Krups SAVOY ET353 Instruction Manual
ENFRES
SAVOY
ET353
www.krups.com
r
NC00136996 - Réalisation : Espace Graphique
www.krups.com
EN.............................................................................. p. 7
FR .............................................................................. p. 16
ES .............................................................................. p. 26
KR_CAFETIERE_ET353_NC00136996.qxp_Mise en page 1 13/09/2016 16:17 PageC1
11 12 13
19
161514
17 18
21a 21b20a 20b
22
1 2 3
6
4
10a 10b
7 8
9
5a 5b
KR_CAFETIERE_ET353_NC00136996.qxp_Mise en page 1 13/09/2016 16:17 PageC4
23
24 25
29
26
27
30
28
31
PAGE
1. IMPORTANT SAFEGUARDS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. DESCRIPTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. SETTING THE CLOCK
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. BEFORE FIRST USE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. MAKING COFFEE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. OTHER FEATURES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6A AUTO START FUNCTION
6B REGULAR OR BOLD
6C 1 - 4 CUPS
7. CLEANING
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8. DESCALING
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9. TROUBLESHOOTING
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10. KRUPS INTERNATIONAL LIMITED WARRANTY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TABLE OF CONTENTS
7
EN
1. IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and/or injury to persons
including the following:
■ Read all instructions.
■ Do not touch hot surfaces. Use handles or knobs.
■ To protect against fire, electric shock and injury to persons, do not immerse cord,
plugs or machine in water or other liquid. Close supervision is necessary when
any appliance is used by or near children.
■ Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.
■ Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or adjustment.
■ The use of accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to persons.
■ Do not use outdoors.
■ Do not let cord hang over edge of table or counter, or touch hot surfaces.
■ Do not place on or near a hot gas or electric burner, or in a heated oven.
■ Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn any control to the “off” position, then remove plug from wall
outlet.
■ Do not use appliance for other than intended use.
■ Scalding may occur if the lid is removed during the brewing cycles.
SAVE THESE INSTRUCTIONS
CAUTION
This machine is intended for household use only. Any servicing other than
cleaning and user maintenance should be performed by the nearest authorized
KRUPS Service Center. Visit our website at www.krupsusa.com in the USA or
www.krups.ca in Canada or contact your respective country’s Consumer Service
department for the service center nearest you, or contact your respective
country’s Consumer Service department. To reduce the risk of fire or electric
shock, do not attempt to disassemble the machine.
Repair should be done by an authorized KRUPS Service Center only.
SHORT CORD INSTRUCTIONS
A. A short power cord or a detachable power cord is provided to reduce the risks
of becoming entangled in or tripping over a longer cord accidentally.
B. Longer detachable power cords or extension cords are available and may be used
if care is exercised in their use.
C. If a long detachable power cord or an extension cord is used:
1) the marked electrical rating of the detachable power cord or extension cord
should be at least as great as the electrical rating of the appliance.
8
2) If the appliance is of the grounded type, the extension cord should be a
grounding type 3-wire cord.
3) the longer cord should be arranged so that it will not drape over the counter
where it can be pulled on by children or tripped over accidentally. The
appliance may have a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in anyway.
ADDITIONAL SAFETY INSTRUCTIONS
■ This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
■ Your appliance is designed for domestic use only.
It is not intended to be used in the following applications, and the guarantee will
not apply for: staff kitchen areas in shops, offices and other working
environments; farm houses; by clients in hotels, motels and other residential type
environments; bed and breakfast type environments.
■ This appliance is not designed to be used by children or people without
knowledge or experience with the product, unless they are supervised or given
prior instructions concerning the use of the appliance by someone responsible
for their safety.
■ Burns can occur from hot water or steam. Exercise caution.
■ All machines are subject to stringent quality control. Practical tests using
machines taken at random are conducted and this may explain any slight marks
or coffee residue showing prior to use.
■ Do not pour liquids other than water and descaling solutions specified in this
manual into the water tank.
