Krups BW730 User Manual

www.krups.com

NC00111276

English . . . . . . . . . . . . . . . . . . p. 4

Français . . . . . . . . . . . . . . . . . p. 12

Español . . . . . . . . . . . . . . . . . p. 20

BW730

Réalisation : Espace Graphique

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:38 PageC1

English

FECHA DE COMPRA :

CANADA

GROU PE SEB

CANADA

345 Passmore Avenue

Toronto, ON

M1V 3N8

MEXICO

Groupe SEB MEXICO

S.A. de C.V.

Goldsmith 38 Desp.

401 Col. Polanco

Delegacion Miguel

Hildalgo

11 560 Mexico D.F.

MEXICO

U.S.A.

GROU PE SEB USA

2121 Eden Road

Millville, NJ 08332

1-800-418-3325 01800 1128325 800-526-5377

TABLE OF CONTENTS

1. IMPORTANT SAFEGUARDS .......................................................................................p. 5

2. DESCRIPTION .................................................................................................................p. 7

3. BEFORE FIRST USE.......................................................................................................p. 7

4. USING YOUR KETTLE....................................................................................................p. 7

5. CLEANING AND MAINTENANCE ...............................................................................p. 8

6. DESCALING ......................................................................................................................p. 9

7. TROUBLESHOOTING ...................................................................................................p. 9

8. DISPOSING OF YOUR APPLIANCE .........................................................................p. 9

9. MANUFACTURER’S WARRANTY...............................................................................p. 10

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:39 PageC4

Thank you for purchasing a KRUPS kettle. Please read the instructions carefully and keep them at hand.

1. IMPORTANT SAFEGUARDS

n Always read the instructions before first use and keep them handy for future reference. n Only use the kettle to heat water. Never heat other liquids in the kettle. n Only plug the kettle into a grounded power outlet. Check that the voltage on the rating

plate of the appliance corresponds to that of your electrical installation.

n Keep the kettle and its power cord away from any source of heat, from any wet or slippery

surface and away from sharp angles.

n Your kettle should only be used with its lid locked, with the base and the anti-scale filter

supplied.

n Never immerse the kettle, its base or the power cord and plug in water or any other

liquid.

n Never use the appliance in a bathroom or close to a water source. n Never use the kettle when your hands or feet are wet. n Never place the kettle or its base on a hot surface such as a hotplate or use it near an

open flame.

n Place the kettle and its power cord well to the back of the work surface. n Always unplug the power cord immediately if you observe any anomaly during operation. n Never pull on the power cord to remove it from the wall outlet. n Never leave the power cord hanging from a table top or kitchen counter to avoid any

danger of it falling to the floor.

n Always remain vigilant when the appliance is on, and in particular be careful of the steam

coming out of the spout which is very hot.

n Also be careful as the body of stainless steel kettles becomes very hot during operation.

Only touch the handle of the kettle.

n Never leave your hand or the power cord on the hot parts of the appliance. n Never leave the kettle connected to its base during filling, pouring, cleaning or moving. n Always use the filter during heating cycles. n Never touch the filter or the lid when the water is boiling. n Never open the lid when the water is boiling. n Never move the kettle when it is in operation. n Protect the appliance from dampness and freezing.

Never use the kettle if the power cord or the plug are damaged. To avoid any danger, always have them replaced by an authorized KRUPS After Sales Service Center. n If your appliance has been damaged or if it is not working properly, do not use it and

never attempt to disassemble it. We recommend that you have the appliance inspected. Any work required on the appliance, except for cleaning and de-scaling according to the instructions for use must be performed by a KRUPS After Sales Service Center.

n The warranty covers manufacturing defects and residential use only. Any breakage or

English

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:40 Page5

damage resulting from a failure to comply with these instructions for use is not covered by the warranty.

n Any supply connection error will void the warranty. n The warranty does not cover kettles that fail to operate or operate badly due to a failure

to perform de-scaling operations.

n Unplug the appliance if you intend to not use it for an extended period or during cleaning

operations.

n Never use scouring pads for cleaning purposes. n To remove the anti-scale filter, remove the kettle from its base and allow it to cool down.

Never remove the filter when the appliance is filled with hot water.

n Never use any de-scaling method other than the one recommended. n All appliances are subject to strict quality control procedures. These include actual usage

tests on randomly selected appliances, which would explain any traces of use.

n This appliance is not designed to be used by children or people without knowledge or

experience with the product, unless they are supervised or given prior instruction concerning use of the appliance by a person responsible for their safety.

n Keep the appliance out of reach of children. n Children should be supervised to ensure that they do not play with the appliance. n Never heat the kettle when it is empty. n Never fill the kettle past the maximum water level mark, nor below the minimum water

level mark. If the kettle is too full, some water may spray out.

n Your appliance is designed for residential use only.

SAVE THESE INSTRUCTIONS

CAUTION

This machine is intended for household use only. Any servicing other than cleaning and user maintenance should be performed by the nearest authorized Krups Service Center. Visit our website at www.krupsusa.com in the USA or www.krups.ca in Canada or contact your respective country's Consumer Service department for the service center nearest to you, or contact your respective country’s Consumer Service department. To reduce the risk of fire or electric shock, do not attempt to disassemble the machine. Repair should be done by an authorized Krups Service Center only.

SHORT CORD INSTRUCTIONS

A.A short power cord or a detachable power cord is provided to reduce the risks

of becoming entangled in or tripping over a longer cord accidentally.

B.Longer detachable power cords or extension cords are available and may be

used if care is exercised in their use.

C. If a long detachable power cord or an extension cord is used:

1) the marked electrical rating of the detachable power cord or extension cord should be at least as great as the electrical rating of the appliance.

2) If the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord.

English

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:40 Page6

3) the longer cord should be arranged so that it will not drape over the counter where it can be pulled on by children or tripped over accidentally.

The appliance may have a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in anyway.

n Krups reserves the right to modify the characteristics or components at any time in

the interests of the consumer.

2. DESCRIPTION

3. BEFORE FIRST USE

n Remove all packaging and accessories both inside and outside the kettle. n Adjust the length of the power cord by coiling the excess under the base. The powercord should extend

from the base through the slot in the back. (fig. 1)

n Rinse the inside of the kettle and the limescale filter (located in the spout) several times. Boil 2 or 3

kettles of water and discard to remove all manufacturing residues and dust.

n Wipe the outside of the kettle and the base with a clean damp cloth. To avoid damage to the electronics,

avoid exposing the base of the kettle or the bottom of the kettle to excess water.

4. USING YOUR KETTLE

1- Place the kettle base on a stable, clean surface away from heat sources. Connect the plug into an

outlet.

Note: The kettle (a), kettle base (b), and limescale filter (e) are specifically designed to be used together and other accessories not designed for use with the kettle should not be used.

2- Open the lid by pressing the lid release button (f) on the handle (g) (fig. 2). Fill the kettle with the

desired amount of water (fig. 3). Close the lid (c) by pushing the lid plastic cover (d).

CAUTION: The lid can be hot. Do not touch the stainless steel part of the lid. Always push the lid plastic cover (d) to close the lid.

English

a Kettle b Base c Lid d Lid plastic cover e Limescale filter f Lid release button g Handle h Water lever indicator i On/Off switch

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:40 Page7

Notes:

n Always remove the kettle from the base before filling it with water. n

Never use without water or fill with liquids other than water. When filling the kettle, take care to not expose the electrical connections at the bottom of the kettle to water.

n You can also fill the kettle with water through the spout. n Do not fill the kettle beyond the maximum level, or below the minimum level marked on the water level

indicator (h) If the kettle is overfilled, boiling water may splash outside of the kettle.

n Always use the kettle with its lid closed.

3- Place the kettle on its base. 4- Press the On/Off switch (i) located at the bottom of the kettle under the handle (g). (fig. 4). The blue

LED light on the water windows (h) will switch on. The boiling cycle starts.

5- At the end of the boiling cycle, the blue LED light will automatically turn off and the On/Off switch (i)

will go back to the Off position.

Note: At any time during the boiling cycle, you can manually stop the boiling cycle, simply by lifting the On/Off switch (i) to its Off position.

6- Remove the kettle from its base before pouring. 7- To avoid the risk of splashing, pour boiled water slowly and don’t over-tilt the kettle.

CAUTION: A dry boil cut-off system will automatically switch the kettle off.

5. CLEANING AND MAINTENANCE

DO NOT LEAVE WATER IN THE KETTLE AFTER USE. EMPTY THE KETTLE AFTER EACH USE TO REDUCE ACCUMULATION OF LIMESCALE DEPOSITS.

To clean the kettle and base

n Always unplug the base and allow the kettle to cool before cleaning. n Avoid exposing the base or the bottom of the kettle to excess water. To protect against risk of electrical

shock, do not immerse the base in water or any other liquid, or place under running water to clean. Wipe clean with a damp sponge and a small amount of gentle dishwashing liquid if necessary. Never clean with harsh or abrasive cleaners or sponges. Dry all parts carefully before next use.

To clean the limescale filt er © (fig. 5)

n Always unplug the base and allow the kettle to cool before cleaning. n The limescale filter is a removable mesh filter in the spout of the kettle. This filter does not treat or

remove the scale from the water, it traps the scale particles from being poured out.

n With very hard water, the filter may need to be cleaned as often as 10-15 uses. If the filter is wet, run

under lukewarm water to remove particles. If filter is dry, brush gently to remove particles. To avoid damaging the mesh, do not scrub the filter.

n To remove excessive scale, descale as described below.

English

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:40 Page8

6. DESCALING

n For best performance, descale regularly. The amount of scale that develops depends on the hardness

of your water and how frequently the kettle is used. Descale regularly, preferably at least once a month, more often if your water is very hard. Keep in mind that you may have to descale more often than indicated based on your water.

To descale your kett le or filter:

n Always unplug the base and allow the kettle to cool before cleaning. n Use plain white vinegar at room temperature. When descaling the kettle, fill with 2 cups of white vinegar

and leave for one hour without heating. For the filter, remove the filter from the spout, and soak with 1 cup of white vinegar for one hour in a small cup or bowl.

n Rinse kettle and filter very well with room temperature water multiple times until completely clean.

Repeat if necessary and allow to dry before next use.

The warranty excludes kettles which have stopped working or do not work properly due to lack of descaling.

7. TROUBLESHOOTING

n If the On/Off switch (i) does stay in its On position

- Check that the kettle is well placed on its base.

- If the kettle is hot and contains water, leave the kettle to cool down for a few minutes and turn it on again.

- If the kettle is hot and does not contain water, leave the kettle to cool down for a few minutes. Fill the kettle with cold or room water and turn it on again.

n The boiling cycle doesn’t start and the water windows LED lights remain switched off

- Check that the kettle is well placed on its base.

- Check that the power plug is well connected to a working outlet.

- Check that the On/Off switch (i) is on ON position.

n The kettle doesn’t stop

- Check that the lid (c) is well closed.

IF YOUR KETTLE HAS FALLEN, IF IT IS LEAKING, OR IF THE POWER CORD, PLUG OR BASE ARE VISIBLY DAMAGED

n Consult the nearest KRUPS After Sales Service Center and the warranty included at the end of these

instructions.

n Do not use the kettle. No attempt should be made to disassemble the product or override the safety

devices. If the power cord is damaged, it must be replaced by the manufacturer, a KRUPS After Sales Service Center.

8. DISPOSING OF YOUR APPLIANCE

Your appliance contains valuable materials which can be recycled. Consult your local waste collection center for correct disposal procedure and recycling options.

English

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:40 Page9

9. MANUFACTURER’S WARRANTY

: www.krups.com

With a strong commitment to the environment, most of Krups products are

repairable during and after the warranty period. Before returning any defective

products to the point of purchase, please call Krups consumer service directly

at the phone number below for repair options.

Your help to sustain the environment is appreciated!

After sales service

The appliance isn't user-serviceable. If it's not working properly, check that:

- You've followed the instructions correctly;

- The main supply fuse/circuit breaker hasn't blown/tripped. If it still doesn't work, consult your retailer.

The Warranty

This product is guaranteed by Krups for a period of 2 years against any manufacturing defect in materials or workmanship, starting from the initial date of purchase.

The manufacturer's warranty by Krups is an extra benefit which does not affect consumer's Statutory Rights.

The Krups warranty covers all costs related to restoring the proven defective product so that it conforms to its original specifications, through the repair or replacement of any defective part and the necessary labor. At Krups’s choice, a replacement product may be provided instead of repairing a defective product. Krups’s sole obligation and your exclusive resolution under this warranty are limited to such repair or replacement.

Conditions & Exclusions

The Krups warranty only applies within USA, Canada & Mexico, and is valid only on presentation of a proof of purchase. The product can be taken directly in person to an authorized service centre or must be adequately packaged and returned, by recorded delivery (or equivalent method of postage), to a Krups authorized service centre. Full address details for each country’s authorized service centre are listed on the Krups website (www.krups.com

) or by calling the

appropriate telephone number listed below to request the appropriate postal address.

Krups shall not be obliged to repair or replace any product which is not accompanied by a valid proof of purchase.

This warranty will not cover any damage which could occur as a result of misuse, negligence, failure to follow Krups instructions, use on current or voltage other than as stamped on the product, or a modification or unauthorized repair of the product. It also does not cover normal tear and wear, maintenance or replacement of consumable parts, and the following:

-using the wrong type of water

-scaling (any de-scaling must be carried out according to the instructions for use);

-ingress of water, dust or insects into the product;

English

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:40 Page10

+ 18 hidden pages

Krups BW730 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual