KEZ-c2DR28V12
1080p HD Over Regular Coax or UTP
Outdoor Dome: Digital Day/Night, OSD
2.8-12mm, IP68, -40°, Dual Voltage
KEZ-c2DR28V12: 2.8-12mm
KEZ-c2DR28V12
1080p HD Over Regular Coax or UTP
Outdoor Dome: Digital Day/Night, OSD
2.8-12mm, IP68, -40°, Dual Voltage
Features
• Superlative HD resolution of 1080p Full HD or 720p HD for amazing image quality and
- useful digital zoom on live view and playback
- Field select 1080p or 720p
- Field select 30/25 Hz or 60/50 Hz
• Operation over ‘almost any’ wire
- More than 1000 feet on standard RG59 coax
- More than 1500 feet on RG6
- More than 500 feet on UTP (one pair from a Cat5e cable, using optional KA-HDBAL1 balun pair).
• HD-TVI HD BNC main output
• CVBS analog service video output inside housing
- Use standard hand held test monitors
- Convenient aim and focus; ease of service
• 1/3” Sony progressive scan CMOS sensor with .5 lux native light sensitivity
• Varifocal Aspheric 2.8~12mm 2 Megapixel lens to capture the desired field of view
• Digital Day/Night low light operation plus Digital Slow Shutter low light enhancement
• Simple and easy to use OSD setup menu
- Local 3-axis joystick inside access cover
- Up-the-cable control from OMNI EZHD recorders (or other compatible Coaxitron® control equipment)
- Digital Wide Dynamic Range to handle the most challenging of bright or unbalanced lighting conditions
- Programmable Back Light Compensation (BLC) and Highlight Suppression Back Light Compensation (HSBLC)
- Adjustable 3D Noise Reduction to increase low light picture clarity and conserve DVR HDD disk space
- Privacy masking for 8 configurable zones
- Lens shading compensation for even exposure out to the lens periphery
- Defog improves image contrast in the presence of haze or smoke that obscures image details
- Image H/V flip and rotate, digital zoom and more
• Dual voltage 24VAC/12VDC operation with low current draw
• IP68 water proof, vandal proof construction
• Operating temperature range of -40°F~140°F
• Easy mounting using 3-Axis positioning for convenient wall or ceiling mounting
- Optional KA-RCMP1 for mounting to standard electrical boxes
- Optional KA-RCWM1 wall mounting arm
*DSS levels above 4X should be used only after careful consideration of scene dynamics
KT&C America reserves the right to make changes to improve our products at any time without notice; we are not responsible for misprints.
KA-RCMP1
Optional
Electrical Box
Mounting Plate
Technical Specifications
Imaging Device 1/3" Sony 2.1Mp Progressive Scan CMOS
Video Format Main Output: 1080p30/25, 720p60/50 HD-TVI (OSD selectable)
Secondary Output: CVBS (OSD selectable NTSC/PAL) service video test point
Picture Elements 1984 (H) x 1105 (V)
Effective Picture Elements 1920 (H) x 1080 (V)
Horizontal Resolution More than 1080 HTVL (in 1080p mode)
Sensitivity .5 lux @ F1.6 (AGC On)
Day/Night Type Digital Day/Night
Lens Type 2 Megapixel Varifocal Type 2.8~12mm F=1.6
Video Output Connector Type TVI and CVBS: BNC 75Ω
Test Video: CVBS video test point inside access cover, cable to BNC supplied
Sync. Mode Internal
OSD Menu Multiple functions using 3-axis joystick inside housing; UTC Control
OSD Languages English, Spanish, Portuguese, German, Russian, Japanese, French
UTC Control Full OSD Menu access via up-the-cable (Coaxitron® type ) signaling
DWDR / BLC / HSBLC OFF/WDR/BLC/HSBLC Selectable Adjustable for Level 1~10; also BLC area, HLC
color.
Auto Gain Control OFF; 2~42dB
Electronic Shutter Auto; FLK; or Manual 1/30 (25) to 1/30,000
White Balance Auto / Push Lock / Manual
Color Correction Gamma 0.45~.65, adjustable
Day & Night Digital D/N; Optional color-only and B/W only modes under OSD control
Sens-Up DSS low light boost Off/Auto 2X~16X*
3D-DNR Off/Low/Mid/High
Digital Zoom 1X~8X
Defog Off/Low/Mid/High
Mirror Off / H-flip, V-flip, rotate
Motion Detection Off/On for programmable zone with sensitivity adjust (pixel change detection)
Privacy Mask Off/On with full programmability for 8 selectable zones
Lens Shading Compensation) Off/Low/Mid/High
DPC (Defective Pixel Correction) Off/On
Other OSD Functions Camera Title with position, Font Color; Image Sharpness
Power Source 12VDC/24VAC
Power Consumption 12VDC: 230mA, 24VAC: 2.5W
Operating Temperature -40 °F ~ 140 °F (-40 °C ~ 60 °C)
Environmental IP68 water proof
Mechanical Vandal proof metal construction
Positioning 3-axis flexible positioning for wall or ceiling mounting
Dimensions Ø5.24” × 4.4” [Ø133 × 111.8mm]
Weight 1.6 lbs./.725 Kg
Mounting Options Electrical box adapter: KA-RCMP1; Wall mount arm with ring: KA-WM101
Certifications CE / FCC / RoHS
www.ktncusa.com
KEZ-c2DR28V12: 2.8-12mm