KT&C KVR-0412H User Manual

Standalone Digital Video Recorder

Premium DVR

4, 8, 16 Channel Models

User`s Manual

KM2115DKQCN

This document contains preliminary information and is subject to change without notice.

MADE IN KOREA

DKQ3_K

FCC Compliance Statement

Notice to Users

This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at own expense.

CAUTION

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

ATTENTION

DES CHANGEMENTS OU DES MODIFICATIONS NON EXPRESSEMENT APPROUVEES PAR LE RESPONSABLE DE LA CONFORMITE POURRAIENT ANNULER L'AUTORISATION DE L'UTILISATEUR A EXPLOITER L'EQUIPEMENT.

The equipment complies with the requirement of FCC CFR 47 PART 15 SUBPART B, Class A.

Explanation of Graphical Symbols

This symbol indicates the presence of important operating and maintenance (servicing) instruction in the literature accompanying the product.

Ce symbole indique la présence d’instructions importantes et de maintenances dans le manuel accompagnant le produit

This symbol indicates the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Ce symbole indique la présence de « haute tension » non-isolé dans le produit qui peut avoir pour conséquence un risque de la décharge électrique aux personnes.

Warnings

 Installation and servicing should be performed only by qualified and experienced personnel.  Power off the DVR when connecting cameras, audio, or sensor cables.  The manufacturer is not responsible for any damage caused by improper use of the product or failure to follow instructions for

the product.

 The manufacturer is not responsible for any problems caused by or resulting from the user physically opening the DVR for

examination or attempting to fix the unit.

 The manufacturer may not be held liable for any issues with the unit if any labels are removed in the product.

Cautions

 This product has free voltages (100V ~ 240V). See installation instructions before connecting to the power supply.  This product uses a Lithium battery.  To avoid any risk of explosion, do not replace the battery on the main board by anything other than a Lithium battery.  Dispose of used batteries according to the manufacturer’s instructions.  This equipment and all communication wirings are intended for indoor use only.  To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.

WEEE(Waste Electrical and Electronic Equipment)

Important Safeguards

1. Read Instructions

 To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.

2. Retain Instructions

 The safety and operating instructions should be retained for future reference.

3. Cleaning

 Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for

cleaning.

4. Attachments

 Never add any attachments and/or equipment without manufacturer approval as such additions may result in the risk of fire,

electric shock, or other personal injury.

5. Water and/or Moisture

 Do not use this equipment near water or in contact with water.

6. Accessories

 Do not place this equipment on an unstable cart, stand or table. The equipment may fall, causing serious injury to a child or

adult and serious damage to the equipment.

 Wall or shelf mounting should follow the manufacturer’s instructions and should use a mounting kit approved by the

manufacturer.

Customers in European Union countries are advised to dispose this product, at the end of its useful life, as per applicable local laws, regulations and procedures.

 Move this equipment and cart combination with care. Quick stops, excessive force and uneven surfaces may cause the

equipment and cart combination to overturn.

7. Power Sources

 This equipment should be operated only from the type of power source indicated on the marking label. If not sure the type of

power, please consult to distributor or local power company.

8. Power Cords

 Operator or installer must remove power, BNC, alarm and other connections before moving the equipment.

9. Lightning

 For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the equipment due to lightning and power-line surges.

10. Overloading

 Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.

11. Objects and Liquids

 Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock.

 Never spill liquid of any kind on the equipment.

12. Servicing

 Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel.

13. Damage Requiring Service

 Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:

① When the power-supply cord or the plug has been damaged. ② If liquid is spilled or objects have fallen into the equipment. ③ If the equipment has been exposed to rain or water. ④ If the equipment does not operate normally by following the operating instructions, adjust only those controls that are

covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the equipment to its normal operation.

⑤ If the equipment has been dropped or damaged the cabinet. ⑥ When the equipment exhibits a distinct change in performance—this indicates a need for service.

14. Replacement Parts

 When replacement parts are required, ensure the service technician uses replacement parts specified by the manufacturer

or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

15. Safety Check

 Upon completion of any service or repairs to this equipment, ask the service technician to perform safety checks to

determine that the equipment is in proper operating condition.

16. Field Installation

 This installation should be made by a qualified service person and should conform to all local codes.

17. Correct Batteries

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

ATTENTION

RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UN TYPE INCORRECT DISPOSEZ DE BATTERIES EN ACCORS AVEC LES INSTRUCTIONS



18. Operating Temperature

 An operating temperature range is specified so that the customer and installer may determine a suitable operating

environment for the equipment.

19. Elevated Operating Ambient Temperature

 If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be

greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the specified operating temperature range.

20. Reduced Air Flow

 Installation of the equipment in the rack should be such that the amount of airflow required for safe operation of the

equipment is not compromised.

21. Mechanical Loading

 Mounting of the equipment in the rack should be such that a hazardous condition is not caused by uneven mechanical

22. Circuit Overloading

 Consideration should be given to connection of the equipment to supply circuit and the effect that overloading of circuits

might have on over-current protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

23. Grounding (Earthing)

 Connection of ground wire is highly recommended to protect the DVR from external electric shock, such as lightening,

electrical surge.

