KT&C KA-BRPM1 Specsheet

KA-BRPM1

Model

Parameter

Vertical Pole Mount Bracket

Appearance

Range of
Application

Material

Aluminum Alloy

Dimension

Weight

A

Vertical Pole Mount Bracket

Features:

 For pole mounting
 The clasp is made of stainless steel
 Mounting board is made of aluminum die-casting alloy

Dimension:

Order Model:

KA-BRPM1

Parameter:

KA-BRPM1

White

It can be used with some wall mount

bracket Diameter of clamp: Φ2 5/8"-5"

5"×1 13/16"×9 13/16"

2.66lbs

Notice:

 The site of screw hole should be noticed when using with

wall mount bracket

 Load capacity of pole should be more than 3 times the

weight of camera and bracket

 Load capacity of clamp is 10KG

Installation Step:

① Contrarotate the rotary knob ② Thread the clamp through the hole ③ Clasp the clamp around the pole and rotate

and open the clamp of mounting board the rotary knob clockwise for tightening

Note: The actual bracket may vary from the picture above.

A: Rotary knob

This bracket can be used with some wall mount bracket to realize vertical pole mount, which is as followed: