KT&C KEZ-c2BR5M50XIR Specsheet

HD-TVI
KEZ-c2BR5M50XIR
2 Megapixel / 1080p @30 FPS, 5-50mm Motorized Auto-Focus Varifocal Lens, Super Beam 390+ EXIR Range, IP66, UTC/OSD, with Dual TVI & SD Video Output.
UTC (Up The Cable)
OSD Control
Features
HD-TVI HD BNC output, plus CVBS analog BNC output for alternative connection/monitoring**
CVBS Service Video output for convenient installation, and ease of service**
Operation over ‘almost any’ wire
- Over 1000 feet on standard RG59 coax; longer distances on RG6
- Up to 500’ on one pair from a Cat5e cable (using optional KA-HDBAL1 balun pair).
1/3” progressive scan CMOS sensor with .01 lux native light sensitivity
Up the cable controlled motorized zoom 5~50mm Megapixel lens with zoom speed control (6.2°~59.8° FOV)
Auto-focus lens with minimum focus distance control; manual, one-touch or full auto modes; plus 64 lens presets
120dB True Wide Dynamic Range to handle the most challenging of bright or unbalanced lighting conditions**
Digital slow shutter (Sens-Up) low light enhancement (Use of more than 2~4X enhancement should be limited to select
applications.)
True Day/Night zero light operating range of 394 feet or more (depending on scene reectivity) from Super Beam IR LEDs
Smart IR automatic exposure level adjust to achieve the desired scene brightness despite reections and bright spots
Easy mounting using 3-Axis positioning for convenient wall or ceiling mounting
Simple and easy to use OSD setup menu
- Local 3-axis joystick inside access cover
- Up-the-cable control from OMNI EZHD recorders (or other compatible UTC control equipment)
- True Wide Dynamic Range for bright or unbalanced scene lighting conditions**
- Digital Wide Dynamic range option
- Programmable Back Light Compensation (BLC) and Highlight Suppression Back Light Compensation (HSBLC)
- Adjustable 3D + 2D Noise Reduction to increase low light picture clarity and conserve DVR HDD disk space
- Privacy masking for 8 congurable zones
- Lens shading compensation for even exposure out to the lens periphery
- Defog improves image contrast in the presence of haze or smoke that obscures image details
Smart Digital Zoom** expands selected areas within the eld of view to full screen when motion is detected
Dual 24VAC/12VDC operation drawing only 20W
IP66 weather resistant, vandal resistant construction
Operating temperature range of -40°F~140°F with built in heater (can be set for auto/on/o)
Optional KA-BRJB2 Junction Box; or optional KA-BRPM1 Pole Mount with or without a junction box
Ordering Information
KEZ-c2BR5M50XIR: 5-50mm Bullet with 390’+ EXIR Range
www.ktncusa.com
Dimensions: Inches (mm)
KEZ-c2BR5M50XIR Specications
Accessories:
HD-TVI
Imaging Device 1/3" Progressive Scan CMOS
Video Format
Eective Picture Elements 1920 (H) x 1080 (V) Horizontal Resolution More than 1080 HTVL Sensitivity 0 lux IR on; .01 lux @ F1.2 (AGC On) Day/Night Type True Day/Night with ICR motorized lter control
Lens
IR LED Two Super Beam LEDs, 850nm (Can be disabled in OSD if desired) IR Range 394’ / 120m (As with all IR cameras, IR range will vary based on scene IR reectivity and illumination) Smart IR Exposure Adjust Active when IR enabled S/N Ratio Over 62dB Video Output Connector Type TVI & CVBS: BNC 75Ω
Sync. Mode Internal OSD Menu Multiple functions using 3-axis joystick under access cover; UTC Control OSD Languages English, Chinese UTC Control Full OSD Menu access via up-the-cable (Coaxitron® type ) signaling Scene Optimization Choose: Indoor, Outdoor
WDR/ BLC/HSBLC
Auto Gain Control 0~15 Electronic Shutter Auto (Iris Priority); or manual 1/30 (25), FLK, to 1/50,000 White Balance ATW; AWC->SET; Manual Color Correction Nominal Gamma 0.45, adjustable; or, separate adjustment for red and blue levels Day & Night Auto True D/N with motorized ICR, controlled by photo sensor; IR LEDs may be disabled.