Warning

WARRANTY IS VOID IF SEAL OR LABEL IS REMOVED OR DAMAGED.

The List of Configuration

A and E (4CH) Type : 4 / 8 / 16CH

B and E (8, 16CH) Type : 4 / 8 / 16CH

DVR Set

C, D, F, G, H and I Type : 4 / 8 / 16CH

Manual / CMS CD

Remote Controller

Manual

Screws

HDD Brackets

Rack Bracket

(Except A, B and D Type)

Data Cable

Power Cable

Adapter

Operation Precautions

 Power Off

 Do not turn DVR off, or plug off the power adapter while DVR is in operation (record/playback). Otherwise, it may cause

permanent damage to the equipment. Please click ( ) SETUP>SYSTEM>Shutdown sequentially and then remove the power after DVR is shut down completely. It is safe to wait for 5 seconds before turning the power on again.

 Do not turn DVR off, or plug off the power adapter while External storage device (e.g., USB memory stick, removable

external hard disk and the like) in use. Otherwise, it may cause permanent damage to the equipment. Make sure that the power switch is in the “ON” position until data storage is completed. Please be aware that removing the storage device cause the same damage to the equipment.

 Do not turn DVR off, or plug off the power adapter during the format of the hard disk. Otherwise, it may cause permanent

damage to the equipment. Make sure that the power switch is in the “ON” position until the formatting of the disk is completed.

 HDD Installation / Addition / Moving / Replacement / Removal

 For installation/addition/replacement/Removal of HDD (DVD-RW), make sure that DVR is turned off. Otherwise, it may

cause permanent damage to the HDD (DVD-RW).

 When wish to power DVR off, please click ( ) SETUP>SYSTEM>Shutdown sequentially and then remove the power after

DVR is shut down completely.

 Installation/Addition/Moving/Replacement: Start ‘HDD initialization’ including formatting. Otherwise, DVR would not

recognize the hard disk and may begin to function abnormally. Please follow the below procedure for ‘HDD initialization’.

① (Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time). ② (Initialization of system setup) All setup values are restored to original factory default settings.

(SETUP>SYSTEM>Information>Status>Setup>Default).

③ (HDD format) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs,

each must be formatted, separately. When the format is completed, DVR will auto-reboot.

 Removal: Follow the Remove procedure even when a pre-installed hard disk has been removed.

- SETUP>SYSTEM>Admin>Storage>Format, click ( ) ‘Removed’ item under the discrete Format headings of a corresponding HDD to discard ‘HDD’ item. When the Remove procedure is completed, DVR will auto-reboot.

 Date / Time Change

 Any change in Date/Time is immediately applied onto live video (LIVE), but the date/time when the recording was done are

not changed.

 Make sure to reboot DVR after adjusting the Date/Time.  Also, do not forget to execute SETUP>SYSTEM>Shutdown in sequence before reboot.

 Upgrade

 Do not upgrade until install a hard disk drive. Make sure that upgrade when the hard disk drive is in proper operation.

 Using a Mouse

 Left mouse button: have the same function as Enter ( ) on the Front panel of DVR.  Central button (wheel): have the same function as Search key on the Front panel of DVR(display search menu).  Right mouse button: display a number of ‘Function keys’ (please see ‘Input Device and Screen Icons>Using a mouse’ in

this manual).

 PLAY / PAUSE Key

 Press the PLAY/PAUSE key to one-touch playback on the viewing screen (playback the recorded video from the last one

minute).

 Every time pressing the PLAY/PAUSE key during playback mode, it is changed to ‘1X PLAY’ and ‘PAUSE’. The displayed

sign on the screen also changes from to II.

 If wish to change mode (1X PLAY, REW, FF, BACKWARD, FORWARD) during playback, always press the PLAY/PAUSE

key first (please see if the sign II is shown on the screen).

 Press the PLAY/PAUSE key to back up. Make sure that the backup is done in ‘PAUSE’ mode.

 Camera Title

 Camera Title displayed in Record and Playback modes of DVR is set to CAM1 ~CAM16. Registering camera title in setup

menu (DEVICES>Camera/PTZ>Title) is to make every setup process easier.