■ Protect the machine against humidity and freezing.
■ Do not pour water into the appliance if it is still hot.
■ Always place your coffee maker on a flat, stable, heat resistant work surface away
from water splashes and any external sources of heat.
■ Never place your carafe or your insulated pot in a microwave oven, in a
dishwasher or on a stove top.
■ Never put your hand inside the insulated pot.
■ Do not use the carafe or the insulated pot without the lid.
■ In the interest of improving products, KRUPS reserves the right to change
specifications without prior notice.
■ A short power supply cord is provided to reduce the hazards resulting from
becoming entangled in or tripping over a long cord.
9
EN
■ Place the coffee maker on a hard flat surface.
■ Connect the power cord to a 120V wall socket.
1 - When you plug in the coffee maker for the first time, "1:00 pm" will start flashing on the display. Fig. 1.
Set the time by pressing the
H button (n) to set the hour and the MIN button (o) to set the minutes.
The time will appear on the display. It will be automatically set after 5 seconds or by pressing the
BREW button (l).
2 - You can also set or change the time at any other time. Set the time by pressing the
H button (n) to set
the hour and the
MIN button (o) to set the minutes. The time will appear on the display. Figs. 2 and
3. It will be automatically set after 5 seconds or by pressing the
BREW button.
NB: Your clock is now set and will continue to show the time, even when your machine is in standby mode.
If the machine is unplugged or there is a power failure, the clock will revert to 1:00 pm. Repeat the steps
above to reset the clock.
■ Remove stickers from your coffee maker.
■ Before using your coffee maker for the first time, run a cycle without coffee to rinse the circuit. Fill the water
tank to the maximum level and start a cycle by pressing the
BREW button (l).
IMPORTANT : Your machine has been designed to work with cold or water at room temperature only.
■ Open the coffee maker lid (b). Fig. 4.
■ Open the lid of the thermal carafe by twisting the lid so that the arrow and the word 'OPEN' are aligned.
Fig. 5a.
■ Fill the thermal carafe (g) with cold or warm water and close the lid by aligning the arrow with the word
'OPEN', then by twisting the lid so the arrow is aligned with the word 'CLOSE'. Fig. 5b. Pour water
into the water reservoir by pressing the lever on the lid of the thermal carafe so the water starts
flowing. Figs 6 and 7. The number of cups is shown by the water level indicator. Do not exceed 12 cups.
Fig. 8.
■ Place the thermal carafe (g) with its closed lid onto the base (i) making sure that it is properly positioned
so as to activate the coffee pouring mechanism. Fig. 11.
■ Make sure that the filter holder (j) is inserted. Fig. 9. Insert the permanent filter (k) Fig. 10a or a #4 paper
filter into the filter holder (j). If using a paper filter, make sure it is fully opened and properly positioned in
the filter holder. Fig. 10b.
2. DESCRIPTION
a
Machine body
b
Lid
c
Water tank
d
Water level indicator
e
Thermal carafe lid
f
Thermal carafe handle
g
Thermal carafe
h
Lever for the Thermal carafe lid
i
Base
j
Filter holder
k
Permanent filter
l
BREW
button
m
AUTO ON
button
n
H
button
o
MIN
button
p
BOLD
button
q
1 - 4
cups button
r
CLEAN
button
s
Filter cartridge holder
t
Filter cartridge
u
Cartridge replacement indicator
v
Spoon
3. SETTING THE CLOCK
4. BEFORE FIRST USE
5. MAKING COFFEE
10
■ We recommend removing the filter holder with the filter before adding the ground coffee. If you accidentally
pour ground coffee into the water tank, do not start the cycle. Clean the tank, otherwise the coffee may
block the water circuit.
■ Add 1 KRUPS spoon (v) of ground coffee per cup. Do not exceed 12 spoons (2 ounces). Fig. 12.
■ Close the lid (b).
