............................................................. 111

TABLE OF CONTENTS 4

250 XC‑W USA ........................................................... 111

All 300 EXC EU models ............................................... 111

300 EXC AUS ............................................................. 112

300 XC‑W USA ........................................................... 112

Carburetor configuration (All 125 models) x................. 112

Carburetor configuration (All 200 models) x................. 114

Carburetor configuration (All 250 models) x................. 115

Carburetor configuration (All 300 models) x................. 116

General carburetor configuration x .............................. 117

TECHNICAL DATA - CHASSIS .......................................... 118

Lighting equipment ..................................................... 119

Tires .......................................................................... 119

Capacity - fuel............................................................. 119

TECHNICAL DATA - FORK................................................ 120

All 125/200 models .................................................... 120

All 250/300 models .................................................... 120

TECHNICAL DATA - SHOCK ABSORBER ........................... 122

All 125/200 models .................................................... 122

All 250/300 models .................................................... 122

TECHNICAL DATA - CHASSIS TIGHTENING TORQUES ...... 124

SUBSTANCES................................................................. 125

AUXILIARY SUBSTANCES................................................ 127

STANDARDS................................................................... 129

INDEX ............................................................................ 130

MEANS OF REPRESENTATION 5

Symbols used

The symbols used are explained below.

Indicates an expected reaction (e.g., to a work step or a function).

Indicates an unexpected reaction (e.g., to a work step or a function).

All work marked with this symbol requires specialist knowledge and technical understanding. In the interest of
your own safety, have these jobs done in an authorized KTM workshop! There, your motorcycle will be serviced
optimally by specially trained experts using the specialist tools required.

Identifies a page reference (more information is provided on the specified page).

Formats used

The typographical and other formats used are explained below.

Specific name Identifies a specific name.

®

Name

Brand™ Identifies a brand available on the open market.

Identifies a protected name.

IMPORTANT INFORMATION 6

Use definition (EXC, EXC Factory Edition, EXC SIX DAYS)

KTM sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles com­ply with currently valid regulations and categories of the top international motorsport organizations.

Info

The motorcycle is authorized for public road traffic in the homologous (reduced) version only.
In the derestricted version, the motorcycle must be used only on closed off property remote from public road traffic.
The motorcycle is designed for offroad sport endurance competition (Enduro) and not for predominant motocross use.

Use definition (XC-W)

KTM sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles com­ply with currently valid regulations and categories of the top international motorsport organizations.

Info

The motorcycle must be used only on closed off property remote from public road traffic.
The motorcycle is designed for offroad sport endurance competition (Enduro) and not for predominant motocross use.

Service

A prerequisite for perfect operation and prevention of wear is that the engine and chassis service, care and adjustment work described
in the owner's manual is properly carried out. Poor adjustment and tuning of the engine and chassis can lead to damage and breakage
of components.
Using the motorcycle in difficult conditions such as on sand or very muddy or wet terrain can lead to above-average wear of compo­nents such as the transmission train or the brakes. For this reason, it may be necessary to service or replace worn parts before the
limit specified in the service schedule is reached.
Pay careful attention to the prescribed running-in period and service intervals. If you observe these exactly, you will ensure a much
longer service life for your motorcycle.

Warranty

The work prescribed in the service schedule must be carried out in an authorized KTM workshop only and confirmed in the customer's
service record, since otherwise no warranty claims will be honored. No warranty claims can be considered for damage resulting from
manipulations and/or alterations to the vehicle.

Fuel, oils, etc.

You should use the fuels, oils and greases according to specifications as listed in the owner's manual.

Spare parts, accessories

For your own safety, only use spare parts and accessory products that have been approved and/or recommended by KTM and have
them installed by an authorized KTM workshop. KTM accepts no liability for other products and any resulting damage or loss.
Certain spare parts and accessories are specified in parentheses in the descriptions. Your KTM dealer will be glad to advise you.