Table of Contents

1. PRODUCT FEATURES ............................... 11

1.1 Unpacking ....................................................... 11

1.2 Service ............................................................ 11

4.2.3 Account ......................................................... 40

4.2.4 System Log ................................................... 43

4.2.5 Exit ................................................................ 43

4.2.6 Shutdown ...................................................... 43

1.3 System Connection Diagram ........................ 11

2. INSTALLATION .......................................... 21

2.1 Hard disk and DVD-RW Installation ............. 21

2.1.1 SATA Port .................................................... 21

2.1.2 Internal SATA Storage ................................. 21

2.1.3 e-SATA External Storage ............................. 22

2.1.4 HDD Installation ........................................... 22

2.1.5 Maximum HDD Capacity .............................. 22

2.1.6 DVD-RW Installation .................................... 23

2.2 Connector Wiring ........................................... 24

2.2.1 Video-In/Loop Out Connections ................... 24

2.2.2 HD-SDI Camera Input Format ...................... 24

2.2.3 HD-SDI Input Signal detection ..................... 24

2.2.4 Monitor Connections .................................... 24

2.2.5 HDMI Connections ....................................... 25

2.2.6 Audio Connections ....................................... 25

2.2.7 TCP/IP(Ethernet) Connections ..................... 25

2.2.8 Alarm Connections(TTL) .............................. 25

2.2.9 Master Alarm ................................................ 25

2.2.10 Alarm Connections (Relay (Dry Contact)) . 26

2.2.11 RS-485/422 Connections .......................... 26

2.2.12 RS-485 Over Coax Connection ................. 26

2.2.13 USB Connections ...................................... 26

2.2.14 RS-232 Connections ................................. 26

2.2.15 Grounding (Earthing) ................................. 26

2.2.16 Factory Reset Switch ................................. 26

2.2.17 Power Supply Connections ....................... 27

2.2.18 Connections Guideline .............................. 27

3. INPUT DEVICE AND SCREEN ICONS ...... 28

3.1 Key and LEDs ................................................. 28

3.2 Camera Select Keys for 16 Channel DVR .... 30

3.3 Front Panel ..................................................... 31

3.4 Using a Remote Controller ............................ 31

4.3 DISPLAY .......................................................... 44

4.3.1 OSD .............................................................. 44

4.3.2 Main Monitor ................................................. 45

4.3.3 Multi Spot ...................................................... 46

4.3.4 Video In / Out ................................................ 47

4.4 DEVICES .......................................................... 47

4.4.1 Network ......................................................... 48

4.4.2 Camera / PTZ ............................................... 52

4.4.3 Audio ............................................................. 53

4.4.4 Alarm In ........................................................ 53

4.4.5 Alarm Out ...................................................... 54

4.4.6 Serial In ......................................................... 54

4.5 RECORD .......................................................... 55

4.5.1 Setting ........................................................... 55

4.5.2 Schedule ....................................................... 59

4.5.3 Pre Alarm ...................................................... 60

4.5.4 Motion Detection ........................................... 61

4.5.5 Holiday .......................................................... 62

4.6 LINK .................................................................. 62

4.6.1 Alarm In ........................................................ 62

4.6.2 Motion Event ................................................. 63

4.6.3 Video Loss .................................................... 64

4.6.4 Serial In ......................................................... 64

4.6.5 System Event ................................................ 65

4.6.6 Popup Link .................................................... 65

5. OPERATION INSTRUCTION ...................... 66

5.1 Viewing ............................................................ 66

5.1.1 First Image .................................................... 66

5.1.2 View Format .................................................. 67

5.1.3 Digital Zoom .................................................. 67

5.1.4 Freeze Live Image ........................................ 67

5.1.5 Pan / Tilt Control ........................................... 67

5.1.6 System Log ................................................... 69

5.1.7 Key Lock ....................................................... 69

5.1.8 Emergency Recording .................................. 69

3.5 Using a Mouse ................................................ 32

3.6 Screen Icon ..................................................... 32

4. SETUP ......................................................... 33

4.1 Login / Logout ................................................ 33

4.2 SYSTEM .......................................................... 34

4.2.1 Information ................................................... 34

4.2.2 Admin ........................................................... 37

5.2 Search .............................................................. 69

5.2.1 Date / Time Search ....................................... 70

5.2.2 Calendar Search ........................................... 70

5.2.3 Event Search ................................................ 71

5.3 Playback .......................................................... 72

5.4 One-touch Playback ....................................... 73

5.5 Digital Zoom in Playback ............................... 73

5.6 Archive ............................................................. 73

5.7 Menu Bar ......................................................... 74

7. ICMS VIEWER ........................................... 114

5.8 Alarm Out Control .......................................... 75

6. CMS PRO .................................................... 77

6.1 CMS Pro Features .......................................... 77

6.1.1 Introduction .................................................. 77

6.1.2 Features ....................................................... 77

6.1.3 System Requirements .................................. 77

6.2 Installation ...................................................... 78

6.2.1 Software Installation ..................................... 78

6.2.2 Login ............................................................ 79

6.3 Menu ................................................................ 80

6.4 Setup ............................................................... 81

6.4.1 Local Setup - Device .................................... 81

6.4.2 Device Group Setup ..................................... 83

6.4.3 Local Setup - Environment ........................... 84

6.4.4 Local Setup - Account .................................. 87

6.4.5 Local Setup – E-map .................................... 88

6.4.6 Remote Device Setup .................................. 90

6.4.7 Change Password ........................................ 91

6.4.8 Help .............................................................. 91

6.5 View ................................................................. 91

6.5.1 Server List .................................................... 91

6.5.2 Remote Device System Log ......................... 92

6.5.3 Remote Device Event Log ............................ 92

6.5.4 CMS System Log ......................................... 93