Digital Slow Shutter [DSS]/Sens-Up DSS low light boost O/Auto 0~13* *High Sens Up levels should be used only after careful consideration of scene dynamics 2D-DNR On/O 3D-DNR O/On: Smart Noise Reduction with adjustable level; adjustable AGC range limits Digital Zoom 2X~62X with virtual P/T (area selection)
EZ Digital Zoom**
Brightness 1~14 Defog Adjustable area size/position; gradient o, low, middle, high Digital Wide Dynamic Range On/O Mirror O / H-ip, V-ip, rotate Motion Detection O/On for 4 programmable zones (pixel change detection) Privacy Mask O/On with full programmability for 8 selectable zones Lens Shading Compensation) O/On DPC (Defective Pixel Correction) Live mode with level adjust; static mode with level, DSS and AGC adjust Other OSD Functions Flickerless; Camera Title with position, Font Color; Image Sharpness; CRT/LCD display optimization; Negative Image Power Source 12VDC/24VAC +/-15% Power Consumption 12VDC:1.67A ; 24VAC: 20W Operating Temperature -40 °F ~ 140 °F (-40 °C ~ 60 °C) Heater Heater may be controlled via OSD: O/On/Auto Environmental IP66 weather resistant Mechanical Metal body with plastic access port for 3-axis OSD joystick controls and external lens adjust, CVBS video test point, and switch to toggle WDR state. Positioning 3-axis exible positioning for wall or ceiling mounting Pan: 0~360° Tilt: 0~90° Rotate: 0~360° Dimensions Body 12.3” × 4.2” × 4.0” [313.5 × 107.3 × 100.8mm]; base 4.14”Ø (105.2mm) Weight 3.6 lbs./1.65Kg Mounting Options Optional KA-BRJB2 Junction Box; or optional KA-BRPM1 Pole Mount with or without a junction box Certications CE / FCC / RoHS
Main Output: 1080p30/25 HD-TVI (30/25Hx OSD selectable) Secondary Output: CVBS (OSD selectable NTSC/PAL) aux video, plus test point**
Type: Megapixel Motorized 10X Autofocus Type 5~50mm IR corrected Angle of View: 59.8°(5mm) ~ 6.2°(50mm) Zoom Speed: User selectable range 1~8 Presets: Up to 64 zoom presets can be stored Focus mode: Auto, Manual or “One Touch” (Trigger) Modes Zoom Ratio Display: OSD controlled O/On Minimum Focus DistanceOSD controlled .1, .3, 1, 1.5, 3, 6, 10 or 20m
Test Video**: CVBS video test point inside access cover, cable to BNC supplied
WDR: 120dB WDR O/On** BLC: Low, Middle, High with adjustable area size/position HSBLC: On/O for 4 areas, adjustable area size/position and level; full time or night-only
Optional color-only and B/W only modes under OSD control
Select 1 or 2 programmable areas with sensitivity level; while in-area motion/pixel change is detected, image zooms to full screen display of select­ed area and holds for user selected time; size of area to be shown full screen selected denes zoom ratio when active.
**True WDR processing and downscaling from 1080p to CVBS both demand significant processor resources. CVBS output and digital zoom are disabled when True WDR is active; where full time CVBS output is desired, Digital WDR is an OSD menu option. WDR status is easily controlled from a switch provided next to the CVBS test point and OSD joystick.
KA-BRPM1
Pole Mount
KA-BRJB1
Power Intake Box Large Bullet
KT&C America, Inc. reserves the right to make changes to improve our products at any time without notice; we are not responsible for misprints.
www.ktncusa.com
Loading...