KT&C KPT-SPDN120HD User Manual

M136-SPDN120HD-002

HD CCTV

12X Optical Mini Speed Dome Camera

OPERATION MANUAL

Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.

Contents

Cautions 3

IMPORTANT SAFETY INSTRUCTION 6

1. Overview 7

1 1 Features 7

1.2 System Conguration 8

1.3 Termination Settings 8

2. Installation and Connection 9

2.1 Package Contents 9

2.2 Installation 10

2.3 Connection Interface and Wiring Cables 11

2.4 Setting Dome Camera 12

3. Program and Operation 13

OSD Menu Structure 13

3.1 Getting Started 16

3.2 Main Menu 17

3.3 System Setup Menu 17

3.4 Display Setup Menu 19

3.5 Camera Setup Menu 22

3.6 Dome Motion Menu 25

3.7 Preset Menu 27

3.8 Pattern Menu 28

3.9 Tour Menu 29

3.10 Auto Scan Menu 30

3.11 Alarm Menu 31

4. Troubleshooting 32

5. Specications 33

6. Dimensions 34

Appendix. Pelco Protocol Function List 35

Camera ID Chart

CAUTION

These servicing instructions are for use by qualied service personnel only.
To reduce the risk of electric shock do not perform any servicing o ther than
that contained in the operating instructions unless you are qualied to do so.

Use Class 2 Power Supply Only

2

Cautions

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including
interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference
at his own expense.”

WARNING

This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

Caution

Any changes or modications in construction of this devices which are not expressly

approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

CAUTION

1. A regulated AC24V 2.5A(With Heater) power supply is recommended for use with
this camera for the best picture and the most stable operation. An unregulated
power supply can cause damage to the camera. When unregulated power supply
is applied, product warranty will be out of subject.

2. It is recommended that the camera is used with a monitor that has a CCTV quality
75 video impedance level. If your monitor is switched to high impedance then
please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal
components. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reective light, which may

cause smear on the picture and possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

6. Do not expose the camera to rain or other types of liquid.

7. The apparatus must be connected to a mains socket-outlet with a protective

earthing connection.

3

Cautions

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with
separate collection systems)

This marking shown on the product or its literature, indicate that it should not be
disposed with other household wastes at the end of its working life. To prevent
possible h ar m to the environm ent or human health fro m uncontrol le d waste
disposal, please separate this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes purchased this

product, or their local government ofce, for details of where and how they can take

item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract.
Household users should contact either the retailer where they for disposal.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).
NO USER. SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL

This symbol is intended to alert the user to the presence of un­insulated “dangerous voltage” within the product’s enclosure

that may be of sufcient magnitude to constitute a risk of electric

shock to persons.

This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in
the literature accompanying the appliance

4

IMPORTANT SAFETY INSTRUCTION

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specied by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to
avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long

periods of time.

14) Refer all servicing to qualied service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

5

1. Overview

1.1 Features

The PTZ Dome shall be quickly to install and be able to offer the services described
in this document by way of an interface unit.
Its mechanical architecture is designed to ensure adequate mechanical attachment
to the wall of a dwelling. Details shall be provided as to how the PTZ Dome is to be
installed.
A building block for any surveillance/security system is composed of PTZ domes and

Controllers. Extensible and exible conguration promotes remote control functions

for various external switching devices such as multiplexers and DVRs

- Autofocus, High Resolution Integrated Color Camera

- 120X Zoom (12X Optical, 10X Digital )

- WDR (Wide Dynamic Range)

- BLC / HSBLC

- DNR (Digital Noise Reduction)

- Day & Night (Auto / BW / Color)

- Pan 360°Endless Rotation

- Tilt 180°Vector scan available

- 210 Preset Positions (except Short-cut command)

- 8 Auto Scan

- 6 Pattern

- 8 Tours consist of Presets, Patterns and Scans

- 4 Alarm Input (Off / NC / NO) and 1 Alarm Output (Off / NC / NO)

- User programmable setting
(Preset, Auto scan, Pattern, Tour, Home Function, Alarm Action, etc)

- Programmable PTZ Speed: Proportional to Zoom ratio, changeable preset speed

- Multi-language OSD Support

- Private Mask Zone Support

- Standard protocol including Pelco-D/P

- Up to 255 Camera ID

- RS-485 Receiver

- AC 24V Only

- IP Rating: IP66 (Weatherproof)

- HDcctv Alliance Base Line Compliance

- The HDcctv Alliance states.

- Look for the unique HDcctv logo to be sure.

•

100m transmissions over even to be sure.

•

Plug-and-Play interoperability with other compliant products.

•

Forward compatibility with future versions of the standard.

•

See www.hidefcctv.org for details.

6

1. Overview

1.2 System Conguration

MULT IP LEXER

1.3 Termination Settings

7

2. Installation and Connection

2.1 Package Contents

Camera Wall Mount Bracket

Operation Manual Screws/Plastic Anchors/Wrench/Washers

/Terminal(AC24V,RS485 and Alram)

Screws(4ea)

Washers(4ea)

Plastic
Anchors(4ea)

Terminal(AC24V)

Terminal(RS485)

Terminal(Alram)

L-wrench

8

2. Installation and Connection

Unit: mm

Option - Ceiling Mount Bracket

116

4-Ø12.5

90

Ø130

4-Ø10

A-type

Approx. 390

B-type

Option - Corner Mount Option - Parapet Mount

628

91

128

150

Option - Pole Mount

Strap Length 720

Approx. 80

1006

9

2. Installation and Connection

2.2 Installation

③

①

②

Screws(4ea)

Washers(4ea)

Connect the Camera Safety Wire

to the Installation Base.

Plastic anchors(4ea)

Safety Wire

10

2. Installation and Connection

2.3 Connection Interface and Wiring cables

* Caution

Do not connect the power cable until all other connections have been completed.
After removing the protection sheet (PE form), supply the power to the dome camera.

2.3.1 Connecting the RS-485 lines

The dome camera can be controlled remotely by an external device or control system such as

a controller using RS-485 half duplexer (RS-485 Connection). A repeater is recommended to

extend over 1.2 Km.

2.3.2 Connecting Video Jack

Connect the video Jack (BNC connector) to the monitor or video input of the DVR.
(Video for HDcctv)
Connect the video Jack (Yellow BNC connector) to the monitor or
video input of the DVR for checking only

2.3.3 Connecting Alarms

Alarm In: You can use external devices to trigger the dome camera to react to events
Mechanical or electrical switches can be wired to the AI and Ground pins
Alarm Out: The dome camera can activate external devices such as buzzer. Connect the device

to NO (or NC) and COM pins.

2.3.4 Connecting the power

Connect the power jack of AC24V adaptor to the dome camera.

Bonding

Signal

Label

Alliance

Label

Caution

Label

(Only AC24V)

11

Bonding

BNC Female

BNC Female

NC
COM
NO
AL3
GND ALM
AL2
AL3
AL0

TRX +
TRX -

Terminal Block(8P)

Terminal Block(2P)

Terminal Block(2P)
AC24V