6.5.5 Health Check ................................................ 94

6.5.6 Show All Windows ........................................ 95

6.6 Application ...................................................... 96

6.6.1 Search .......................................................... 96

6.6.2 Exit ............................................................... 96

6.7 Live (Live Video Monitoring System) ........... 97

6.7.1 Overview ...................................................... 97

6.7.2 Live Monitor Menu ........................................ 97

6.7.3 Screen Layout Control ................................ 104

6.7.4 Change Division Display ............................ 104

6.7.5 Sequencing ................................................ 105

6.7.6 Audio Volume Control ................................ 105

7.1 System Recommendations .......................... 114

7.2 Program Installation ..................................... 114

7.3 Login .............................................................. 115

7.4 Watch Mode ................................................... 116

7.4.1 Log-in Screen ............................................. 116

7.4.2 Local Setting ............................................... 116

7.5 Live View........................................................ 120

7.5.1 Connection .................................................. 120

7.5.2 Display Mode .............................................. 120

7.5.3 Health Check .............................................. 121

7.5.4 PTZ Control ................................................ 122

7.5.5 System Log ................................................. 123

7.6 Search Mode ................................................. 123

7.6.1 Date/Time Search ....................................... 123

7.6.2 Event Search .............................................. 124

7.6.3 POS/ATM .................................................... 125

7.7 Disconnection ............................................... 126

7.8 Uninstall ......................................................... 127

8. XCMS VIEWER ......................................... 129

8.1 Program Installation ..................................... 129

8.1.1 System Recommendations ......................... 129

8.1.2 Program Installation Method ....................... 129

8.2 Login .............................................................. 130

8.3 Watch Mode ................................................... 130

8.3.1 Login Screen ............................................... 130

8.3.2 Local Setting ............................................... 131

8.3.3 Live ............................................................. 134

8.4 Search Mode ................................................. 137

8.4.1 Date/Time Search ....................................... 137

8.4.2 Event Search .............................................. 138

8.4.3 POS/ATM .................................................... 139

8.5 Disconnection ............................................... 140

8.6 Uninstall ......................................................... 141

6.8 Search ........................................................... 106

6.8.1 Overview .................................................... 106

6.8.2 Time Bar Search ........................................ 106

6.8.3 Event Search .............................................. 108

6.8.4 POS/ATM Search ....................................... 108

6.8.5 Thumbnail Search ...................................... 109

6.8.6 Smart Search ............................................. 109

6.9 E-Map ............................................................ 110

6.9.1 Overview .................................................... 110

6.9.2 Controls ...................................................... 110

6.9.3 E-map Camera – Instant Playback ............. 110

6.9.4 Alarm In/Out Control ................................... 111

6.9.5 Audio .......................................................... 111

6.10 Uninstalling CMS Pro ................................. 112

9. CMS WEB CLIENT PRO ........................... 143

9.1 System Requirements .................................. 143

9.2 Setup and Login ............................................ 143

9.3 Live Display ................................................... 144

9.4 Search Screen ............................................... 145

9.5 PTZ Control ................................................... 146

9.6 Capture .......................................................... 147

10. CMS MOBILE VIEWER ............................. 149

10.1 iPhone Mobile .............................................. 149

10.1.1 System Requirements .............................. 149

10.1.2 Installation ................................................ 149

10.1.3 Site Registration ...................................... 151

10.1.4 Connection .............................................. 152

10.1.5 Live View (Portrait View) ......................... 152

10.1.6 Live View (Landscape View) ................... 153

10.1.7 PTZ Control ............................................. 153

10.1.8 Search ..................................................... 154

10.1.9 Snapshot Galler y ..................................... 155

10.1.10 Setting ................................................... 156

10.1.11 Uninstallation ......................................... 156

10.2 iPad Mobile .................................................. 158

10.2.1 System Requirements ............................. 158

10.2.2 Installation ............................................... 158

10.2.3 Site Registration ...................................... 160

10.2.4 Connection .............................................. 160

10.2.5 Live View (Portrait View) ......................... 161

10.2.6 Live View (Landscape View) ................... 162

10.2.7 PTZ Control ............................................. 162

10.2.8 Search ..................................................... 163

10.2.9 Snapshot Galler y ..................................... 164

10.2.10 Setting ................................................... 165

10.2.11 Uninstallation ......................................... 165

10.3 Android Phone (mViewer Pro) ................... 166

10.3.1 System Requirements ............................. 166

10.3.2 Installation ............................................... 166

10.3.3 Site Registration ...................................... 167

10.3.4 Connection .............................................. 168

10.3.5 Live View (Portrait View) ......................... 168

10.3.6 Live view (Landscape View) .................... 169

10.3.7 PTZ control .............................................. 170

10.3.8 Alarm Out Control .................................... 171

10.3.9 Search ..................................................... 171

10.3.10 Snapshot Gallery ................................... 172

10.3.11 Setting ................................................... 173

10.3.12 Uninstallation ......................................... 173

10.4 Android Phone ............................................ 174

10.4.1 System Requirements ............................. 174

10.4.2 Installation ............................................... 174

10.4.3 Site Registration ...................................... 175

10.4.4 Connection .............................................. 176

10.4.5 Search ..................................................... 177

10.4.6 Audio ....................................................... 177

10.4.7 PTZ control .............................................. 178

10.4.8 Information .............................................. 178

10.4.9 Disconnection .......................................... 179

10.4.10 Uninstall ................................................. 179

10.5 Blackberry Mobile ....................................... 180

10.5.1 System Requirements ............................. 180