You will find the current KTM PowerParts for your vehicle on the KTM website.
International KTM Website: http://www.ktm.com

Work rules

Special tools are needed for certain tasks. They are not included with the vehicle but can be ordered under the number in parenthe­ses. E.g.: bearing puller (15112017000)
When the vehicle is assembled, non-reusable parts (e.g., self-locking screws and nuts, gaskets, seal rings, O-rings, splints, lock wash­ers) must be replaced with new parts.
Where thread lockers are used on screw connections (e.g., Loctite®), follow the instructions for use from the manufacturer.
After disassembly, clean the parts that are to be reused and check them for damage and wear. Replace damaged or worn parts.
After you complete the repair or maintenance work, check the roadworthiness of the vehicle.

Transport

Note

Danger of damage The parked vehicle may roll away or fall over.

– Always place the vehicle on a firm and even surface.

IMPORTANT INFORMATION 7

Note

Fire hazard Some vehicle components become very hot when the vehicle is operated.

– Do not park the vehicle near flammable or explosive substances. Do not place objects on the vehicle while it is still warm from

being run. Always let the vehicle cool first.

– Switch off the engine.
– Turn handle  of the fuel tap to the OFF position.
– Use straps or other suitable devices to secure the motorcycle against accidents or falling over.

Environment

Motorcycling is a wonderful sport and we naturally hope that you can enjoy it to the full. However, it is a potential problem for the
environment and can lead to conflicts with other persons. But if you use your motorcycle responsibly, you can ensure that such prob­lems and conflicts do not have to occur. To protect the future of motorcycle sport, make sure that you use your motorcycle legally, dis­play environmental consciousness, and respect the rights of others.

Notes/warnings

Pay close attention to the notes/warnings.

Info

Various information and warning labels are affixed to the vehicle. Do not remove information/warning labels. If they are miss­ing, you or others may not recognize potential hazards and may therefore be injured.

Grades of risks

Danger

Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures
are not taken.

Warning

Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.

Caution

Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.

Warning

Identifies a danger that will lead to environmental damage if the appropriate measures are not taken.

Owner's manual

– It is important that you read this owner's manual carefully and completely before making your first trip. It contains information and

tips that will assist you in operating and handling your motorcycle properly. Only then will you learn how to adjust the motorcycle
to your own requirements and how to protect yourself from injury. The owner's manual also contains important information on ser­vicing the motorcycle.

– The owner's manual is an important component of the motorcycle and should be handed over to the new owner if the vehicle is

sold.

VIEW OF VEHICLE 8

3.1View of the vehicle from the left front (example)

1 Hand brake lever
2 Short circuit button
3 Clutch lever
4 Air filter box lid
5 Fuel tap
6 Shift lever
7 Chain guide
8 Side stand

601153-01

VIEW OF VEHICLE 9

3.2View of the vehicle from the right rear (example)

1 Shock absorber rebound adjustment
2 Level viewer for brake fluid, rear
3 Foot brake lever
4 Kickstarter
5 Bleeder screw, fork leg
6 Throttle grip
7 Chassis number
8 Filler cap

601154-10

SERIAL NUMBERS 10

4.1Chassis number

(XC-W)

The chassis number  is stamped on the right side of the steering head.

B00015-10

(EXC, EXC Factory Edition, EXC SIX DAYS)

The chassis number  is stamped on the right side of the steering head.

303438-10

4.2Type label

(XC-W)

The type label  is fixed to the front of the steering head.

400284-10

(EXC, EXC Factory Edition, EXC SIX DAYS)

The type label  is fixed to the front of the steering head.

303439-10

4.3Key number (EXC, EXC Factory Edition, EXC SIX DAYS)

The key number  for the steering lock is stamped onto the key connector.

500125-10

SERIAL NUMBERS 11

4.4Engine number

The engine number  is stamped on the left side of the engine under the engine
sprocket.

B00016-10

4.5Fork part number

The fork part number  is stamped on the inner side of the fork stub.

4.6Shock absorber part number

B00265-01

The shock absorber part number  is stamped on the top of the shock absorber above
the adjusting ring on the engine side.

500083-10

CONTROLS 12

5.1Clutch lever

(All 125/200 models)

The clutch lever  is fitted on the left side of the handlebar.
The clutch is hydraulically operated and self-adjusting.

