KNC-p3LR4IR
3MP IR Network Camera
Rugged Low Profile Style with IR
Features
• Omni IP ‘hand free’ Plug-and-Play system: just connect to PoE switch and stream video
• View and record 3MP resolution at up to 20FPS from 1/3” progressive scan CMOS sensor
- 3MP images contain NINE times the pixel detail versus traditional analog images
- At 3X digital zoom, a 3MP images display more detail than a basic analog camera
• Real time 30FPS streaming at 1920x1080 (1080p)/1280x720 (720p)
• Low light sensitivity of .07lux with
- True Day/Night (ICR) for best daytime color reproduction and low/no light sensitivity
- Low/no light coverage enhanced by 10 IR LEDs with 33 foot range
- Smart IR Control of image contrast despite bright, close in objects in scene
• Extensive OSD capabilities, many controlled directly from Omni IP NVR
- Dual streaming in H.264/MJPEG with fixed/variable bandwidth control from 32Kb/s to 12.3Mb/s
- Region of Interest allocates bandwidth to maximize resolution in priority areas within scene
- Day/night and IR switching control by photo sensor or schedule (or disable IRs if desired)
- In-camera detection of motion, video loss or tampering with alarm reporting to NVR
- 3D DNR improves low light image clarity and reduces bandwidth/NVR disk utilization
- DWDR compensates bright or unbalanced scene lighting
- BLC specifically for handling scenes with back lit subjects
• Lens focal length of 4mm covers 70° field of view; optional 2.8mm lens for wider view or 6mm for greater
magnification*
• Dual PoE/12VDC power
• PoE for efficiency and convenience
- 12VDC for legacy system upgrade or beyond PoE cable distance range
- Operate almost anywhere: IP66 weather resistance and -22°F~140°F temperature range
• Low profile housing is adjustable +/- 30° pan, 360° rotatation, and 75° tilt for flexible wall or ceiling mounting;
fits single gang electrical box
• Support for Safari/Chrome/FireFox/IE web browsers with free plug-in
• Customize installation with KA-LRTC1 Threaded Cap for Pendant Mount; KA-LRWM1 Wall Mount (special
order); KA-BRPM1 Pole Mount; KA-BRCM1 Corner Mount for use with KA-LRWM1
3.91” (99.3)
3.81” (96.6)
3.29” (83.5)
* See detailed specs for field of view at different combinations of focal length and resolution
KT&C America, Inc. reserves the right to make changes to improve our products at any time without notice; we are not responsible for misprints.
IP66, POE + 12VDC
2.09” (52.9)
1.45” (36.8)
KA-BRCM1
Corner Mount
KA-LRTC1
Threaded
Cap/Pendant
For Low Profile
KA-BRPM1
Pole Mount
KA-LRWM1
Wall Mount
For Low Profile
*
Special Order
Plug
&
Play
Dual
Stream
3
Mega
pixel
Region
of
Interest
Smart
H.264
IR
True
Day
Night
3D
DNR
IP66
D-WDR
Rugged
Housing
º
-22
PoE+
DC12
ONVIF
F
Technical Specifications
Image Sensor 1/3" Progressive Scan CMOS
Total Pixels (H x V) 2048x1536 3 Megapixel @ Maximum Resolution
Day & Night True Day & Night with ICR; Controllable by light sensor or via schedule
Min. Illumination .07lux @ F1.2, AGC on 0 Lux (IR LED On; IR may be disabled in OSD)
IR LED 10 IR LED 850nm
IR Distance 33 ft. (10m) Nominal IR performance depends on scene reflectivity
Smart IR OSD Controlled Off/On
Shutter Speed 1/30s ~ 1/100,000s
DWDR/BLC DWDR: Off/On, Level Adjust; BLC: Off/Top, Bottom, Left, Right, Center Weighted
White Balance AWB; Locked; Incandescent, Warm, Natural or Fluorescent Light
3D DNR Off/On, Level Adjust
Focal Length (standard)
Lens Options
Lens Angle
Lens Type Fixed focal length
Main Stream 2048x1536 1920x1080 1280x720
Supported Resolutions Sub Stream 320x240 352x240 640x480 704x480
Maximum Frame Rates 20FPS@2048x1536 ; 30FPS@1920x1080 ; 30FPS@1280x720
Compression H.264 Main Profile & MJPEG
Bit Rate
Streaming Dual-Stream at different frame rates and bandwidth
Region of Interest
Image Settings
LAN Ethernet 10/100 Base-T (RJ-45 Type) with weather sealed shell
Security
Protocol
Network Storage Video upload to PC, FTP or NAS
VMS Compatibility ONVIF, PSIA, CGI, ISAPI
Supported Browsers Internet Explorer, Chrome, FireFox, Safari (with O/S compatible plug-in)
Video Motion Detection
Alarm Triggers Intelligent video Motion Detection, Video Loss, Tampering
Alarm Events Notify NVR, send email, upload to FTP, trigger alarm output
SD Card Slot Micro SD / SDHC / SDXC up to 64Gb
Angle Adjustment Pan: -30°-30°, Tilt: 0~75°, Rotation: 0-360°
Power
Interface
Environmental IP66 (Weather Resistant); IK10 Vandal Resistant
Operating Temperature -22 °F ~ 140 °F (-30 °C ~ 60 °C)
Dimension 3.91” x 3.81” x 2.09” (99.3 x 96.6 x 52.9mm)
Other Fits single gang electrical box
Weight .55 lbs./250g
*
Mounting Options
4mm F=2.0,
2.8mm, 6mm
2048 × 1536: Angle of view: 86°(2.8mm), 70°(4mm), 43.3°(6mm)
1920 × 1080: Angle of view: 98.5°(2.8mm), 79°(4mm), 49°(6mm)
Nominal rates from drop down: 1024, 2048, 3072, 4096, 6144, 8192 Kbps Customized rates:
32Kbps~12288Kbps
Image detail priority/enhancement for up to four user defined areas for main and/or sub
stream
Brightness, Contrast, Saturation, Sharpness, Hue, AGC Gain, Image rotation/mirror, 50/60Hz
system, Text overlay (Name, Time/Date, Fixed Labels; adjustable for position, size, color, etc.),
Privacy masking
Multiple user access levels with password protection; Watermarking of captured video IP
address filter; IEEE802.1X (Authentication)
IPv4, IPv6, HTTP, TCP/IP, ICMP, DHCP, DNS, DDNS, RTP, RSTP, RTCP, uPnP, IGMP, PPPoE, SMTP, NTP,
SNMP, HTTPS, FTP, 802.1X, QoS, Bonjour
With arming schedule and multiple actions: notify NVR, send email, upload to FTP, trigger
alarm output
PoE class 3 (IEEE 802.3af)
12VDC +/- 10%
5W nominal; 7W IR LED on
8P/8C RJ-45F for Network and PoE
Power (DC 12V) Input
KA-LRTC1 Threaded Cap for Pendant Mount; KA-LRWM1 Wall Mount (special order); KA-BRPM1
Pole Mount; KA-BRCM1 Corner Mount for use with KA-LRWM1
www.ktncusa.com
Ordering Info: KNC-LR3IR: 2.8mm | KNC-LR4IR: 4mm | KNC-LR6IR: 6mm