10.5.2 Installation ............................................... 180

10.5.3 Site Registration ...................................... 180

10.5.4 Connection .............................................. 181

10.5.5 PTZ Control ............................................. 182

10.5.6 Disconnection .......................................... 183

10.5.7 Uninstallation ........................................... 183

11. KEYBOARD CONTROLLER .................... 185

11.1 Connection ................................................... 185

11.1.1 Configuration Diagram ............................. 185

11.1.2 USB Connection ...................................... 185

11.2 Keyboard Setup in DVR .............................. 185

11.3 Keyboard Configuration ............................. 186

11.4 Setup ............................................................. 187

11.4.1 DVR Control Mode ................................... 187

11.4.2 Speed Dome Setup .................................. 188

11.4.3 Joystick Calibration .................................. 188

11.5 Operation ...................................................... 188

11.5.1 DVR/SPD Mode Conversion .................... 188

11.5.2 DVR Control Mode ................................... 188

11.5.3 SPD Control Mode (Speed Dome) ........... 190

12. SERIAL IN (POS) ...................................... 193

12.1 Usage of Serial-In Function ........................ 193

12.2 Connection Method ..................................... 193

12.3 Connection Diagram ................................... 193

12.4 Link ............................................................... 195

12.4.1 Link Setup ................................................ 195

12.4.2 Schedule Setup ........................................ 196

12.5 Setup ............................................................. 196

12.5.1 Title .......................................................... 196

12.5.2 Port Setting .............................................. 197

12.5.3 OSD Display ............................................ 197

12.5.4 Pattern Setting ......................................... 197

12.6 Search ........................................................... 200

13. HD-SDI VIDEO SIGNAL ACCESSORIES . 203

13.1 HSC1100 ....................................................... 203

13.1.1 Introduction .............................................. 203

13.1.2 Features ................................................... 203

13.1.3 Technical Specification ............................ 203

13.1.4 Unpacking ................................................ 203

13.1.5 Service ..................................................... 203

13.1.6 System Dimension Diagram ..................... 203

13.1.7 System Connection Diagram ................... 204

13.1.8 Cable ........................................................ 204

13.1.9 Display ..................................................... 204

13.2 HSC1200 ....................................................... 205

13.2.1 Introduction .............................................. 205

13.2.2 Features ................................................... 205

13.2.3 Technical Specification ............................ 205

13.2.4 Unpacking ................................................ 205

13.2.5 Service ..................................................... 205

13.2.6 System Dimension Diagram ..................... 205

13.2.7 Connector Wiring ..................................... 206

13.2.8 Cable ........................................................ 206

13.2.9 Operation Key and Screen Display Information 206

13.3 HSC2110 ...................................................... 207

13.3.1 Introduction .............................................. 207

13.3.2 Features .................................................. 207

13.3.3 Technical Specification .............................. 207

13.3.4 Unpacking ............................................... 207

13.3.5 Service .................................................... 207

13.3.6 System Dimension Diagram .................... 207

13.3.7 Connector Wiring ..................................... 208

13.3.8 PTZ Control ............................................. 208

13.3.9 Cable ....................................................... 208

13.3.10 Display ................................................... 209

13.4 HSC2410 ...................................................... 209

13.4.1 Introduction .............................................. 209

13.4.2 Features .................................................. 209

13.4.3 Technical Specification ............................ 209

13.4.4 Unpacking ............................................... 209

13.4.5 Service .................................................... 209

13.4.6 System Dimension Diagram .................... 210

13.4.7 Connector Wiring ..................................... 210

13.4.8 Cable ....................................................... 210

13.4.9 Display ..................................................... 211

13.5 HSR1110 ...................................................... 211

13.5.1 Introduction .............................................. 211

13.5.2 Features .................................................. 211

13.5.3 Technical Specification ............................ 211

13.5.4 Unpacking ............................................... 211

13.5.5 Service .................................................... 211

13.5.6 System Dimension Diagram .................... 212

13.5.7 Connector Wiring ..................................... 212

13.5.8 Cable ....................................................... 212

13.5.9 Display ..................................................... 212

13.6 HSR1440 ...................................................... 213

13.6.1 Introduction .............................................. 213

13.6.2 Features .................................................. 213

13.6.3 Technical Specification ............................ 213

13.6.4 Unpacking ............................................... 213

13.6.5 Service .................................................... 213

13.6.6 System Dimension Diagram .................... 213

13.6.7 Connector Wiring ..................................... 214

13.6.8 Cable ....................................................... 214

13.6.9 Display ..................................................... 214

13.7 HQS1004 ...................................................... 215

13.7.1 Introduction .............................................. 215

13.7.2 Features .................................................. 215

13.7.3 Technical Specification ............................ 215

13.7.4 Unpacking ............................................... 215

13.7.5 Service .................................................... 215

13.7.6 System Dimension Diagram .................... 215

13.7.7 Connector Wiring ..................................... 216

13.7.8 Cable ....................................................... 216

13.7.9 Display ..................................................... 216

13.8 HFO1100 & HFO1200 ................................... 217

13.8.1 Introduction .............................................. 217

13.8.2 Features ................................................... 217

13.8.3 Technical Specification ............................ 217

13.8.4 Unpacking ................................................ 217

13.8.5 Service ..................................................... 217

13.8.6 System Dimension Diagram ..................... 218

13.8.7 Connector Wiring ..................................... 218

13.8.8 Cable ........................................................ 219

13.8.9 Display ..................................................... 219

Product Features

1.1 Unpacking

 This equipment is an electronic appliance, so it should be handled with special care.  After unpacking, please check if all the following items are included.