B00001-10

(All 250/300 models)

The clutch lever  is fitted on the left side of the handlebar.
The clutch is hydraulically operated and self-adjusting.

B00009-10

5.2Choke (EXC EU, EXC SIX DAYS, EXC Factory Edition)

The choke lever  is fitted on the left side of the handlebar.
Activating the choke function frees an opening through which the engine can draw
extra fuel. This gives a richer fuel-air mixture, which is needed for a cold start.

Info

If the engine is warm, the choke function must be deactivated.

Possible states

500136-10

5.3Hand brake lever

400196-10

• Choke function activated – The choke lever is pulled to the stop.

• Choke function deactivated – The choke lever is pushed back to the stop.

Hand brake lever  is located on the right side of the handlebar.
The hand brake lever is used to activate the front brake.

5.4Throttle grip

Throttle grip  is fitted on the right side of the handlebar.

B00060-10

CONTROLS 13

5.5Short circuit button (EXC, EXC Factory Edition, EXC SIX DAYS)

Short circuit button  is fitted on the left side of the handlebar.

Possible states

• Short circuit button in basic position – In this position, the ignition circuit is
closed, and the engine can be started.

• Short circuit button pressed – In this position, the ignition circuit is interrupted,
a running engine stops, and a non-running engine will not start.

B00078-10

5.6Short circuit button (XC-W)

Short circuit button  is fitted on the left side of the handlebar.

Possible states

• Short circuit button in basic position – In this position, the ignition circuit is
closed, and the engine can be started.

• Short circuit button pressed – In this position, the ignition circuit is interrupted,
a running engine stops, and a non-running engine will not start.

B00002-10

5.7Light switch (EXC, EXC Factory Edition, EXC SIX DAYS)

The light switch  is fitted on the left side of the handlebar.

Possible states

Light off – Light switch is turned to the right. In this position, the light
is switched off.

Low beam on – Light switch is in the central position. In this position,
the low beam and tail light are switched on.

High beam on – Light switch is turned to the left. In this position, the

B00082-10

5.8Turn signal switch (EXC, EXC Factory Edition, EXC SIX DAYS)

high beam and the tail light are switched on.

Turn signal switch  is fitted on the left side of the handlebar.

Possible states

Turn signal off – The turn signal switch is in the central position.
Left turn signal, on – The turn signal switch is turned to the left.

Right turn signal, on – The turn signal switch is turned to the right.

B00088-10

5.9Horn button (EXC, EXC Factory Edition, EXC SIX DAYS)

The horn button  is fitted on the left side of the handlebar.

Possible states

• Horn button in neutral position

• Horn button pressed – The horn is operated in this position.

B00083-10

CONTROLS 14

5.10Emergency OFF switch (200 EXC AUS)

The emergency OFF switch  is fitted on the right side of the handlebar.

Possible states

Ignition off – In this position, the ignition circuit is interrupted, a run­ning engine stops, and a non-running engine will not start.

Ignition on – In this position, the ignition circuit is closed, and the
engine can be started.

B00087-10

5.11Emergency OFF switch (250/300 EXC AUS)

The emergency OFF switch  is fitted on the right side of the handlebar.

Possible states

Ignition off – In this position, the ignition circuit is interrupted, a run­ning engine stops, and a non-running engine will not start.

Ignition on – In this position, the ignition circuit is closed, and the
engine can be started.

B00079-10

5.12Electric starter button (All 250/300 EXC EU models, 250/300 XC-W)

The electric starter button  is fitted on the right side of the handlebar.

Possible states

• Electric starter button in basic position

• Electric starter button pressed – In this position, the electric starter is actuated.

B00080-10

5.13Electric starter button (250/300 EXC AUS)

The electric starter button  is fitted on the right side of the handlebar.

Possible states

• Electric starter button in basic position

• Electric starter button pressed – In this position, the electric starter is actuated.

5.14Light switch (XC-W)

B00081-10

Light switch  is located to the right of the speedometer.

Possible states

• The light switch has no function when the vehicle is delivered – It can be used to
retrofit the vehicle with a lighting system.

500146-10

CONTROLS 15

5.15Overview of indicator lamps (EXC, EXC Factory Edition, EXC SIX DAYS)

Possible states

High beam indicator lamp lights up blue – High beam is switched on.

Turn signal indicator lamp flashes green – Turn signal light is switched
on.

500147-01

5.16Speedometer

– Press the key to change the display mode or change to one of the Setup menus.
– Press the key to control different functions.
– Press the key to control different functions.

Info

When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes
are activated.

400312-01

5.17Speedometer activation and test

400313-01

400314-01

Activating the speedometer

The speedometer is activated when one of the keys is pressed or an impulse comes
from the wheel speed sensor.

Display test

For the function test of the display, all display segments light up briefly.

WS (wheel size)
After the display function test, the wheel size WS is displayed briefly.

Info

The number 2205 mm equals the circumference of the 21" front wheel with a
series production tire.

The display then changes to the last selected mode.

5.18Tripmaster switch

(Option: Tripmaster switch)

You can use the trip master switch to control the functions of the speedometer from the handlebar.

Info

The trip master is an optional accessory.

CONTROLS 16

5.19Setting kilometers or miles

Info

If you change the unit of measure, the ODO value is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.

Condition

The motorcycle is stationary.
– Press the button briefly and repeatedly until H appears at the bottom right of the

display.

– Press the button for 3 - 5 seconds.

The Setup menu is displayed and the active functions are shown.

– Press the button repeatedly until the Km/h/Mph display flashes.
Adjusting Km/h

– Press the button .

Adjusting Mph

400329-01

– Press the button .

– Press the button for 3 - 5 seconds.

The settings are stored and the Setup menu is closed.

Info

If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.

5.20Setting the clock

400330-01

Condition

The motorcycle is stationary.
– Press the button briefly and repeatedly until CLK appears at the bottom right of

the display.

– Press the button for 3 - 5 seconds.

The hour display flashes.

– Set the hour display with the button and/or button .
– Press the button briefly.

The next segment of the display flashes and can be set.

– You can set the following segments in the same way as the hours by pressing the

button and the button .

Info

The seconds can only be set to zero.

– Press the button for 3 - 5 seconds.

The settings are stored and the Setup menu is closed.

Info

If no button is pressed for 20 seconds, or if a pulse arrives from the wheel
speed sensor, the settings are stored automatically and the Setup menu is
closed.

CONTROLS 17

5.21Adjusting the speedometer functions

Info

When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.

Condition

The motorcycle is stationary.
– Press the button briefly and repeatedly until H appears at the bottom right of the

display.

– Press the button for 3 - 5 seconds.

The Setup menu is displayed and the activated functions are shown.

– Change to the desired function by pressing the button briefly.

The selected function flashes.

Activating a function

– Press the button .

400318-01

Deactivating the function

– Press the button .

– All desired functions are activated or deactivated accordingly.
– Press the button for 3 - 5 seconds.

The symbol remains on the screen and the display changes to the next
function.

The symbol on the screen goes out and the display changes to the next
function.

The settings are stored and the Setup menu is closed.

5.22Querying the lap time

Info

This function can be called only if lap times are measured.

Condition

The motorcycle is stationary.
– Press the button briefly and repeatedly until LAP appears at the bottom right of

the display.

– Press the button briefly.

– Laps 1-10 can be displayed by pressing the button .
– The button has no function
– Press the button briefly.

400321-01

Info

If no button is pressed for 20 seconds, or if a pulse arrives from the wheel
speed sensor, the settings are stored automatically and the Setup menu is
closed.

LAP 1 appears on the left side of the display.

Next display mode

Info

If an impulse is received from the wheel speed sensor, the left side of the
display changes back to the SPEED mode.

CONTROLS 18

5.23Display mode SPEED (speed)

– Press the button briefly and repeatedly until SPEED appears on the left side of

the display.

The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.