■ Press the
BREW button (l). The BREW button light will come on to show that the coffee maker has
started the brew cycle. The machine will beep once. Fig. 13.
■ At the end, your machine will beep 3 times and the BREW button (l) will turn off. Your coffee maker will
stop automatically a maximum of 5 minutes after the brewing cycle ends, i.e. 5 minutes after the reservoir
is completely empty.
■ Remove the thermal carafe from the coffee maker so that the coffee is kept hot in the best conditions
possible.
■ In order to pour coffee from the thermal carafe, press the lever on the lid. Fig. 19.
■ This thermal carafe can keep your coffee hot for up to 4 hours.
NB:
- The amount of coffee in the thermal carafe at the end of the cycle is less than the amount of water poured
into the tank because about 10% is absorbed by the ground coffee and the filter.
- There is an overflow hole on the back of the water tank. If you add too much water, it will leak out of this hole.
- To ensure maximum heat retention, rinse the thermal carafe with hot water before use and close the lid by
twisting it clockwise.
- Clean the permanent filter between each use or use a new paper filter.
CAUTION:
- To avoid any overflow, the thermal carafe must be properly positioned on the base of the coffee
maker, otherwise it could cause hot water or hot coffee to overflow.
- The coffee maker becomes very hot during the brew cycle. Please handle with care.
6a – AUTO START FUNCTION
Programming the auto-start settings.
■ Your appliance is equipped with auto-start program.
■ Check whether the clock is set to the right time. If not, follow the instructions in the SETTING THE CLOCK
section.
■ Press the AUTO ON (m) button. The AUTO icon will appear on the display. Figs 14-15-16.
■ Set the time by pressing the
H button (n) to set the hour and the MIN button (o) to set the minutes.
Set the program by pressing
BREW (l).
■ Starting a auto-on function when time has already been set.
- See the section MAKING COFFEE.
- Press
AUTO ON, then press BREW (l).
■ To cancel the auto-start function, press twice the
AUTO ON button or press the BREW button.
6b – REGULAR OR BOLD
■ The BOLD function increases the cycle time for stronger coffee.
■ Press the BOLD (p) button to select the strength of your coffee. Fig. 17.
■ The BOLD button lights up (p).
■ The function is stored in the memory for subsequent cycles.
■ To cancel the BOLD function, press the BOLD button again.
6c – 1 - 4 CUPS
■ This function is specially designed for making small volumes of coffee, i.e. between 2 and 4 cups. It makes
it easier to extract optimal aroma and flavor.
■ To activate this function, press the
1 - 4 cups button (q) before starting the cycle. Fig. 18.
6. OTHER FEATURES
11
EN
■ The 1 - 4 CUPS button lights up.
■ To cancel the 1 - 4 cups function, press the 1 - 4 CUPS button again.
■ To remove the used coffee grounds, remove the filter and the filter holder from the coffee maker. Figs 20a.
and 21a.
■ Throw the coffee grounds and filter paper in the garbage. Figs 20b. and 21b.
■ Do not clean the machine if it is still hot.
■ Wash the removable filter holder and the permanent filter in warm soapy water.
■ Handle the thermal carafe with care: add a small amount of dish detergent and some water and stir gently.
Use a soft brush to remove any stains. Use a non-abrasive sponge.
■ If the carafe is very stained, fill it with boiling water. Add a dishwasher tablet and let it soak for about an
hour. Then rinse thoroughly.
■ Do not clean the carafe in a dishwasher and do not immerse it in water.
CAUTION: Do not place the thermal carafe in the microwave.
Do not put parts of the coffee maker into the dishwasher.
■ Clean the coffee maker with a damp cloth or sponge. Never use abrasive or strong products on any part
of the coffee maker.
■ To clean the stainless steel parts of your coffee maker, dampen a soft cloth or sponge with warm water.
Wipe carefully with a dry cloth.
■ For difficult stains, use a cloth with white vinegar.