- DVR Main body

A, B and E(4CH) Type

C, D, E(8, 16CH), G, H and I Type

F Type

- Remote Control With 2 AAA batteries

- Installation CD (CMS Software & User’s Manual)

: Power Supply Adapter (DC 12V, 8.33A) and Power Supply Cable

: Power Supply Adapter (DC 12V, 5A) and Power Supply Cable

: Power Supply Adapter (DC 12V, 6.67A) and Power Supply Cable

1.2 Service

 If there is any problem in the product, please refer servicing to a supplier or a distributor with qualified service personnel.

Warning

WARRANTY IS VOID IF SEAL OR LABEL IS REMOVED OR DAMAGED.

1.3 System Connection Diagram

A Type –4 / 8 / 16 channel Series DVR

B Type –4 / 8 / 16 channel Series DVR

C Type –4 / 8 / 16 channel Series DVR

D Type –4 / 8 / 16 channel Series DVR

E (4CH) Type –4 channel Series HD-SDI DVR

E(8, 16CH) Type –8 / 16 channel Series HD-SDI DVR

F Type –4/ 8/16 channel Series HD-SDI DVR

G Type –4 channel Series HD-SDI DVR

H Type –4 channel Series HD-SDI DVR

I Type – 4 + 4 channel Series Hybrid DVR

2. Installation

2.1 Hard disk and DVD-RW Installation

2.1.1 SATA Port

 When installing HDDs, make sure to connect from SATA 1 Port.  A Type

- Main substrate of this DVR has two SATA port: it is indicated as SATA 1 and 2.

 B and E(8, 16CH) Type

- Main substrate of this DVR has three SATA port: it is indicated as SATA 1, 2 and 3.

- Please mount DVD-RW at the SATA 3 port.

 C, D, F, G, H and I Type

- Main substrate of this DVR has five SATA ports: they are indicated as SATA 1, 2, 3, 4 and SATA 5.

- Please mount DVD-RW at the SATA 4 port.

 E(4CH) Type

- Main substrate of this DVR has one SATA port: it is indicated as SATA 1.

 Up to five SATA devices (HDD and DVD-RW) are able to be connected to the SATA ports in serial; however the devices

must be connected onto correct SATA port.

 Refer to the table below to mount HDDs and DVD-RW.

A Type

Storage SATA 1, 2 Port

4 / 8 / 16 CH DVR

B and E(8, 16CH) Type

4 / 8 / 16 CH DVR

C, D, F, G, H and I Type

4 / 8 / 16 CH DVR

E(4CH) Type

4 / 8 / 16 CH DVR

HDD 1

1 HDD --2 HDD HDD

Storage SATA 1, 2, 3 Port

HDD DVD-RW 1 2 3

1 1 HDD --- DVD-RW 2 1 HDD HDD DVD-RW 2 0 HDD HDD ---

Storage SATA 1, 2, 3, 4, 5 Port

HDD DVD-RW 1 2 3 4 5

1 1 HDD --- --- --- DVD-RW 2 1 HDD HDD --- --- DVD-RW 3 1 HDD HDD HDD --- DVD-RW 4 1 HDD HDD HDD HDD DVD-RW 4 0 HDD HDD HDD HDD ---

Storage

HDD

1 HDD

SATA 1 Port

2.1.2 Internal SATA Storage

 C, D, F, G, H and I Type DVR have 5 internal SATA Ports.  1-4 SATA Port: It is designed to mount HDD. Connect from SATA 1 port when installing HDDs.  5 SATA Port: Please mount DVD-RW.  Only one DVD-RW can be installed among the SATA Ports.

2.1.3 e-SATA External Storage (C, D, E (8, 16CH), F, G, H and I Type)

 These series DVRs have one external SATA Port; the picture above shows external SATA 6 Port.  6 SATA Port: It is designed to mount 4HDDs per each external SATA Port.

2.1.4 HDD Installation

 Securely fix a hard disk by using bracket and screws provided herewith.  Please do not use any different hard disk cables (data cable and power supply cable) other than ones we provide.  Otherwise, it may cause damage to the hard disk.

CAUTION

INSTALL HARD DISK AFTER DVR POWER IS OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HARD DISK. TO TURN OFF DVR, PLEASE CLICK ( ) SETUP>SYSTEM>SHUTDOWN. ALSO, WAIT FOR 5 SECONDS BEFORE PLUGGING IN POWER SUPPLY AGAIN.

CAUTION

 FOR INSTALLATION/ADDITION/REPLACEMENT/REMOVAL OF HDD (DVD-RW), MAKE SURE THAT DVR IS TURNED

OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HDD (DVD-RW)

 INSTALLATION/ADDITION/MOVING/REPLACEMENT: USER SHOULD START ‘HDD INITIALIZATION’ INCLUDING

FORMATTING. OTHERWISE, DVR WON’T RECOGNIZE THE HARD DISK AND MAY BEGIN TO FUNCTION ABNORMALLY. PLEASE FOLLOW THE BELOW PROCEDURE FOR ‘HDD INITIALIZATION’.

