Kraus KSD42SS Installation manual

Soap and Lotion Dispenser

Soap and Lotion
Dispenser

KSD

-42

KSD

-42

Dimensions:

Overall Heigh
Diameter : 2.2”

t: 11.0”

Spout Heigh
Spout

Reach: 3.4”

t: 2.3”

Tools and Supplies you will need:

Adjustable Wrench

Step 1

Remove soap bottle (6) from dispenser base (2). Pull pump head (1) out of
dispenser base (2). Unthread nut (5) from the bottom of dispenser base (2) and

remove flat washer B (4)

Step 2

Brass Pump
Head (1)

from underneath sink or countertop. Tighten
with adjustable wrench until snug

Install dispenser base
(2) into hole (either
on escutcheon plate
or in countertop). Reinstall
flat washer B (4) and nut (5)

Item NO.:

Dispenser
Base (2)

Flat Washer A (3)

Flat washer B (4)

Nut (5)

Soap Bottle (6)

Step 3

Thread soap bottle (6)
onto dispenser base
(2) from underneath
sink or countertop.
Hand-tighten only

Step 4

Fill soap bottle
(6) from top with
8 ounces of soap
or lotion

Step 5

Insert pump head
(1) into dispenser
base (2) from top

CH

BN
ORB
GRB

1.800.775.0703
[e-mail]

www.kraususa.com