■ Do not immerse the appliance in water or under the tap.
■ Why descale?
- Limestone forms naturally in your coffee maker. Descaling preserves the coffee maker and ensures it will last
longer and provide quality coffee over time. Limestone can permanently affect the machine's performance.
Malfunctions associated with scaling will not be covered by the warranty if the product is returned.
■ When to descale?
- When your machine needs descaling, the
CLEAN button (r) light will come on.
- The descaling frequency depends on the hardness of the water and the number of brew cycles. If you notice
the following signs: longer cycle time, excessive steaming, more noise at the end of the cycle, stopping midcycle, this means your machine is scaled.
- Your coffee maker should be descaled around once a month depending on the hardness of the water.
- If your machine needs descaling, the
CLEAN button (r) light will flash 3 times at the end of the cycle.
NB: If you press the BREW button (l) while the CLEAN button (r) light is on, the descaling cycle
will start instead of the brew cycle.
How to descale your KRUPS coffee maker
■ Remove the filter cartridge (t). Figs 22 and 23.
■ Use the KRUPS® descaling solution or 17 fl. oz of white vinegar diluted in 17 fl.oz of cold or water at room
temperature or 1.5 oz of citric acid diluted in 17 fl. oz until complete dissolution of crystals. Fig. 24.
■ Pour the solution into the water tank (without coffee). Fig. 25.
■ Press the
CLEAN button (r) followed by the BREW button (l) to start the descaling cycle. Fig. 26.
■ The cycle lasts for 30 min.
■ Wait until the end of the cycle.
■ If the water tank is not empty, please launch another descaling cycle by pressing
CLEAN button (r).
■ To rinse the machine, run 2 full 12 cups cycles with water but without coffee. Fig. 27.
■ Repeat if necessary.
8. DESCALING
7. CLEANING
12
■ Put the filter cartridge back. Figs 30 and 31.
■ The warranty does not cover coffee makers that do not work, or do so poorly, due to lack of
descaling.
Filter cartridge
■ Your machine can filter water using a DuoFilter: a double action filter (reduces chlorine and scaling)
formulated with active plant ingredients. This DuoFilter allows you to enjoy the subtle aromas of your coffee
and reduces the descaling frequency.
NB: There is a rotary indicator on the top of the water filter holder that shows when you should
replace your DuoFilter.
■ Select the number of the month when you replace the filter. The month when you should change your filter
depending on the hardness of the water will then be indicated. Fig. 29.
■ To change the filter, remove the filter cartridge from the tank. Fig. 30.
■ Open it by pulling the bottom part and change the filter. Figs 30 and 31.
IMPORTANT:
The DuoFilter must only be used with water.
Your coffee machine will still work if the water filter is not installed.
If you have not used your coffee machine for over a month, rinse the DuoFilter in running water.
We do not recommend leaving the same DuoFilter in your machine for over 5 months.
The duo filter can cause the water to flow slow, excess steam, high noise lever. The filter may
need to be replace.
9. TROUBLESHOOTING
PROBLEM SOLUTION
The coffee does not brew or
the appliance does not turn
on.
■ Make sure the appliance is well connected to a working outlet and that
it is in the "ON" position.
■ The water tank is empty.
■ There is a power outage.
■ Unplug the machine, then plug it back in.
■ The clock should be reprogrammed after a power outage.
■ The automatic stop feature has turned off the appliance. Turn off the
appliance and then turn it back on to make more coffee. For more
information, please consult the "Making Coffee" section.
The appliance seems to leak.
■ Make sure the water tank has not been filled beyond the maximum
limit.
Brewing takes a long time.
■ It may be time to descale the appliance.
■ Several minerals can accumulate in the coffee maker's circuitry.
Regular descaling of the machine is recommended. This may need to be
done more often depending on the hardness of your water. For more
information, please consult the "Descaling" section.
CAUTION: do not take the appliance apart.
Loading...