①

(DATE/TIME SETUP) SET UP THE CURRENT DATE AND TIME (SETUP>SYSTEM>ADMIN>DATE/TIME)

②

(INITIALIZATION OF SYSTEM SETUP) ALL VALUES IN SETUP ARE RESTORED TO FACTORY DEFAULT SETTINGS.

(SETUP>SYSTEM>INFORMATION>STATUS>SETUP>DEFALUT)

(HDD FORMAT) HDD FORMAT IS DONE BY SETUP>SYSTEM>ADMIN>STORAGE>FORMAT. IF THERE ARE MORE THAN TWO

③

HDDS, EACH MUST BE FORMMATED SEPARATELY. WHEN THE FORMAT IS COMPLETED, DVR WILL AUTO-REBOOT.

 REMOVAL: FOLLOW THE REMOVE PROCEDURE EVEN WHEN A PRE-INSTALLED HARD DISK HAS BEEN

REMOVED. – SETUP>SYSTEM>ADMIN>STORAGE>FORMAT, CLICK

FORMAT HEADINGS OF A CRRESPONDING HDD TO DISCARD ‘HDD’ ITEM. WHEN THE REMOVE PROCEDURE IS COMPLETED, DVR WILL AUTO-REBOOT.

( ) ‘REMOVED’ITEM UNDER THE DISCRETE

2.1.5 Maximum HDD Capacity

 Each model has a different HDD capacity recognition.  Below table shows the recommended maximum HDD capacity for each model.

Type A B C D E F G H I

Capacity 6TB 6TB 16TB 16TB 6TB 16TB 16TB 16TB 16TB

2.1.6 DVD-RW Installation

 Securely fix DVD-RW by using bracket and screws provided herewith.  Please do not use any different DVD-RW cables (data cable and power supply cable) other than the ones we provide.  Otherwise, it may cause damage to the DVD-RW.  Only one DVD-RW can be used. Mount it at the SATA 5 port (B, C, D, E(8, 16CH), F, G, H and I Type).

CAUTION

INSTALL DVD-RW OR/AND HARD DISK AFTER DVR POWER OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HARD DISK. TO TURN OFF DVR, PLEASE CLICK ( ) SETUP>SYSTEM>SHUTDOWN. ALSO, WAIT FOR 5 SECONDS BEFORE PLUGGING IN POWER SUPPLY AGAIN.

2.2 Connector Wiring

2.2.1 Video-In/Loop Out Connections

A, B, C and D Type

 Connect a camera to ‘VIDEO IN’.  If user wishes to link camera input to another device, please connect the camera to ‘LOOP OUT’. (C Type).  Assure the ‘VIDEO IN’ and ‘LOOP OUT’ connections are connected properly, not oppositely.

E, F, G and H Type

 Connect cameras to ‘HD-SDI IN’ to channel 1 to 16.

I Type

 Connect cameras to ‘HD-SDI IN’ to channel 1 to 4.  Connect cameras to ‘VIDEO IN’ to channel 5 to 8.

NOTE

Only C Type model supports LOOP OUT connection.

2.2.2 HD-SDI Camera Input Format (E, F, G, H and I Type)

 HD-SDI recorder shall recognize following HD-SDI signals

- 720P 24, 720P 25, 720P 30, 720P 50, 720P 60, 1080I 50, 1080I 60, 1080P 24, 1080P 25, 1080P 30, 1080P 50 and 1080P 60.

2.2.3 HD-SDI Input Signal detection (E, F, G, H and I Type)

 These type of DVRs will automatically detect the input signals from 720P 24, 720P 25, 720P 30, 720P 50, 720P 60, 1080I 50,

1080I 60, 1080P 24, 1080P 25, 1080P 30, 1080P 50, 1080P 60 (Auto Detection) when the system starts.

 720P and 1080P HD-SDI inputs can be used simultaneously without any restriction on different channel.  1080I input cannot be used simultaneously with 720P and/or 1080P.

2.2.4 Monitor Connections (Video Out, VGA and Multi Spot)

 Video Out (A, B, C, D, G, H and I Type Only)

- Use with the CCTV monitor.

- Connect BNC cable between CCTV monitor and ‘VIDEO OUT’ of the DVR.

 VGA

- Use with the computer monitor.

- Connect VGA cable between computer monitor and ‘VGA’ of the DVR

 Multi Spot (A, B, C, D, G, H and I Type Only)

- This function supports Multi Channel Display on Spot Monitor

- Connect BNC cable between spot monitor and multi spot port of rear panel.

CAUTION

BLACK SCREEN WILL APPEAR IF THE MONITOR DOEST NOT SUPPORT THE SELECTED RESOLUTION. UNLESS USER PRESS ‘OK’ DURING BLACK SCREEN, SYSTEM WILL AUTOMATICALLY GO BACK TO THE PREVIOUS RESOLUTION IN 15 SECONDS.

2.2.5 HDMI Connections

 Connect HDMI cable to HD out port of rear panel and HDMI port of HD output device.  Please click ( ) SETUP> DISPLAY> VGA and the following screen will appear.

 Click the box below to select resolution.