Info

Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer

400317-02

5.24Display mode SPEED/H (service hours)

400316-01

display changes to the SPEED mode and the current speed is shown.

Condition

• The motorcycle is stationary.

– Press the button briefly and repeatedly until H appears at the bottom right of the

display.

In display mode H, the service hours of the engine are displayed.
The service hour counter stores the total traveling time.

Info

The service hour counter is necessary for ensuring that maintenance work is car­ried out at the right intervals.
If the speedometer is in H display mode at the start of the journey, it automati­cally changes to the ODO display mode.
The H display mode is suppressed during the journey.

5.25Display mode SPEED/CLK (clock)

400319-01

5.26Display mode SPEED/LAP (lap time)

Press the button . No function
Press the button . No function
Press the button

for 3 - 5 seconds.
Press the button

The display changes to the Setup menu of the speedometer
functions.

Next display mode

briefly.

– Press the button briefly and repeatedly until CLK appears at the bottom right of

the display.

The time is displayed in CLK display mode.

Press the button . No function
Press the button . No function
Press the button

The display changes to the Setup menu of the clock.

for 3 - 5 seconds.
Press the button

Next display mode

briefly.

– Press the button briefly and repeatedly until LAP appears at the bottom right of

the display.

In the LAP display mode, up to 10 lap times can be timed with the stop watch.

400320-01

Info

If the lap time continues after you press the button , 9 memory locations are
already occupied.
Lap 10 must be timed with the button .

Press the button . Starts or stops the clock.
Press the button . Stops the current lap time and saves it, and the stop watch

starts the next lap.

CONTROLS 19

5.27Display mode SPEED/ODO (odometer)

400317-01

5.28Display mode SPEED/TR1 (trip master 1)

Press the button

The stop watch and the lap time are reset.

for 3 - 5 seconds.
Press the button

Next display mode

briefly.

– Press the button briefly and repeatedly until ODO appears at the bottom right of

the display.

The total distance traveled is displayed in the ODO display mode.

Press the button . No function
Press the button . No function
Press the button

–

for 3 - 5 seconds.
Press the button

Next display mode

briefly.

– Press the button briefly and repeatedly until TR1 appears at the top right of the

display.

TR1 (trip master 1) runs constantly and counts to 999.9.
You can use it to measure trips or the distance between refueling stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).

400323-01

5.29Display mode SPEED/TR2 (trip master 2)

400324-01

Info

If 999.9 is exceeded, the values of TR1, A1 and S1 are automatically reset to

0.0.

Press the button . No function
Press the button . No function
Press the button

The TR1, A1 and S1 displays are reset to 0.0.

for 3 - 5 seconds.
Press the button

Next display mode

briefly.

– Press the button briefly and repeatedly until TR2 appears at the top right of the

display.

TR2 (trip master 2) runs constantly and counts up to 999.9.
The displayed value can be set manually with the button and the button . This is a
very practical function when riding using the road book.

Info

The TR2 value can also be corrected manually during the journey with the but­ton and the button .
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.

Press the button . Increases value of TR2.
Press the button . Reduces value of TR2.
Press the button

Deletes value of TR2.

for 3 - 5 seconds.
Press the button

Next display mode

briefly.

CONTROLS 20

5.30Display mode SPEED/A1 (average speed 1)

– Press the button briefly and repeatedly until A1 appears at the top right of the

display.

A1 (average speed 1) shows the average speed calculated on the basis of TR1 (trip mas­ter 1) and S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.

Press the button . No function

400325-01

5.31Display mode SPEED/A2 (average speed 2)

Press the button . No function
Press the button

The TR1, A1 and S1 displays are reset to 0.0.

for 3 - 5 seconds.
Press the button

Next display mode

briefly.

– Press the button briefly and repeatedly until A2 appears at the top right of the

display.

A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.

400326-01

5.32Display mode SPEED/S1 (stop watch 1)

400327-01

Info

The displayed value can differ from the actual average speed if S2 was not
timed after the ride.

Press the button . No function
Press the button . No function
Press the button

for 3 - 5 seconds.
Press the button

briefly.

– Press the button briefly and repeatedly until S1 appears at the top right of the

display.

S1 (stop watch 1) displays the journey time on the basis of TR1 and continues when an
impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends 3 seconds after the last impulse.

Press the button . No function
Press the button . No function
Press the button

for 3 - 5 seconds.
Press the button

briefly.

–

Next display mode

Displays of TR1, A1 and S1 are reset to 0.0.

Next display mode

5.33Display mode SPEED/S2 (stop watch 2)

400328-01

– Press the button briefly and repeatedly until S2 appears at the top right of the

display.

S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.

Press the button . Starts or stops S2.
Press the button . No function
Press the button

Displays of S2 and A2 are reset to 0.0.

for 3 - 5 seconds.
Press the button

Next display mode

briefly.

CONTROLS 21

Table of functions
Display Press the button . Press the button . Press the button for 3 -

5 seconds.

Display mode SPEED/H
(service hours)

Display mode SPEED/CLK
(clock)

Display mode SPEED/LAP
(lap time)

Display mode
SPEED/ODO (odometer)

Display mode SPEED/TR1
(trip master 1)

Display mode SPEED/TR2
(trip master 2)

Display mode SPEED/A1
(average speed 1)

Display mode SPEED/A2
(average speed 2)

Display mode SPEED/S1
(stop watch 1)

Display mode SPEED/S2
(stop watch 2)

No function No function The display changes to

the Setup menu of the
speedometer functions.

No function No function The display changes to

the Setup menu of the
clock.

Starts or stops the
clock.

No function No function – Next display mode

No function No function The TR1, A1 and S1 dis-

Increases value of TR2. Reduces value of TR2. Deletes value of TR2. Next display mode

No function No function The TR1, A1 and S1 dis-

No function No function – Next display mode

No function No function Displays of TR1, A1 and

Starts or stops S2. No function Displays of S2 and A2

Stops the current lap
time and saves it, and
the stop watch starts
the next lap.

The stop watch and the
lap time are reset.

plays are reset to 0.0.

plays are reset to 0.0.

S1 are reset to 0.0.

are reset to 0.0.

Press the button
briefly.

Next display mode

Next display mode

Next display mode

Next display mode

Next display mode

Next display mode

Next display mode

Table of conditions and menu activation
Display The motorcycle is

stationary.

Display mode SPEED/H (service hours) •
Display mode SPEED/CLK (clock) •
Display mode SPEED/LAP (lap time) •
Display mode SPEED/TR1 (trip master 1) •
Display mode SPEED/TR2 (trip master 2) •
Display mode SPEED/A1 (average speed 1) •
Display mode SPEED/A2 (average speed 2) •
Display mode SPEED/S1 (stop watch 1) •
Display mode SPEED/S2 (stop watch 2) •

Menu can be acti­vated

CONTROLS 22

5.34Fuel tap

The fuel tap is on the left side of the fuel tank.
Tap handle  on the fuel tap is used to open or close the supply of fuel to the carbure­tor.

Possible states

• Fuel supply closed OFF – No fuel can flow from the tank to the carburetor.

• Fuel supply open ON – Fuel can flow from the tank to the carburetor. The fuel tank
empties down to the reserve.

• Reserve fuel supply open RES – Fuel can flow from the tank to the carburetor. The
fuel tank empties completely.

601157-10

5.35Opening the filler cap

Danger

Fire hazard Fuel is highly flammable.

– Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no

fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.

– Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See the notes on refueling.

Warning

Danger of poisoning Fuel is poisonous and a health hazard.

– Avoid contact between fuel and skin, eyes and clothing. Do not inhale fuel vapors. If fuel gets into your eyes, rinse immedi-

ately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If fuel is swallowed, con­tact a doctor immediately. Change clothing that has come into contact with fuel. Store fuel in a suitable canister according
to regulations and keep it out of the reach of children.

Warning

Environmental hazard Improper handling of fuel is a danger to the environment.

– Do not allow fuel to get into the ground water, the ground, or the sewage system.

– Press release button , turn the filler cap counterclockwise and lift it free.

303520-10

CONTROLS 23

5.36Closing the filler cap

– Replace the filler cap and turn clockwise until the release button  locks in place.

Info

Run the fuel tank breather hose  without kinks.

303521-10

5.37Choke (EXC AUS, XC-W)

The choke lever  is fitted on the left side of the carburetor.
Activating the choke function frees an opening through which the engine can draw
extra fuel. This gives a richer fuel-air mixture, which is needed for a cold start.

Info

If the engine is warm, the choke function must be deactivated.

Possible states

B00004-10

• Choke function activated – The choke lever is pulled out all the way.

• Choke function deactivated – The choke lever is pushed in all the way.

5.38Shift lever

5.39Kickstarter

Shift lever  is mounted on the left side of the engine.

B00005-10

The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.

B00005-12

The kickstarter  is fitted on the right side of the engine. The top part can be
swiveled.

B00006-10

CONTROLS 24

5.40Foot brake lever

Foot brake lever  is located in front of the right footrest.
The foot brake lever is used to activate the rear brake.

B00007-10

5.41Side stand

The side stand  is on the left side of the vehicle.

B00085-10

The side stand is used to park the motorcycle.

Info

When you are riding, side stand  must be folded up and secured with rubber
band .

B00086-10

5.42Steering lock (EXC, EXC Factory Edition, EXC SIX DAYS)

Steering lock  is fitted on the left side of the steering head.
The steering lock is used to lock the steering. Steering, and therefore riding, is no
longer possible.

B00084-10

5.43Locking the steering (EXC, EXC Factory Edition, EXC SIX DAYS)

Note

Danger of damage The parked vehicle may roll away or fall over.

– Always place the vehicle on a firm and even surface.

– Park the vehicle.
– Turn the handlebar as far as possible to the right.
– Insert the key in the steering lock, turn it to the left, press it in and turn it to the

right. Remove the key.

Steering is no longer possible.

Info

Never leave the key in the steering lock.

400732-01

CONTROLS 25

5.44Unlocking the steering (EXC, EXC Factory Edition, EXC SIX DAYS)

– Insert the key in the steering lock, turn it to the left, pull it out and turn it to the

right. Remove the key.

You can now steer the bike again.

Info

Never leave the key in the steering lock.

400731-01

PUTTING INTO OPERATION 26

6.1Advice on first use

Danger

Danger of accidents Danger arising from the rider's judgement being impaired.

– Do not operate the vehicle while under the influence of alcohol, drugs and certain medications or physically or mentally

impaired.

Warning

Risk of injury Missing or poor protective clothing present an increased safety risk.

– Wear protective clothing (helmet, boots, gloves, pants and jacket with protectors) every time you ride the vehicle. Always

wear protective clothing, which must be undamaged and meet legal requirements.

Warning

Danger of crashing Poor vehicle handling due to different tire tread patterns on front and rear wheels.

– The front and rear wheels must be fitted with tires with similar tread patterns to prevent loss of control over the vehicle.

Warning

Danger of accidents Critical riding behavior due to inappropriate riding.

– Adapt your riding speed to the road conditions and your riding ability.

Warning

Danger of accidents Accident risk caused by presence of a passenger.

– Your vehicle is not designed to carry passengers. Do not ride with a passenger.

Warning

Danger of accidents Failure of brake system.

– If the foot brake lever is not released, the brake linings drag continuously. The rear brake may fail due to overheating. Take

your foot off the foot brake lever when you are not braking.

Warning

Danger of accidents Unstable riding behavior.

– Do not exceed the maximum permissible weight and axle loads.

Warning

Risk of misappropriation Usage by unauthorized persons.

– Never leave the vehicle while the engine is running. Secure the vehicle against use by unauthorized persons.

Info

When using your motorcycle, remember that others may feel disturbed by excessive noise.

– Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.

You receive a delivery certificate and the service record at vehicle handover.

– Before your first trip, read the entire operating instructions carefully.
– Get to know the controls.
– Adjust the basic position of the clutch lever. ( p. 66)

(XC-W)

– Adjust the basic position of the hand brake lever. ( p. 69)

(EXC, EXC Factory Edition, EXC SIX DAYS)

– Adjust the free travel of the hand brake lever. ( p. 69)

–

Adjust the basic position of the foot brake lever. x ( p. 73)

–

Adjust the basic position of the shift lever. x ( p. 94)

– Get used to handling the motorcycle on a suitable piece of land before making a longer trip.

Info

Offroad, you should be accompanied by another person on another machine so that you can help each other.

– Try also to ride as slowly as possible and in a standing position to get a better feeling for the vehicle.
– Do not make any offroad trips that over-stress your ability and experience.

PUTTING INTO OPERATION 27

– Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
– If you carry any baggage, make sure it is fixed firmly as close as possible to the center of the vehicle and ensure even weight dis-

tribution between the front and rear wheels.

Info

Motorcycles react sensitively to any changes of weight distribution.

– Do not exceed the overall maximum permitted weight and the axle loads.

Guideline

Maximum permissible overall weight 335 kg (739 lb.)
Maximum permissible front axle load 145 kg (320 lb.)
Maximum permissible rear axle load 190 kg (419 lb.)

– Check the spoke tension. ( p. 81)

Info

The spoke tension must be checked after riding the motorcycle for one half hour.

– Run the engine in.

6.2Running in the engine

– During the running-in phase, do not exceed the specified engine performance.

Guideline

Maximum engine performance

During the first 3 service hours < 70 %
During the first 5 service hours < 100 %

– Avoid fully opening the throttle!

6.3Preparing the vehicle for difficult operating conditions

– The use of motorcycles under difficult operating conditions can lead to above-average wear of components such as the drive train

or brakes. For this reason, it may be necessary to service or replace worn parts before the limit specified in the service schedule is
reached.

Difficult operating conditions are:

– Riding on dry sand. ( p. 27)
– Riding on wet sand. ( p. 28)
– Riding on wet and muddy surfaces. ( p. 29)
– Riding at high temperatures and low speeds. ( p. 30)
– Riding at low temperatures and in snow. ( p. 30)

6.4Preparations for riding on dry sand

– Check the radiator cap.

Value on the radiator cap 1.8 bar (26 psi)

» If the displayed value does not equal the setpoint value:

Warning

Danger of scalding During motorcycle operation, the coolant gets

very hot and is under pressure.

600872-10

– Do not remove the radiator cap, radiator hoses or other cooling

system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.

– Change the radiator cap.

–

Seal the air filter box. x

Tip

Seal the air filter box at the edges to prevent dirt from entering.

PUTTING INTO OPERATION 28

–

Clean the air filter and air filter box. x ( p. 58)

Info

Check the air filter approx. every 30 minutes.

– Mount the dust cover for the air filter.

Dust cover for air filter (59006019000)

Info

Read the KTM PowerParts installation instructions.

600869-01

– Mount the dust cover for the air filter for sand.

Sand cover for air filter (59006022000)

Info

Read the KTM PowerParts installation instructions.

– Adjust the carburetor jetting and setting.

600871-01

600868-01

6.5Preparations for riding on wet sand

600872-10

Info

Recommendations on the carburetor setting are available from your autho­rized KTM workshop.

– Clean the chain.

Chain cleaner ( p. 127)

– Mount the steel sprocket.

Tip

Do not grease the chain.

– Clean the radiator fins.
– Carefully align bent radiator fins.
– If used in sand regularly, replace the piston every 10 operating hours.

– Check the radiator cap.

Value on the radiator cap 1.8 bar (26 psi)

» If the displayed value does not equal the setpoint value:

Warning

Danger of scalding During motorcycle operation, the coolant gets

very hot and is under pressure.

– Do not remove the radiator cap, radiator hoses or other cooling

system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.

– Change the radiator cap.

–

Seal the air filter box. x

Tip

Seal the air filter box at the edges to prevent dirt from entering.

–

Clean the air filter and air filter box. x ( p. 58)

Info

Check the air filter approx. every 30 minutes.