- User can select the resolution among ‘1920x1080 RB’, ‘1920x1080’, ‘1680x1050 RB’, ‘1680x1050’, ‘1280x1024’, and ‘1024x768’

- The default setting of DVR is ‘1280 x 1024’.

 Click the box below to select signal format.

- User can select the signal output among ‘NTSC’, ‘PAL’ and ‘AUTO’.

- The default setting of DVR is ‘AUTO’

CAUTION

HDMI CONNECTION MAY NOT BE COMPATIBLE WITH CERTAIN OUTPUT DEVICE. VIDEO NOISE MAY OCCUR DEPENDING ON THE TYPE OF HDMI CABLE USED. MAKE SURE TO USE AN HDMI-CERTIFIED CABLE

CAUTION

2.2.6 Audio Connections

 Connect an audio device to ‘AUDIO IN’ and a speaker system to ‘AUDIO OUT’. Please use a speaker system with volume

adjustable.

2.2.7 TCP/IP(Ethernet) Connections

 Connect to ‘ETHERNET’ connector with the LAN cable.  When connect to Internet, use an ordinary LAN cable (Non-cross cable). However, when connect directly to a PC, please

use only ‘Crossover cable’.

2.2.8 Alarm Connections(TTL)

 Connect Alarm Input (Sensor) to ‘AI 1~AI 4 (or AI 16)’ connectors and connect Sensor Common to ‘G’ connector.  Connect Alarm Output (buzzer, siren, etc.) to ‘AO 1~AO 4 (or AO 16)’ connectors and connect Common to ‘G’ connector.

2.2.9 Master Alarm

 Alarm In sensor will be deactivated if Master Alarm is on.  Connect Master Alarm In to ‘M’ connectors.

2.2.10 Alarm Connections (Relay (Dry Contact))

 Connect Alarm Output (buzzer, siren, etc.) to ‘NO or NC 1~ NO or NC 2’ connectors, Power to ‘COM’ connector and Ground

to ‘GND’ connector.

2.2.11 RS-485/422 Connections

 PTZ Camera connector.  Please use TX+, TX-, RX+ and RX- terminals.

2.2.12 RS-485 Over Coax Connection (A, B and C Type ONLY)

 PTZ Camera Connector  Please connect Coax to ‘Video In’ and select any Protocol in Camera/PTZ setup..

NOTE

PTZ Camera must support RS-485 over Coax function in order to use this feature.

NOTE

When selecting Protocol, user can choose any protocol from the Protocol list other than ‘NONE’. If ‘NONE’ is selected then RS485 over Coax will not work.

2.2.13 USB Connections

 There are up to four identical USB ports in front and in rear. It is possible to connect a USB memory stick to archive data or

a mouse to control the device.

2.2.14 RS-232 Connections

 This port is not in use for users. Do not connect any devices through this port.

CAUTION

WHEN USING THE RS232 SERIAL PORT, USERS MUST REQUEST FOR ASSISTANT TO QUALIFIED TECHNICAL PERSON OR SERVICE REPRESENTATIVE.

2.2.15 Grounding (Earthing)

 Connection of ground wire is highly recommended to protect the DVR from external electric shock, such as lightening,

electrical surge.

2.2.16 Factory Reset Switch

 Reset the switch to restore all setup values of menus to factory default settings. It is also possible to use to initialize System

Log file.

 The switch is located in a pin hole of the back panel.  Put the clip pin into the switch hole on the monitor (Live) screen and keep pressing until the switch has clicked.

CAUTION

PRESS FACTORY RESET SWICH ONLY IN LIVE MODE NEVER PRESS IN SETUP MODE.

2.2.17 Power Supply Connections

 A, B and E(4CH) Type : Plug the power supply adapter (DC 12V, 5A) which include in this product to ’DC12V’ connector

and plug another side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC). Please do not use any different power supply adapter because it may cause the DVR to malfunction.

 C, D, E(8, 16ch), G, H and I Type : Plug the power supply adapter (DC 12V, 6.67A) which include in this product

to ’DC12V’ connector and plug another side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC). Please do not use any different power supply adapter because it may cause the DVR to malfunction.

 F Type : Plug the power supply adapter (DC 12V, 8.33A) which include in this product to ’DC12V’ connector and plug

another side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC).

 Please do not use any different power supply adapter because it may cause the DVR to malfunction.

2.2.18 Connections Guideline

 Video Out Connector: If only the monitor is connected to VIDEO OUT connector, please set the impedance switch on the

rear side of the monitor to 75 ohms to prevent abnormally bright or collapsed images. If wish to connect another device (e.g., a recorder) to the back of the monitor, please set the impedance switch on the rear side of the monitor to HIGH Z (High Impedance) and set the last device to 75 ohms.

 Alarm Input Connector: Do not input any type of voltage to the AI 1~AI4 (AI 16) connectors.

Input Device and Screen Icons

3.1 Key and LEDs

B and E(8, 16CH) Type

KEYS PTZ KEY Operating mode Setup mode

•Up/Down/Left/Righ

Direction ▲, ▼, ◄, ►

1 ~ 10

11 ~ 16

DISPLAY

SEQUENCE

KT&C KVR-0412H User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual